What do I need to stamp stamped? What are the precautions for stamping the official seal

The official seal only needs to be stamped on the date of writing.

In the old days of China, the official document was written vertically, and the date of writing was written at the end of the document, and it was required to write a line straight at the top of the box.

After the founding of the People's Republic of China, in 1955, the seal of the state organ was changed to a circle, and in 1956, after the official document was written horizontally and horizontally, there was no such requirement for the use of the seal, and it only needed to be stamped on the date of writing, but it was still used this name.

When stamping, hold the seal in the palm of your hand, the end of the seal anti-counterfeiting code is close to the wrist (upright, not crooked), pay attention to the force evenly under the stamping document, and finally present the most perfect seal.

How to ride the stamp:

Stamped with the seal, the contract as a whole can be restored to the original seal, so it can prevent the other party from changing the content of the contract, prevent the other party from denying the content of the contract, and avoid unnecessary troubles, disputes and losses caused by changing the content of the contract or denying the content of the contract.

As the name suggests, the riding sewing chapter should be ridden sewing, and it should be ridden to hold all the seams, that is, each page of the contract should have a red seal after the riding sewing seal is stamped, and the first page and the last page should have words at the same time, not just a red circle (only the red circle is easy to fake), there should be no missing pages, whether it is a leak in the middle or a leak before and after.

The contract should be able to restore the riding seal to the original chapter, and only in this way can it be a more standardized riding chapter and play the role of the riding seal.

The above content refers to Encyclopedia - Qi Year Gaiyue.

The above content refers to the Encyclopedia - Riding Seam Chapter.

The official seal is usually stamped on the signature and date.

The precautions for stamping the official seal are as follows:

1. Stamping with the official seal is the confirmation of the content of the document by the representative unit and the opinion of the unit.

2. The use of the official seal of any unit must strictly abide by the leadership approval system.

3. The position of the official seal is generally in the middle of the time of the last page.

4. Stamping the document according to the number of copies issued, and not more at will.

5. If the official seal of the unit is damaged, lost or stolen due to poor management, it must be reported to the superior and relevant departments as soon as possible, and the procedures should be re-engraved as soon as possible, and the new seal should be engraved to avoid delaying normal work.

The official seal refers to the seal used by organs, groups, enterprises and institutions. Since the Ministry of Public Security does not have uniform regulations on the procedures for carving seals, the regulations on the procedures for engraving seals are different in different places. Depending on the type of seal to be engraved, the procedures are different.

Legal analysis: It depends on the actual situation. Sometimes signing or sealing is a choice relationship, which means that either the signature or seal, or the signature and seal are both, and these three situations have the same meaning for the formation of the contract.

Sometimes the requirement is a signature, which indicates that the signature and the seal are juxtaposed, and the agreement can only take effect if both the signature and the seal are present.

[Legal basis].Article 7 of the Law of the People's Republic of China on Negotiable Instruments stipulates that the signature on the bill shall be a signature, seal or signature with a seal.

The signature and seal of the legal person and other units using the bill shall be the seal of the legal person or the unit plus the signature of its legal representative or the person authorized by it. The signature on the instrument should be the real name of the party. According to the nature of the signature, it can be divided into the seal of the legal entity and the signature of the natural person.

Signature and seal of the legal entity: The general official document only affixes the legal person seal (official seal) to the name of the unit at the end of the official document; In addition to the name and official seal of the legal representative, some official documents involving the responsibility of the legal representative must also be signed by the legal representative and stamped with a private seal.

The signature of the person who is from Huaichong Tuanran, handwritten signature in the name column of the document and stamped with the personal seal of the party.

Is it necessary to sign and seal? It is indispensable to sign and seal.

Legal analysisLost time pay is determined based on the victim's lost time and income. 3. Nursing fee: The nursing fee is determined according to the income status of the nursing staff, the number of nursing personnel, and the nursing period.

4. Transportation expenses: Transportation expenses are calculated based on the actual expenses incurred by the victim and his or her necessary escorts for medical treatment or hospital transfer. 5. Hospitalization meal subsidy:

The hospital meal subsidy may be determined with reference to the business trip meal subsidy standard for general staff of local state organs. 6. Nutrition expenses: Nutrition expenses are determined according to the victim's disability with reference to the opinions of medical institutions.

7. Disability compensation: Disability compensation shall be calculated for 20 years from the date of determination of disability according to the degree of inability to work or the level of disability of the victim Lu Zhilao, and according to the per capita disposable income of urban residents or the per capita net income of rural residents in the previous year at the location of the court where the lawsuit is filed. However, if the age is over 60 years old, the age shall be reduced by one year for each additional year; Those over the age of 75 are counted as five years.

