How to deal with the leakage of solar pipes, how to repair the leakage of solar water pipes

If a solar water pipe is leaking where the water valve or water pipe is connected, it is likely that the water pipe is loose. In this case, it is advisable to wrap the strip of raw materials layer by layer along the leak and stick them together at the end. If the solar leak is due to aging pipes and damaged joints, this situation does not need to be repaired.

Just buy the same model of water pipe and reinstall it.

When buying solar water pipes on a daily basis, try to choose high-quality water pipes, and hire special installers during the installation process to have a better service life.

Problems that should be paid attention to in the use of solar energy.

1.The water stored by solar energy should be discharged regularly so that the water does not pollute health. Depending on the local water quality, it is recommended to discharge it in the morning, when the temperature of the collector is lower.

2.If it is a sunny day and you do not use hot water for many days in a row, you should pay special attention because the water temperature is high at this time. You should boil cold water before use and then hot water to prevent burns on yourself.

3.Since solar pipes are prone to freezing in winter, there is no need to worry if the pipes do not crack at this time. It can be used when the temperature rises.

4.If the temperature is too low, the solar pipes have frozen. Do not knock on the pipe at this time, or the pipe will burst. At this time, it is recommended to wrap the tube in a towel and then treat the tube with warm water.

5.In order to prevent limescale from appearing inside the vacuum tube of the solar water heater, it needs to be cleaned regularly. It is recommended to do this for 2-3 years.

6.Solar energy equipped with special instruments should pay special attention to electricity and lightning protection. When used during the thunderstorm season, the electric plug should be unplugged first.

There are many reasons why solar pipes leak.

If it's a leaking pipe, then you should replace it.

If there is a leak at the valve, then the valve should be replaced.

If it's a leak in the solar tube, that's the kind of glass tube leaking, then the glass tube needs to be replaced.

If it's rubber, the place is leaking, and you have to replace it with a new rubber pad, because it looks like it's a little old.

And so on for these reasons!

Is it PVC or aluminum-plastic pipe? Explain the rupture or give a ** to see, and then help you.

Hello, let's talk about what material water pipes.

The pipes can only be replaced. Because the temperature of the water inside varies greatly. So don't compromise so that the damage doesn't spread.

Summary. Hello Kiss is honored to answer for you: the place of damage and how to deal with it:

1. The seal is broken. Solution: Replace the sealing ring; 2.

The water supply switch is not turned off. Solution: Turn off the water supply switch; 3.

The vacuum heat collector tube is broken. Solution: Ask a professional to replace the vacuum tube; 4.

The connector is loose. Solution: Reinstall or replace the joint; 5.

The temperature of the cover is too high. Solution: (1) The system has poor circulation and gas blockage.

In order to solve the problem, the installation position of the water pipe must be adjusted to an upward angle in order to solve the problem; (2) The inlet and outlet water pipes of the collector are improperly connected, resulting in a short circuit of current. It needs to be reinstalled, and the collector inlet and outlet pipes should be two diagonal, which is the standard installation method;

Hello, kiss is honored to answer for you: damaged places and treatment methods: 1 seal breakage.

Solution: Replace the seal ring of the secret line; 2.The water supply switch is not turned off.

Solution: Turn off the water supply switch; 3.The vacuum heat collector tube is broken.

The method of dealing with high dry filial piety: ask professionals to replace the vacuum tube; 4.The connector is loose.

Solution: Reinstall or replace the joint; 5.The temperature of the cover is too high.

Solution: (1) The system has poor circulation and gas blockage. In order to solve the problem, the installation position of the water pipe must be adjusted to an upward angle in order to solve the problem; (2) The inlet and outlet water pipes of the collector are improperly connected, resulting in a short circuit of current.

It needs to be reinstalled, and the collector inlet and outlet pipes should be two diagonal, which is the standard installation method;

Related information: Problems that should be paid attention to when using solar water heaters 1. When using solar water heaters, pay attention to the timing of adding water. When the weather is very hot or the temperature is very high, do not add water immediately after using it, otherwise it is easy to cause the water pipe to burst.

It is best to add water to the Taiji Huifeng Yang Energy Heating World Water Stove in the morning before the sun rises or in the evening to ensure its longevity. 2. Regularly inspect the water pipes of the water heater. Check the exhaust port regularly to ensure that there is no water leakage and will not cause the tank to expand; Solar water heaters with auxiliary electric heating equipment should pay special attention to water supply to avoid dry boiling due to lack of water.

The water leakage treatment method of solar pipe is as follows:

If the location of the solar water pipe leakage is in the area where the water valve or water pipe is connected, it is likely to be caused by the loosening of the water pipe, in this case, it is recommended to use raw material tape to wrap along the leaking area layer by layer, and finally glue it together. If the solar water leakage is caused by the aging of the pipe and the damage of the joint, this situation does not need to be repaired, just buy the same type of water pipe and reinstall it.

When buying solar water pipes every day, try to choose high-quality water pipes, and ask special installers during the installation process to have a better service life.

Precautions for the use of solar energy.

1. The stored water in the solar energy should be discharged regularly to avoid water accumulation and polluting health. Depending on the local water quality conditions, it is recommended to discharge in the morning, when the collector temperature is lower.

2. If it is sunny for many days and no hot water is used, special attention should be paid to it, because the water temperature is high at this time, and you should first boil cold water before use, and then turn on hot water to prevent burning.

3. Since the solar pipe is easy to be frozen in winter, if the pipe does not crack at this time, there is no need to worry, and it can be used after the temperature rises.