What is the quota of the factory induction lamp cover, and whether the induction lamp belongs to the

Induction lamps belong to a new type of lamp.

It is possible to set the factory lamp quota.

The light source** can be replaced with: induction lamp.

This seems to be very professional.

I know a company that makes factory induction lamps.

Anhui Shenglong Electric, Hefei local, you call ** ask, they are very professional in the production of this, it is estimated that they can help you!

The induction lamp products produced by Fujian Yuanguang have been tested in practical application for more than 6 years in large-scale lighting projects, and have verified that they have the advantages of high light efficiency, low light attenuation, high reliability and maintenance-free (such as the induction lamp used on the Beijing-Fuzhou Expressway for 6 years, and the induction lamp in the waiting room of Fuzhou departure station has also been used for more than 6 years, and the current use is still good).

Most of the induction lamps produced by other companies are used within three years, and the damage rate is also very high. The key to this is that their electronic ballasts are not installed with the lamps, and they generally install the electronic parts directly in the electrical box of the lamps. Due to poor heat dissipation conditions, it directly affects the life of electronic components.

Our company is the only company at home and abroad that integrates the design of electrical boxes and electronic ballasts, which can greatly improve the service life of products.

Yuanguang's induction lamp products have been applied in key lighting projects in various fields at home and abroad, and have a wealth of successful application cases of key projects and a very good reputation. Such as the water cube, the street lighting around the bird's nest; The induction lamp lighting of the river crossing tunnel and the Bund tunnel built to meet the Shanghai World Expo are all designated Fujian Yuanguang brands; Yutong Bus, Shanghai Volkswagen, Shanghai General Motors, Zhengzhou Nissan, Nanjing Iveco and other automotive industries; As well as Guizhou Tobacco Factory, Yunnan Hongtashan, Qingdao Tobacco Factory, Jiangsu Yijiaomei and other tobacco industries have also directly designated the use of induction lamps produced by our company. In addition, the source light induction lamp is also used in Zhangcheng Expressway Tunnel, Fuzhou Gushan, Mawei Tunnel, Fuyin Expressway Tunnel, Fujian Longchang Expressway Tunnel, Fujian Quansan Expressway Tunnel, Fujian Punan Expressway Tunnel, Yunnan Yunling Expressway Shanwangmiao, Yangwu Tunnel, Yunnan Luofu Expressway Mechanical and Electrical Engineering Tunnel, Shandong Jilai Expressway Tunnel, Yunnan Pingsuo Expressway Tunnel, Provincial Highway Shima Cape Tunnel Reconstruction Project, Guangdong Shenshan Expressway Tunnel Reconstruction Project, Fuquan Expressway Leidashi Tunnel Reconstruction Project, Fuquan Expressway Feiluanling Tunnel Reconstruction Project, Shanxi Jinhou Expressway, etc.

Induction lamps have the types of bent jujube reed mining lamps, but rock sells and flood lights, etc., factory lamps have metal halide lamps, sodium lamps, induction lamps, LED energy-saving lamps, etc.

The induction lamp, also known as the electromagnetic coupling discharge lamp, uses a high-frequency magnetic field to excite the phosphor discharge, and there is no filament in the lamp, so the life is very long, up to more than 60,000 hours.

It has many advantages, energy saving, no flicker, anti-ballast, environmental protection, high light efficiency, long life and so on.

Street lights, tunnels, places that don't need to be taken care of for a long time.

The induction lamp is a patent made by using the name of Wuji County, and in general, the landscape lamp and many lamp types are called induction lamps.

Electromagnetic induction lamp, referred to as induction lamp. There are no filaments or electrodes inside the lamp, and it consists of a rectifier, a hollow discharge bulb, and a coupler. It is coupled to the lamp by the electromagnetic field of the high-frequency generator in an inductive way, so that the gas in the bulb is ionized by an avalanche to form a plasma, and the ultraviolet rays radiated by the plasma excited atoms return to the ground state, and the ultraviolet excitation of the phosphor on the inner wall of the bulb produces visible light.

