How to tear off the broken nano membrane of the mobile phone, and how to remove the nano membrane of

The nano coating is first sanded, then polished, then treated with toothpaste, and finally rinsed off.

Here's how:

1. Polished off with sandpaper first, then rough polishing, then medium polishing, and varnishing and restoration.

2. Apply the toothpaste on a small handkerchief or small towel, and evenly apply it to the mobile phone film or mobile phone case, the mobile phone case is the most effective soft.

3. Don't apply too much, just cover the scratches on the phone film or phone case.

4. After 1 2 minutes, wipe it clean with a towel or handkerchief dipped in water, and leave it overnight, and the liquid film of these mobile phones can be removed.

Extended Information: Types of Nanocoatings.

1. Nano silicone oil.

It is an oil that feels a little sticky to the touch, and this oil can reach the nano level, but the oil is always an oil. Generally speaking, after making a mobile phone screen with nano silicone oil, it can have a good hydrophobic effect without getting wet.

2. (milky white liquid) is also called automobile crystal plating.

It belongs to the category of industry, not nanotechnology.

products. It can sit on the glass surface and lacquered surface of the car, which has the effect of brightening and brightening, and it is also good to sit on the phone.

3. Anti-fingerprint coating.

To do it on the mobile phone screen, it must go through the link of high temperature burning. If it is said that it does not go through the high-temperature burning step, this anti-fingerprint coating cannot be done, and it is difficult to achieve good adhesion.

Extended Information: Types of Nanocoatings.

1. Nano silicone oil.

It is an oil that feels a little sticky to the touch, and this oil can reach the nano level, but the oil is always an oil. Generally speaking, after making a mobile phone screen with nano silicone oil, it can have a good hydrophobic effect without getting wet.

2. (milky white liquid) is also called automobile crystal plating.

It belongs to the category of industry, not a product of nanotechnology. It can be made on the glass surface and paint surface of the car, which has the effect of adding light and brightness, and it is also good to sit on the mobile phone.

3. Anti-fingerprint coating.

To do it on the mobile phone screen, it must go through the link of high temperature burning. If it is said that it does not go through the high-temperature burning step, this anti-fingerprint coating cannot be done, and it is difficult to achieve good adhesion.

How to tear off the nano membrane when it is broken, the nano membrane of the mobile phone, so that the removal is simple and effective.

The nano coating of the mobile phone can be removed by the liquid release agent, and the specific steps are as follows:

1. First destroy and polish with sandpaper, then rough polishing, and then moderate polishing.

2. Then apply the liquid release agent evenly on the mobile phone film, be careful not to apply too much, enough to cover the mobile phone film completely.

3. Finally, wipe it clean with a towel or handkerchief dipped in water and leave it overnight.

4. In this way, the nanofilm of the key coarse mobile phone can be removed.

Notes:Nano mobile phone coating or liquid mobile phone film does have a certain effect, can play a part of the anti-scratch and life waterproof role, but there is no anti-drop and waterproof effect as advertised, if you want the mobile phone to prevent falling, you can use the mobile phone protective cover to reduce the damage to the mobile phone by falling and collision, the screen can be pasted with a tempered film, reduce the risk of collision on the screen glass breakage, and try to avoid contact with liquid in daily use.

Summary. The method of tearing off the broken nano membrane is as follows: 1. Clean the dirt on the mobile phone screen with an alcohol cotton pad, the cleaner the better.

The method of tearing off the broken nano membrane is as follows: 1. Clean the dirt on the mobile phone screen with an alcohol cotton pad, the cleaner the better.

2. Put on disposable gloves and take out the dust-free cotton pads stained with the No. 2 nano protective bag of the membrane knot in the package.

3. Quickly apply evenly on the mobile phone screen with clear fiber from top to bottom, and let the protective liquid cover the entire surface of the mobile phone screen until the protective liquid in the dust-free cotton sheet is wiped dry. After wiping dry, wipe on the screen for another 20 seconds or so.

Siqing Cave, smeared to complete, put into the disinfection and curing machine to cure for 3 5 minutes, there is no disinfection and curing machine can stand for 5 minutes, and if there is a condition, you can use a hair dryer to sweep a spike under the hot air The effect is better.

