I didn t turn on the faucet but the sewer pipe kept leaking

Sewer pipe joint leakage: This part is a high incidence of water leakage and water seepage, because it is the interface of the water pipe, it may be connected to other water pipes or faucets, so the water pipe will be used for a long time, and water leakage will occur due to aging and damage. If it is found that the sewer joint is leaking after inspection, you can cut off the end of the bad water pipe first, and then install the new water pipe according to the alignment; Loose sewer joints:

This is a relatively normal and easy to find place, if there is a water leakage, you can clearly see the water droplets on the water pipe and the water on the ground, the water pipe joint is loose, so sometimes it will cause water leakage at the water pipe joint. Just find the loose water pipe fitting and find the tool to tighten it tightly; Sewer pipe joints are frozen and cracked: this is relatively rare in men, but it is very common in the north, especially in winter, the sewer pipes of many northern families will be frozen, and the water pipes are exposed to the sun, the water pipes are easy to freeze and crack, so there will be water leakage, at this time, you can choose a protective film that can keep warm to wrap the water pipe joints, which can reduce the occurrence of this situation;

Although the faucet is not turned on, the sewer pipe keeps leaking, which must be caused by the loose closure of the place where the sewer pipe is connected.

We should check the connection of the sewer pipes well, disassemble them, wrap them with the suit, and then let the water pipes be connected, so that the problem of water leakage can be well solved.

Is there only one sewer pipe that keeps leaking, or is it that all the sewer pipes have this?

If it's just a sewer pipe, and there's water flowing on the floor, and the faucet isn't turned on, it's likely that the water pipe inside the wall is broken, so it's coming.

If you have water near all the sewer pipes, that is, all the places where there is dripping, it is probably that the sewer mains under you are blocked.

This is the water pipe in our upstairs wall, after the crack and leakage, the water will naturally penetrate into the downstairs through the wall, so the downstairs has been dripping, which is to find some professional repair water pipe some skilled workers to repair the water pipe in time, so as not to cause more losses downstairs, we need to pay.

If there is no boiling water flow, the sewer pipe has been leaking, indicating that the sewer pipe must be leaking in a certain part, so be sure to check the leakage of the part, whether it is in your house or upstairs.

There is no faucet, but the sewer pipe keeps leaking, that is, it may be blocked in the middle, so the water from other pipes is gathered together and the water cannot flow, so this leakage phenomenon occurs.

There are three possibilities for the faucet to come out of the faucet:

1. It may be that the water inlet valve is closed, resulting in water not coming out. The solution is to fully open the valve of the water faucet's head.

2. The faucet has been used for a long time, and the internal filter has accumulated a lot of scale or stains. This requires removing the faucet, removing the filter, and cleaning. Wait until the cleaning is complete, and then install it back.

3. There is also a possibility that the water pipe is damaged, resulting in water leakage and water cannot come out. You need to find the leaking pipe, cut it off, and replace it with a new one.

Daily cleaning of faucets

1. In daily life, it is necessary to clean the faucet regularly to avoid limescale sticking on the surface of the faucet, which will affect the use. Generally speaking, the cleaning of the faucet is relatively simple, and you only need to use it to pour it easily.

2. There is a filter screen inside the faucet, which can prevent the passage of stains, and after a long time of use, it will accumulate more dust on the surface of the filter screen, resulting in blockage and affecting the normal flow of water. In this case, it is necessary to wipe it open and clean the filter.

3. The protection of the faucet is also not enviable, to avoid sharp items such as knives and steel wool balls, rubbing the surface of the faucet, it is very easy to produce scratches, affecting the overall quality, and the service life will be greatly reduced, which is not conducive to long-term use.

Summary. First check the reason why the faucet does not come out of the water, and then prescribe the right medicine according to the actual situation. If it is caused by a blockage at the nozzle, first remove the faucet, take out the nozzle inside, and then use a detergent to clean up the dirt on it, and then install it back.

If the water pressure is not enough, turn off the faucet for a while and then turn it on, or you can install a booster pump on the water pipe.

What should I do if the water is not stopped but the faucet does not release water?

First check the reason why the faucet does not come out of the water, and then prescribe the right medicine according to the actual situation. If it is caused by a blockage at the nozzle, first remove the faucet, take out the nozzle inside, and then use a detergent to clean up the dirt on it, and then install it back. If the water pressure is not enough, turn off the faucet for a while and then turn it on, or you can install a booster pump on the water pipe.

1. What to do if the faucet does not come out of the water 1. If the handle and valve core of the faucet fall off, it will cause the switch of the faucet to be unable to be controlled, so the faucet will naturally not be able to produce water, so just replace a new faucet or valve core. 2. If the angle valve of the faucet is closed, it will also cause the faucet to fail to produce water, so just open the angle valve of the faucet directly.

3. Foreign body blockage If the handle and valve core of the faucet have not fallen off, and the angle valve has not been closed, then it may be caused by the faucet being blocked. We should remove the isolation net at the faucet outlet hole for a detailed inspection to see if there are foreign objects in the isolation net, if there is, it will naturally lead to the faucet can not produce water, then just clean up the foreign objects in the isolation net. 4. Water outage The faucet does not come out of the water, and it may be caused by the water outage at home.