The longest life of electromagnetic induction lamp is as high as more than 10 years, generally up to 6-8 years, so it has become the preferred lighting product for factories, institutions, schools, squares, venues, stations, docks, airports, highways, tunnels, municipal roads, etc., especially suitable for use in places with high requirements for lighting reliability, long-term lighting and difficult maintenance and replacement of lamps or high cost of replacing light sources.

Ultra-long life. Because there is no filament and no electrode in the bulb, it works in a high-frequency electromagnetic coupling mode, and the service life can be as long as 60,000 hours. Its life span is 10 times longer than that of fluorescent lamps and more than 12 times that of metal halide lamps and high-pressure sodium lamps.

Energy-efficient. Luminous efficiency 65-110lm w, power factor, the brightness of 125W electromagnetic induction lamp is equivalent to 400W incandescent lamp, 80 energy saving than incandescent lamp, 50 energy saving than high-pressure sodium lamp.

Green and environmentally friendly. It has passed the national EMC test to have no electromagnetic pollution, and the light is extremely stable, no flicker, and high illumination, low glare, comfortable light color, which is conducive to visual health.

High reliability. AC and DC dual-use; The voltage fluctuates in the range of 150-265V, and the ambient temperature is -20 to +50 It works stably as usual, without maintenance, and is highly resistant to vibrations.

Instant start-up. Due to the high-frequency electromagnetic coupling mode, there is no warm-up time for ordinary mercury lamps, metal halide lamps, and fluorescent lamps to start, and the start-up and re-start can be instantaneously lit.

High color rendering. The color rendering is more than 80, the color temperature is 2700-7000K, the light color is soft, close to daylight, which can be better coordinated with the atmosphere of the lighting environment, and is suitable for lighting required by different occasions.

I won't say that it's so troublesome, if you want to achieve the lighting effect of 1000W incandescent lamp, you need 200W induction lamp. Or if the requirements are not very strict, 165W for high frequency and 150W for low frequency are basically the same.

Light effect. In the case of guaranteed color rendering index ra=80:

The luminous efficiency of high-frequency induction lamps is generally 60lm w, and the highest is not more than 65lm w.

The luminous efficiency of low-frequency induction lamps is generally 80lm w, and the maximum can reach 90lm w.

A low-frequency induction lamp of the same power is 25% more efficient than a high-frequency induction lamp, that is, 25% brighter than a high-frequency induction lamp.

3) Power. Power range of high-frequency induction lamp: 20W-165W Power range of low-frequency induction lamp: 15W-400W

The power range of low-frequency induction lamps is large, and 400W low-frequency induction lamps can replace 800W metal halide lamps, which is very suitable for high-power factory lighting.

If the amount of semi-finished products at the end of the month is large or the construction period is longer, the accounting should be carried out and the relevant material costs should be carried forward to the cost account of the product section. If the quantity is not large (refers to the number of occupied materials and the number of finished products in the month) or the construction period is not long, it can also be ignored and there is no need to carry forward.

Factory lighting to see if you use it indoors or outdoors? Therefore, there is no way to make a choice between the choice of lamps and light sources, and it is recommended to find Qichen lighting manufacturers to focus on factory lamps.

This should be considered according to the specific situation of your workshop, such as height, area and lighting effect. For example, the following wiring-free, seamlessly connected LED workshop line light is very good.

What factory, how big, how high?

Do you want local or ambient lighting?

It is better to use induction lamp, because the working life of induction lamp is 12 times that of general energy-saving lamps and fluorescent lamps, more than 6 times that of metal halide lamps and high-pressure sodium lamps, and the power consumption is 45% lower than energy-saving lamps, and 50% lower than metal halide lamps and high-pressure sodium lamps.

It is recommended to use the induction lamps provided by Shangyou Lighting.