5. Wipe the mobile phone screen with a special polishing cloth and complete the protection.

This is not something that can be removed casually, it needs to be dissolved with a release agent, and there is generally this kind of thing in factories, which is specially used to clean the residual film layer and oil stains of lenses

The nano liquid film has a larger surface area and stronger adhesion ability, and the effect can be maintained for more than 1 year, and at the same time, it is not easy to fall off because it does not oxidize.

The particle properties contained in the nano liquid film are very stable, and they will not decompose at a high temperature of minus 7 degrees Celsius and minus 150 degrees Celsius, and still maintain their inherent properties, which can effectively protect the mobile phone from damage, greatly improve the strength, enhance the scratch resistance, and protect the paint in all directions. It will not decompose in a harsh environment, nor will it react with other chemicals, nor will it produce any new substances, so it will not cause any harm to the paint itself, because the nano liquid film itself is a good super-hard high-temperature resistant material and flame retardant material.

Summary. Hello dear, it's a pleasure to serve you. The nano membrane of the mobile phone was broken and torn off 1

This so-called mobile phone nano film is actually coated with a layer of glue. Some of this layer of glue is very difficult to handle, and some are very simple to handle. Here's how to deal with it in detail.

Hello dear, it's a pleasure to serve you. The nano membrane of the mobile phone was broken and torn off 1This so-called mobile phone nano membrane is coated with a layer of glue on its wild posture.

Some of this layer of glue is very difficult to handle, and some are very simple to handle. Here's how to deal with it in detail.

2.Heat treatment. You can use a blow-dryer to heat the screen of an electric appliance such as a handicap. Up to the phone screen, it is very hot to the touch. At this time, slowly pick up the scum and clear the demon, you can use a little more force.

If the nanofilm is broken, will the inner screen also be broken?

Is your inner screen in good condition now? If your inner screen is now intact and the nano membrane is broken, it will not affect the inner screen.

The inner screen of the mobile phone, and the outer screen of the outside. This outer screen glass is very thick. It can protect the inner screen of the phone.

I can't see if the bottle is good or not.

As long as there is an abnormality in the display of the inner screen, such as leakage or oxidation. Or the touch is abnormal. This means that there is a problem with the inner screen.

Now it is recommended that you first remove the so-called nanofilm from the outside. Heat it up with a hair dryer dryer. Heat until your hands are hot.

If you do, you still can't take it off. In this case, it is necessary to make the macro use diamond wire. Strain it with diamond wire. Diamond wire is relatively thin and dangerous, so it is recommended to send it to a mobile phone repair shop to have a professional master to change it.

Good. How do you get the nano film off?

Heat it up with a hair dryer dryer. When the heating temperature is hot, you can manually remove the nanofilm.

Hair dryers didn't either.

You can bake it over fire without a hair dryer. <>

But be careful when grilling. The temperature must be well controlled, just light and hot.

Neither did the fire. In this case, you can only take your phone to a mobile phone repair shop. Let the master use the heating table to deal with it for you first.

Attach the tape to the phone screen, press it tightly, and tear it off along one corner.

Tool Material: Adhesive tape.

1. First of all, attach the tape to the phone screen.

2. Then press the tape tightly.

3. After that, set off a corner.

4. Then along the side of the phone, lift it up.

5. Finally, the mobile phone film was successfully torn off.

Notes:After the tape is attached to the phone screen, be sure to press it tightly before it can be completely removed.

Nano mobile phone coating or liquid mobile phone film does have a certain effect, but there is no publicity to prevent liquid entry or prevent scratches after the mobile phone collision, many people want to remove the nano film on the mobile phone, so how to remove it? 1 First sanded with sandpaper, then coarse polishing, then medium polishing.

2. Then apply the liquid release agent evenly on the mobile phone film, be careful not to apply too much, enough to cover the mobile phone film completely. 

3Finally, wipe it with a towel or handkerchief dipped in water and leave it overnight, so that the nano membrane of the mobile phone can be removed.

1.Soak it in alcohol.

2.Insert a thin card through the gap.

3.Insert 4 corners in this way.

4.Lift it slowly little by little.

5.Be mindful of your movements.