Is there a trick for bank stamping? Are there any tips for stamping

The bank seal refers to the financial seal of the legal person The seal should be clear, and it should be covered at one time, and you can put a napkin under the check Do not open the napkin. You can give it a try, it's very useful.

Many cashiers will often come into contact with the seal of the unit, and the cashier and accountant will also contact the seal letter and license of some enterprises, including the seal letter. It can be seen that the cashier always stamps the special seal for finance, and often has to stamp the seal in the work, such as the official seal of the enterprise, the special seal for invoices, the special seal for cash, the transfer, and so on. In fact, we have all been to the bank, and when the bank clerk stamped it, I don't know if you found it, and there is a piece of rubber underneath.

Because the seal is quantitative and elastic.

We don't need a whole piece of rubber on our desk, just use our mouse pad to pad under the seal, and press the seal in a circle when printing. It's not very clear.

Nowadays, many of the bank identification seals are computer recognition, if you feel badly printed, it is best to bring the seal with you and go to the bank to stamp it. Of course, the system of many enterprises does not allow the seal to be carried on the body, so we need to distinguish whether the seal is clear.

1) Carefully check whether the stamp border is clear and make sure there are no notches.

2) Observe whether the text in the seal is clear, and there can be no blurring, ghosting and other phenomena.

3) The color of the seal is bright, if the color is lighter, please re-stamp it.

Only the correct way to stamp can make the seal beautiful, and the steps for the correct seal are as follows:

1.When stamping, prepare a stamp pad with ink, something that can be used as a backing plate, and a good stamp.

2.First, gently place the stamp on the stamp pad and press it down a few times, not too hard.

3.Put the paper that needs to be stamped flat on the pad, then pick up the stamp, put it firmly in the place where it needs to be stamped, and drop it gently, don't hold it and shake it on the paper, so that the stamp will be broken.

4.Press and hold the circle at the top of the chapter with your hand, press down evenly and firmly, and then quickly pick up the chapter.

Summary. <>

Hello dear! No. The use of the official seal of any unit must strictly abide by the leadership approval system.

That is, each use of the official seal of the unit must be approved by the legal representative of the unit, and if the legal representative of the unit is out or cannot be approved for use due to other important tasks, it must also be approved by the legal representative of the unit to authorize the deputy and other appropriate personnel to approve the use. Specific management personnel shall not use the official seal of the unit to handle anything without authorization.

Can the official seal of the bank be stamped casually?

Hello dear! No. The use of the official seal of any unit must strictly abide by the leadership approval system.

That is, each use of the official seal of the unit must be approved by the legal representative of the unit, if the legal representative of the unit is out or cannot be approved for use due to other important tasks, it must also be authorized by the representative of the unit to authorize the deputy level and other appropriate personnel to approve the use of Sanzhou. Specific management personnel shall not use the official seal of the unit to handle or dig anything without authorization.

Hello pro-Lunai! The following is the relevant basis I found for you: Article 25 of the Provisions on the Management of the Seals of State Administrative Organs and Enterprises and Social Organizations, State administrative organs, enterprises, public institutions, and social organizations must establish and improve the seal management system, strengthen the management of seals, and strictly examine and approve procedures.

Without the approval of the leader of the unit, the seal of the unit shall not be used without authorization. Article 26 Those who forge seals or use forged seals shall be investigated and dealt with in accordance with the relevant laws and regulations of the State. If a forged seal is found or a forged seal is used, it should be reported to the public security organ or the unit with the name of the seal in a timely manner.

The Ministry of Public Security in conjunction with relevant departments shall formulate specific measures for the management of public security with seals.

Hello dear! What's the problem here?

The analysis is as follows: the precautions for stamping are:

1. Before stamping, you should confirm that the stamped seal is correct.

2. When stamping, it is best to pad some newspapers, magazines, or books below to facilitate stamping.

3. If you use oil-based ink, you should pay attention to whether the inks are easy to spread, and it is best to try it in advance.

4. Pay attention to the direction of the text when stamping, and at the same time pay attention to the fact that the leader's signature cannot be covered when stamping.

5. After stamping, the seal should be clear and complete.

Step Method A piece of flat thin cardboard or a hard rubber block should be padded under the paper. The thickness and hardness of the cushion should be based on the flatness of the printing surface. If the printing surface is spherical or curved, the cushion should be slightly thicker and softer.

On the contrary, if the printing surface is flat, it can be directly placed on the glass table plate for stamping. In short, efforts must be made to make the printed text clearly represented on paper.

Dip in mud. The extent of dipping the mud on the chapter.

It is best to dip the surface of the chapter in mud and evenly all over it.

1) Depending on the tightness, sparseness, softness and hardness of the structure of the chapter.

When the hard chapter is dipped in mud, it should be slightly heavier, dipped several times, and the paper should be light and slow when falling to prevent hard pressing.

2) Treat paper.

Calligraphy and painting paper, slightly hairy, coarse, or even last, has a large amount of printing clay, so it is necessary to use a more moist printing clay. The sizing is slightly thicker, and the printing time should be light, slow, and longer.

Even the book paper is slightly fine, smooth, the paper is thinner, and the amount of printing clay is less, so it is necessary to use dry printing clay. The sizing should not be too thick, the printing should be light, slow, and the time should not be long.

The seal should be upright and upright, and the seal can be borrowed. It is not advisable to shake and move the stamp.

If the density of the paper is too tight and the penetration of the oil is poor, the force should not be too large, the time should be appropriately extended, and the color paste will slowly penetrate the paper. In short, if the effect of the printing can be achieved to the white text red block evenly without revealing the white spots, the fine Zhu text lines are continuous; Zhu and Baiwen are not deformed, and can truly reflect the author's ideas, knife skills, and the printed text is clear and spiritual, so the effect is the best state.

Additional Notes:

1) If the paper area is not large, and the red background area of the printed text is large (such as fine white text), you can turn the paper over after the printing and gently grind it with your fingernails until the paste color penetrates the paper.

2) After the stamp is used, wipe it clean with soft paper or cloth, so as not to affect the color and quality of the ink and text. If the dirt has accumulated for a long time, you can use a small brush and soapy water to gently scrub.