[Legal basis].Article 490 of the Civil Code of the People's Republic of China: Where the parties conclude a contract in the form of a written contract, the contract shall be concluded when both parties sign, affix their seals or press their fingerprints. The contract is formed when one of the parties has fulfilled its primary obligations and the other party has accepted it before signing, stamping or fingerprinting. When laws or administrative regulations stipulate or the parties agree that a contract shall be concluded in written form, and the parties do not use the written form but one party has performed its main obligations and the other party accepts it, the contract shall be established.

Law of the People's Republic of China on Negotiable Instruments Article 7 The signature on the negotiable instrument shall be a signature, seal or signature with a seal. The signature and seal of the legal person and other units using the bill on the bill shall be the seal of the legal person or the unit plus the signature of its legal representative or its authorized person. The signature on the bill shall be the real name of the party.

The method of stamping is correct, and the stamp is beautiful, so let's talk about the correct stamping method.

How it works:When stamping, prepare a flat ink pad, backing plate and stamp.

First put the stamp lightly on the printing pad, press down a few times, not too hard, otherwise the ink will run into the gap of the word.

Under the paper that needs to be stamped, put a rubber pad board, if not, you can put a flat book, and then pick up the stamp, firmly put it in the place that needs to be stamped, and drop it gently, to be successful at one time, do not hold it and shake it on the paper, so that the stamp will be broken.

Press and hold the top of the chapter with your hand, press down evenly and forcefully, and then quickly pick up the chapter, so that the finished chapter is neat and beautiful.

Where there is no text in the lower arc of the seal, the lower set is adopted, that is, the lower edge of the seal is used to ride the year and cover the month; If there is text in the lower arc of the seal, the middle sleeve type is adopted, that is, the center line of the seal is pressed on the date of writing.

The precautions for stamping are:

1. Before stamping, you should confirm that the stamped seal is correct.

2. When stamping, it is best to pad some newspapers, magazines, or books below to facilitate stamping.

3. If you use oil-based ink, you should pay attention to whether the inks are easy to spread, and it is best to try it in advance.

4. Pay attention to the direction of the text when stamping, and at the same time pay attention to the fact that the leader's signature cannot be covered when stamping.

5. After stamping, the seal should be clear and complete.

The labor contract signed by the employer and the employee is usually stamped with an official seal or a contract seal, and the labor contract with the official seal has the same legal effect as the contract seal. The labor contract shall come into force after being signed and signed by both parties through negotiation and sealing.

Labor Contract Law

Article 16 The labor contract shall be agreed upon by the employer and the worker through consultation, and shall be signed or sealed by the employer and the worker on the text of the labor contract.

The employer and the employee shall each hold one copy of the labor contract.

Article 17 The labor contract shall have the following clauses:

1) The name, address, and legal representative or principal responsible person of the employer;

2) The worker's name, address, and resident ID card or other valid identification number;

3) The term of the labor contract;

4) The content of the work and the place of work;

5) Working hours, rest and vacation;

6) Labor remuneration;

7) Social insurance;

8) Labor protection, working conditions and protection against occupational hazards;

9) Other matters that shall be included in the labor contract as stipulated by laws and regulations.

In addition to the necessary clauses stipulated in the preceding paragraph, the employer and the employee may agree on other matters such as probationary period, training, confidentiality, supplementary insurance and welfare benefits. There is a difference between a legal person's name seal and a signature seal. The main body of use of the legal person's name seal is the unit, including the company and other legal entities and unincorporated units, which are inseparable from the seal in foreign exchanges.

A signature seal is a personal seal.

1. A legal person is not a specific person, but a unit. Therefore, the corporate seal is actually the official seal of the unit. However, because it is customary for people to call the real legal person seal the official seal, and instead call the legal representative seal the legal person seal, it has been customary to a certain extent.

Therefore, the circular legal person seal of enterprises, institutions or organizations is referred to as the official seal, and the square legal representative chapter is referred to as the legal person seal, as long as the communication and communication parties understand that there is no problem.

2. The signature seal is generally used for personal signatures on corporate finance, housing sales, receiving items, banks and other occasions, with and without borders, usually with borders, fonts, and content can be customized according to their own needs. Fonts: Commonly used fonts are (simplified and traditional Songti, italics, lines, Lishu, seals, etc.).