We can turn on the switch of the main valve of the water pipe to see if there is water flowing out, if not, then it means that the water is out of the house, then we need to consult the water supply company about the reason for the water outage and the time to restore the water supply. 5. The water pipe is blocked If you are sure that the water has not been stopped at home and the sluice gate has been opened, then it may be because the water pipe at home is blocked, resulting in the faucet not coming out. At this time, it is necessary to contact a professional maintenance person to help with the repair.

1. It may be that the pipe connecting the water pipe is blocked, so the water in the water tower cannot flow to the faucet.

2. Another reason is that there is no water pressure, because some people install water towers with relatively high positions, and when there is a certain height, it will produce relatively large water pressure, and there will be no water when the faucet is opened.

Solution: Call the maintenance personnel ** and carry out the maintenance.

Problems with the faucets of the water supply from the water tower.

If the handle of the faucet supplied by the water tower is damaged, you don't need to buy new parts, you can remove the handle screws and replace them with new ones. It should be noted that the screw part will generally be obscured by the trademark, so you can look carefully.

If the faucet is not tightly closed, it can be replaced. The faucet core firmware is not the same as the handle, and the core fixation is a one-time use. When buying a new faucet, you can prepare a roll of special sealing tape for water pipes, and you can wrap a few more loops of sealing bags to fix the angle of the faucet.

The root of our current household faucetThat's just three kinds of things, as shown below.

<> the above three are:Faucet spouts for washing machines, old-fashioned faucets, washbasin faucet bottoms

The first type is leaking, which leaks because it is not tightened

Especially the first and second faucets, which are very common problems

Workaround:Buy a roll of tarpaulin(Raw material belt, go to the hardware store to call this name), wrap the root of the faucet a few more times and then reinstall it, this waterproof tape is used to prevent water leakage and reinforcement.

The second type of water leakage,The skin ring of the inlet pipe is aging and causing water leakage

This is the problem of the inlet pipe of the washbasin faucet, and it has nothing to do with the other two.

Workaround:Replace it with a new inlet hose, the quality of a dozen dollars is very good. Very easy to disassemble, not much to say.

The third type of water leakage,The water inlet is damaged

As you can see in the picture above, there is a crack in the obvious water inlet and it is definitely going to leak.

Workaround:Replace the inlet with a new one。But we can't change this ourselves, we need to ask a professional plumber to help.

1. How to fix the faucet leakage - the faucet is still out of water after the valve core is closed.

In this case, it may be the reason for the loosening of the pressure cap or the deformation of the rubber ring at the bottom of the valve core, for the former it is recommended to remove the handle and decorative cover, and re-tighten the pressure cap, in the latter case, it is recommended to take out the valve core, check the condition of the rubber ring, and then reinstall it.

2. How to fix a leaky faucet - water seeps out around the valve core.

If this phenomenon is encountered, it is possible that the valve core is loose or deviated, and it is recommended to remove the valve core and reinstall it once.

3. How to fix the leakage of the faucet - water seeps out from the middle of the valve core.

If you encounter the above phenomenon, it means that the valve core is damaged, and it is recommended to replace the valve core.

4. How to fix a leaky faucet - leaking water at the bottom of the faucet.

This phenomenon may be caused by the inlet pipe o-ring is not properly installed or deformed, it is recommended to unscrew the hose to see if the o-ring is loose, if it is loose and re-installed. If you find that the o-ring is deformed, it is recommended to replace the o-ring.

There are several situations where water leaks under the sink:

1. If it is a water leakage caused by the aging of the sealing ring, you need to unscrew the nut and replace a new sealing ring. Then install the water pipes.

2. If it is caused by the rupture of the water pipe, close the water valve first and replace it with a new water pipe. If the damage is not severe, you can apply glue or wrap tape around the surface so that it does not leak.

3. If the waterproofing is not done well and causes water seepage, it is more troublesome to deal with, it is best to knock off and redo the waterproofing, if it is a water pipe problem, find the problem, and re-iron the damaged water pipe, which will also need to destroy part of the wall and floor tiles.

4. There is another possibility, you can see if there is a problem with the sewer pipe, if the sewer pipe is damaged, just replace the broken part, this is relatively simple.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

You can glue the gap with glass glue first, and then call a plumber to come and check it.

After the water stops, it will be nice to be able to release the water.

Summary. Hello, dear. Reasons why the faucet can't release water after the water is stopped:

1. The water pressure is too small, and the water inside cannot be lifted after the water is stopped. 2. The pressure relief valve fails and cannot be drained. 3. Limescale causes blockage and needs to be dredged.

4. The rubber pad inside the faucet is sticky.

The faucet does not release water after the water is stopped.

Hello, dear. Reasons why the faucet can't release water after the water is stopped: 1. The water pressure is too small, and the water inside can't come up after the water is stopped. 2. The pressure relief valve fails and cannot be drained. 3. Limescale causes blockage and needs to be dredged. 4. The rubber pad inside the faucet is sticky.

If you can't solve it on your own, you need to ask a professional to repair it. At the same time, the selection of faucets mainly pays attention to the quality of the valve core, like the ceramic valve core, which is durable, has good sealing, will not drip and has stable performance in all aspects. And poor quality faucets may cause heavy metal exceedance.

At the same time, you can put the faucet in your hand to observe it closely, and the surface of the faucet should be as bright as a mirror, without any oxidation spots and scorch marks.