It has the following characteristics:

1. Ultra-long life: there is no filament and electrode in the body of the induction bulb, and the life of the bulb only depends on the natural attenuation of phosphor, which is the longest life of all light sources. The design life index of low-frequency induction lamp is 100,000 hours (Shangyou promises 5-year shelf life), and the life index of integrated low-frequency induction lamp or high-frequency induction lamp is 60,000 hours (Shangyou promises 3-year shelf life), which is 50 times that of incandescent lamps and 10 times that of metal halide lamps.

2. High efficiency and energy saving: the luminous efficiency of the system is up to 95 lm w, and the power factor is more than 99%, which reduces reactive power loss; It is more than 85% more energy-efficient than incandescent lamps, and about 50% more energy-efficient than high-pressure mercury lamps and high-pressure sodium lamps.

3. Green environmental protection: using solid amalgam and lead-free glass, 99% of the materials can be used, in line with the requirements of international environmental protection organizations; No flicker, low glare, completely eliminate eye fatigue; The current harmonic is small, in line with the national electromagnetic compatibility standard (GB17443-1999), and there is no interference with the outside world.

4. High color rendering: small light decay, color temperature 2700K 6500K, color rendering index 80, soft light color, presenting the natural color of the object. 2000 hours luminous flux maintenance rate of 95%; 20,000 hours luminous flux maintenance rate of 80%; 60,000 hours of luminous flux maintained at 75%.

The color temperature ranges from 2700K-6500K, and a variety of color bulbs are available.

5. Instant start and restart: the first start and restart time is seconds, no need to warm up, and the number of switches is 200,000 times.

6. Good shockproof and explosion-proof performance, wide working temperature range: because there is no filament and electrode in the bulb, the seismic performance is good; In addition, the surface temperature of the bulb is low after ignition, which is suitable for explosion-proof places. Works fine in the range of -40 +50.

Induction lamps are used in energy-saving renovation solutions for factory lighting.

As the global energy situation becomes tense, the energy shortage has had a huge impact on the manufacturing industry, which is known for its high energy consumption. It is the general trend for manufacturing enterprises to take the road of energy saving. Enterprises have more than 20% of the potential for energy saving, due to the lack of energy-saving renovation funds and energy-saving consulting services, heavy energy consumption costs make the cost of enterprises greatly increased, not only make the power tight, but also pollute our living environment.

The following is an analysis of the current situation of most factories and enterprises. Analysis and suggestions of plant lighting renovation scheme:

For the factory lighting design scheme, the main problems we need to consider are:

1.Understanding the production process, operation mode and form of the workshop, the layout pattern of the workshop equipment and the required lighting brightness, etc., these objective conditions are the main reference elements for the workshop lighting design.

2.While satisfying the customer's sensory needs such as brightness, it is necessary to give people a feeling of visual comfort. 3.Energy saving, consumption reduction, and good economic benefits are the directions to be considered and pursued in the design.

As we all know, energy consumption is mainly concentrated in the industrial sector. According to the report, last year, Guangdong's industrial energy consumption accounted for the province's energy terminal consumption, and the "big head" of reducing industrial energy consumption should be the top priority in the work of energy conservation and consumption reduction, and it is the general trend to vigorously promote the application of energy-saving lighting products. In order to meet the needs of medium and high-end users in specific markets (factories, commercial stores, offices, schools, railways, hospitals, street lamps and other industries and fields that need large-area lighting and pay great attention to energy conservation), induction lamps can bring more than % benefits to such users such as improving the lighting environment and increasing the power-saving efficiency to more than %.

New scheme for transformation (low-frequency induction lamp): 1Introduction of induction lamp, induction lamp has the following characteristics:

Ultra-long life: There are no filaments and electrodes in the body of the low-frequency electrode bulb, and the lamp life depends only on the natural attenuation of phosphor, which is the longest life of all light sources. The design life index of low-frequency induction lamp is 100,000 hours, and the life index of integrated induction lamp is 60,000 hours, which is 50 times that of incandescent lamps and 10 times that of metal halide lamps.