What should I do if the seal is blurry?

First of all, you want to make sure.

Seal. Clearly engraved - the chapter surface is smooth and flat, and the unwanted parts should be eliminated. If not, the cover will definitely be blurred. Secondly, probably.

Indonesian. Don't choose foam ink, don't choose a stamp pad, but choose a clay-like solid ink. Also, it could be.

Paper. Some paper writing is easy to make.

Ink. Divergent.

Raw flowers. The stamp is also easy to blur. Finally, it is necessary to pay attention to the flat paper of about half a centimeter under the paper when stamping.

Strive for a force.

Press. Do not shake.

When the hard seal material is used, it is not easy to stamp clearly, which has a lot to do with the material, and then you have to use soft paper, that is, rice paper is the best, and the ink is printed with the pearl sand printing mud from the West Cold Printing Society, and finally the most important link, you have to gently dip a few more times in the printing oil, do not force, otherwise not only can not cover clearly but also paste the seal.

When covering, you have to use force, which is the term often said by old seal artists: light cover and hit hard.

How to deal with unclear seals: 1. Clean the impurities of the seal text; 2. Turn the seal upside down, drop the special ink on the literal, invert it for more than ten minutes, and wipe the surface with a paper towel when the ink penetrates; 3. The machine-pressed atomic seal is a one-time seal and cannot be used for repeated oil injection; 4. The machine-carved permeable printing can be refueled with permeation printing oil or atomic printing oil, and the photosensitive printing seal must be refueled with a special photosensitive printing oil; 5. After maintenance, if the seal is still unclear, you should apply for a new seal. Hope!

Use ps to do it, filter Blur Gaussian Blur, select 1 2, then splash, select the particles, preview. If you want to re-image the dots, just select the magic wand or channel inversion, filter Clouds (red and white), fill, and finally save.

Electronic seal technology simulates the traditional physical seal with advanced digital technology, and its management and use are in line with the habits and experience of the physical seal, and the stamped electronic document has the same appearance, the same validity and similar use method as the paper document stamped with the physical seal.

In the mid-to-late 90s of the last century, with the gradual transformation of the traditional office model to the information office model, the circulation form of paper documents also changed to the circulation form of electronic documents; In order to ensure the validity of electronic documents, and also make electronic documents have the same credibility visual effect as traditional paper documents, the concept of electronic seals is proposed.

Before the implementation of the Electronic Signature Law on April 1, 2005, electronic seals have not been widely recognized and applied, so there are not many companies engaged in the research of electronic seals in China. After the promulgation and implementation of the "Electronic Signature Law", the research and application of electronic seal technology and its products have developed rapidly.

Hello, I don't know what material you use for the seal. The following gives you different suggestions for different materials.

Horn seal: This kind of seal is generally more wear-resistant, if you use it for a long time, the imprint is not clear, you can use an old toothbrush to dip some laundry detergent, a small amount of water to gently clean the debris and mud on the printing surface.

Rubber seal, the general rubber seal wear resistance is a little poor, first use an old toothbrush to dip some washing powder, a small amount of water to gently clean the debris and ink on the printing surface.

If the clarity is not very good, use a piece of 400-1200 mesh fine sandpaper, put the seal on the fine sandpaper, and gently grind it, and the strength should be controlled very small, so as not to wear out the print. This jujube carrying method is to solve the problem of the printing surface being oiled in contact with the ink for a long time.

Atomic seal: If the atomic seal is not dusty, you can use a wide transparent tape stool to bend and gently stick it on the surface of the seal, and then press it gently, and then slowly remove the tape little by little, and then add the special oil for this seal.

When the ink is not clear, the same brand of ink ink ink, if it is not good, it is necessary to replace the special ink pad for the ink seal.

