How to repair the leakage of the solar tube, how to repair the leakage of the solar water pipe

1. Find a professional maintenance personnel to replace the solar collector tube. 2. To reinstall the pipe fittings of the solar water pipe, it is generally necessary to screw the small steel pipe out of place before it can be used. 3. To the leaking water tank mouth, you need to take out the inside of the silicone ring and slowly buckle the new silicone ring in the notch.

4. Find a professional maintenance personnel to replace the sensor of the solar tube. The reasons for this situation: 1. The leakage of the solar water tank is very troublesome, especially in winter, it is often seen that there is ice hanging in some pavilions, needless to say, it must be a solar leakage pool, and the leakage of the vacuum collector tube of the water heater is actually very common.

2. It may be because of the displacement of the small silica gel ring of the solar tube. 3. Leakage of this seal is also very common, especially for some long-term solar energy, of course, water heater inlet and outlet leakage is actually very common. 4. The sensor of the solar tube has been damaged, resulting in the inability of solar energy to sense the internal water level, resulting in water leakage of the solar tube.

Find out the cause and make repairs. 1. Find the cause. If there is a leakage phenomenon in the solar water pipe, we must first find the leakage point and the cause of the leakage in time before we can deal with it in the next step.

2. Repair water pipes. If the water pipe leaks due to a small crack in the middle, you can wrap the crack with a raw meal tape, and then pour the 502 glue on the ** circle until the glue dries.

3. Replace the water pipes. When the solar water pipe is used for too long and the water pipe is aging and leaking, the best way to deal with it is to replace the water pipe and install the newly purchased water pipe according to the installation method of the old water pipe.

Is it PVC or aluminum-plastic pipe? Explain the rupture or give a ** to see, and then help you.

Hello, let's talk about what material water pipes.

Leaking solar glass pipes can be temporarily repaired with tape.

The solar water heater that has been used for a long time will inevitably have the situation of aging and freezing of the upper and lower water pipes, like last year, there were two cold waves in the winter of Ningbo's Moxu Prefecture, and there were many solar water heaters that were frozen and damaged, and a worker had to replace nearly 100 meters of water and upper and lower water pipes every day. If you can't find a professional maintenance personnel temporarily, the customer can find the location of the water leak by himself, and first use electrical tape to wrap it repeatedly for a few times, which can be used as a temporary use.

Solar maintenance methods

1. The solar energy is not used for a long time or the first time due to the high intensity of sunshine radiation, so that the water in the solar vacuum collector tube produces a high temperature of about 300 degrees, and the pipe is blown up when the water is suddenly put on, so the solar water needs to be replenished before sunrise in the morning or 1 hour after sunset in the evening.

2. Always check whether the solar exhaust port is blocked, so as not to damage the water tank due to poor exhaust reputation.

3. When the temperature is lower than 0 in winter, the water in the exhaust pipe and the water inlet pipe is easy to freeze, if the solar water heater is used at this time, it will form a negative pressure in the insulation water tank, resulting in the deflating of the inner tank and damage the water heater, so in order to ensure the safety of the water heater, it is strictly forbidden to use the Dansha solar water heater when the exhaust pipe is blocked due to the temperature of 0 and below or other reasons.

4. When adjusting the bathing water temperature, according to the season, water temperature and bathing habits, first open the cold water switch of the mixing valve, and then slowly turn to the hot water switch, adjust the mixing valve until the water temperature is suitable for the bathing temperature, so as to prevent the hot water temperature from being too high and scalding**. Children and the elderly need to be accompanied when bathing to prevent burns.

5. When the mixing valve is not in use, the handle should be turned to the cold water end or the hot water end to prevent the cold and hot water from flowing through the mixing valve.

How to deal with solar water heater pipe leakage:

1.The connection between the water pipe and the joint, this depends on what kind of pipe is used, and the hot melt pipe is not good enough during hot melting, resulting in water leakage; In the case of aluminum-plastic pipes, the screws are not tightened or the sealing ring is damaged.

2.The joint between the joint and the water tank pipe is often caused by water leakage caused by the raw material belt not being wrapped properly.

3.There are two commonly used connection methods for the connection between the water tank pipe and the water tank: welded and silicone sealed.

If it is a welded type, then it is necessary to replace the water tank, if the warranty period has passed, you must find a master of argon arc welding, and get the insulation layer welded. If it is a silicone seal, just change the sealing ring. If you don't have a replacement in stock, you can replace the sealing ring of the exhaust port on the top for use.

Solar energy was first used in the hot water system, so the industrial chain of solar water heaters is more sophisticated, and there may be some questions in the process of use, and the maintenance personnel will also help you deal with it in time, and don't forget to maintain it in ordinary use.

Generally speaking, there is a special repair agent, and if the effect is not good, it can be replaced with a single root.

The method of repairing the leakage of the solar tube is as follows:

1. The first situation is that the solar water tank is damaged and causes water leakage, if it is a water tank leakage, it needs to be repaired in time, otherwise it needs to be replaced with a new one.

2. The second situation is the leakage of the solar water pipe, which is caused by the aging of the water pipe for a long time, and it can be replaced with a new one.

3. The third situation is that the sealing ring at the junction is aging and causes water leakage, which can be solved by replacing the pre-spike sealing ring at the joint.

4. The fourth situation is that the solar solenoid valve is faulty, and it can be solved by taking it out for maintenance or replacing it with a new one.

5. The fifth situation is that the solar sensor is broken, resulting in water leakage at the overflow pipe, exhaust pipe and plug, and the sensor can be replaced to solve the problem.

Causes of water leakage from solar tubes

1. If the vacuum tube is broken, the water will leak out;

2. The connection of the pipeline is loose, or the pipe fittings are aging, damaged and missing, such as the faucet is not tight, and the valve or metal hose and other parts are damaged, which will lead to water leakage;

3. The sealing gasket is damaged or loose, resulting in solar water leakage;

4. The water supply valve is faulty, resulting in no water supply, so there is water leakage.

If the water leaks, you can only replace a water pipe, and the broken things can not be repaired, even if it is repaired for a long time, it will still leak.

If a solar water pipe is leaking where the water valve or water pipe is connected, it is likely that the water pipe is loose. In this case, it is advisable to wrap the strip of raw materials layer by layer along the leak and stick them together at the end. If the solar leak is due to aging pipes and damaged joints, this situation does not need to be repaired.

Just buy the same model of water pipe and reinstall it.

When buying solar water pipes on a daily basis, try to choose high-quality water pipes, and hire special installers during the installation process to have a better service life.

Problems that should be paid attention to in the use of solar energy.

1.The water stored by solar energy should be discharged regularly so that the water does not pollute health. Depending on the local water quality, it is recommended to discharge it in the morning, when the temperature of the collector is lower.

2.If it is a sunny day and you do not use hot water for many days in a row, you should pay special attention because the water temperature is high at this time. You should boil cold water before use and then hot water to prevent burns on yourself.

3.Since solar pipes are prone to freezing in winter, there is no need to worry if the pipes do not crack at this time. It can be used when the temperature rises.

4.If the temperature is too low, the solar pipes have frozen. Do not knock on the pipe at this time, or the pipe will burst. At this time, it is recommended to wrap the tube in a towel and then treat the tube with warm water.

5.In order to prevent limescale from appearing inside the vacuum tube of the solar water heater, it needs to be cleaned regularly. It is recommended to do this for 2-3 years.

6.Solar energy equipped with special instruments should pay special attention to electricity and lightning protection. When used during the thunderstorm season, the electric plug should be unplugged first.

The solar pipe leak repair is as follows. Vacuum collector tube leakage This is the most common fault in life, when the vacuum collector tube is damaged, there will be water leakage and other phenomena, at this time it is best to ask a professional to replace the new collector tube. If you want to replace it yourself, be sure to soak the vacuum nozzle in the lubricating fluid, and then slowly rotate it to install it.

Seal leakage If the seal is leaking, you should first find the leaking water tank mouth, and then take out the silicone ring for internal testing, and then install the new silicone in the notch, pay attention to the large mouth of the silicone ring facing outward, otherwise there will be leakage and other problems.

If the upper and lower nozzles of the water heater leak if it is a fault, you need to check whether the water pipe is damaged, and install the water pipe fittings, pay attention to the small silicone ring in the pipe to be as careful as possible, it is best to carry out under the guidance of professionals, so as not to cause a bigger failure and affect the service life of the water heater.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.