What to do if the seal is not clear:

1. Clean the impurities of the seal text;

2. Turn the seal upside down, drop the special ink on the literal, invert it for more than ten minutes, and wipe the surface with a paper towel when the ink penetrates;

3. The machine-pressed atomic seal is a one-time seal and cannot be used for repeated oil injection;

5. After maintenance, if the seal is still unclear, you should apply for a new seal.

In addition, it should be noted that the management of the use of seals is very strict, and the state administrative organs, enterprises, institutions, and social organizations must establish and improve the seal management system, strengthen the management of seals, and strictly examine and approve procedures. Without the approval of the leader of the unit, the seal of the unit shall not be used without authorization.

Provisions on the Seals of State Administrative Organs, Enterprises and Public Institutions》 Article 25 State administrative organs, enterprises, public institutions, and social organizations must establish and improve the seal management system, strengthen the management of the use of seals, and strictly examine and approve procedures. Without the approval of the leader of the unit, the seal of the unit shall not be used without authorization.

Legal analysis: clean up the seal, hand bridge quietly printing mud, foam seal printing countertop has ink, ink oil is an oily thing, not integrated with water, it will only get clearer and worse, you can also use things to buckle, but things can not be too sharp, pins are easy to buckle small characters, use toothpicks to wrap paper towels to clean up a little bit, to clean up carefully. If the stamp is too blocked, it is recommended to clean the stamp with high-concentration anti-disturbing alcohol, then wipe it with a flannel cloth, and then clean it with a toothpick.

Legal basis: Provisions on the seals of state administrative organs and enterprises and institutions》 Article 25 State administrative organs, enterprises, public institutions, and social organizations must establish and improve the seal management system, strengthen the management of seals, and strictly examine and approve procedures. Without the approval of the leaders of the unit, the seal of the unit shall not be used without authorization.

Legal analysis: The unclear seal and whether it has legal effect depends on whether it can be compared with the original seal and appraised. If the official seal on the contract is not clear, you can affix a clear seal next to it, so that the contract is legally valid.

Legal basis: Civil Code of the People's Republic of China Article 502 A contract established in accordance with law shall take effect upon its establishment, unless otherwise provided by law or otherwise agreed by the parties. In accordance with the provisions of laws and administrative regulations, if the contract shall go through formalities such as approval, the provisions shall be followed.

If the failure to go through formalities such as approval affects the effectiveness of the contract, it does not affect the validity of the provisions of the contract on the performance of obligations such as reporting for approval and the validity of the relevant clauses. If the party who should go through the formalities such as applying for approval fails to perform its obligations, the other party may request that it bear the responsibility for violating the obligation and delaying the demolition. Where, in accordance with the provisions of laws and administrative regulations, the modification, transfer, or termination of a contract shall go through formalities such as approval, the provisions of the preceding paragraph shall apply.

Summary. Dear, I'm glad to serve you, if you can't read the words on the seal, you can try the following methods:1

Get outside help: You can ask someone who can read the text, such as a friend, co-worker, family member, etc. 2.

Consult a professional organization: If these words are related to law, notarization, certification, etc., you can consult a relevant professional organization or consult a lawyer, who can provide you with professional answers and help. 4.

Check the relevant information: If you know the organization or organization to which the words on these seals belong, you can check the relevant information or official website to understand the meaning. No matter which method is used, we should be as cautious as possible about seals involving personal rights and interests or important matters, and keep relevant evidence and backups to ensure that our legitimate rights and interests are not infringed.

Dear, I'm glad to serve you, if you can't read the words on the seal, you can try the following methods:1Get outside help:

You can ask for help from someone who can read these words, such as friends, colleagues, family members, etc. 2.Use the translation tool:

If these words are related to law, notarization, certification, etc., you can consult relevant professional institutions or consult a lawyer, who can provide you with professional answers and assistance. 4.Consult the relevant information:

If you know the unit or group to which the words on these seals belong, you can consult the relevant information or official website to understand their meaning. No matter which method is used, we should be as cautious as possible about the seals involving personal rights and interests or important matters, and keep relevant evidence and backups to ensure that our rights and interests are not infringed.