What should be the idea of Boore floor paving?

In home decoration, the paving of wooden floors is one of the major items. And it directly affects the effect of the decoration of the whole room. Boer flooring introduces you to some points that should be paid attention to when paving wood flooring for your reference.

Common quality problems when laying wooden floors.

The common quality problems in the installation of wooden floors are the sound of empty drums, uneven surfaces, loose joints, and local warping when walking.

1. The reason for the sound of hollow drums is that it is not fixed, mainly because the number of nails on the wool board and keel, wool board and floor is small or not firm, and sometimes it is; It is caused by shrinkage due to the change of moisture content of the plate or the unqualified glue. Therefore, it is particularly important to strictly inspect the quality of the board moisture content and adhesive. It can only be used after passing the inspection, and the nails should not be too few when installing.

2. The main reason for the uneven surface is the uneven base or the deformation and bulging of the floor strip. During construction, the level should be applied to level the surface of the keel, and if it is uneven, the skids should be adjusted. A small ventilation groove should be made on the keel.

The edge of the board should be 10 mm away from the wall for ventilation. The insulation and soundproofing material must be dry to prevent the board from bulging after being wet. The flatness error of the surface of the wooden floor should be within 1 mm.

3. In addition to the non-standard installation during construction, the width and size error of the plate and the poor processing quality are also important reasons.

4. In addition to the moisture deformation of the board, the main reason for the local warping is that the joints of the wool board are too small or seamless, and the water pipes and other leakage blisters are caused by the wet board. After the floor is paved, the paint film should be intact when the floor paint is painted, and the water on the surface layer should be cleaned up in time to prevent water from flowing into the lower part of the floor in daily use.

Acceptance of the construction of wooden floors.

The material variety and grade of the wood floor should meet the design requirements, the moisture content should be about 10%, the wooden keel and skids have been treated with anticorrosion, the wooden keel should be installed firmly and straight, the spacing and fixing method should meet the requirements of the specification, the plate surface is firmly nailed, no loosening, the paste is firm, there is no hollow drum, and the varieties of glue used meet the requirements of the specification.

Visually inspect the surface of the wood floor planed and polished, no wound marks, clear patterns, consistent color of the clear oil layer, correct pavement direction, tight layer joints, staggered joint positions, and clean surface. The skirting board is laid with tight joints, smooth surface, and consistent height and wall thickness. The Boer floor is inspected with a 2-meter ruler, and the ground flatness error is less than 1 mm, the gap width is less than mm, the straightness error of the upper mouth of the baseboard is less than 3 mm, and the straightness error of the seam is less than 2 mm.

Calculate the construction period of wood flooring.

Wood floor construction is a highly technical project and should not be worked in parallel with other projects. Generally, it takes a week to complete the construction task of three bedrooms and two living rooms, including two days for the installation of wooden keel and moisture-proof treatment of the base layer, two days for the installation of wool board and floor, one day for planing and smoothing of the floor layer, and two days for floor paint painting. The actual laying method of Boer floor is less than the empty laying method, and the large specifications of the floor are more labor-saving than the small specifications, and the speed of the floor paint drying should be determined according to the specific time, construction method and material variety.

The traditional floor installation has a series of problems such as empty drum sound, uneven surface, loose joints, local warping and other problems, while Boer double lock floor nail-free, glue-free, keel-free, seamless, silent, non-arching, repeated use and other advantages, these problems do not have to worry.

Buying Boer flooring, paving is also responsible for special personnel.

The floor installation is free to install the master, and we usually pay attention to the maintenance of the floor.

1.See the material clearly.

Different kinds of wood ** difference is also very large, some manufacturers in order to sell the amount of tung paulownia, often give a lot of good names to the wood, but these names are easy to confuse consumers, in order to prevent manufacturers from shoddy, we must carefully inquire when buying, identify wood, do not buy home only to find out that fooled, causing a series of troubles.

2.Look at the appearance.

When we select wood, we should first look at the cross-section of the wood, whether the texture is chaotic, whether there is a quality problem of smart matching, and also pay attention to the smoothness of the floor board and lacquer surface, to see whether there is blistering or paint leakage on the surface, and also to avoid some treatments done in order to demonstrate the defects of the board.

3.See if there is a quality problem with the wood.

In addition, the solid wood floor is a natural wood product, and if there is a color difference or unevenness, the quality of the front cherry blossom of the wood will not be affected. However, if the floor is cracked, rotten or mildewed, it means that the board is not good.

4.Look at the moisture content of the board.

The moisture content of wood in different regions is also different, according to the standard, the moisture content of wood flooring is generally about 8%-13%, due to regional differences, the moisture content of the floor in the north is 12%, and the moisture content in the south should be controlled within 14%. When purchasing, we can measure the moisture content of some wood floors on site, and the error of 2% is considered qualified.

5.Different areas choose different flooring strengths.

The strength of the floor is determined by the density of the wood, and the density of the wood is higher, the stronger the floor will be. And the strength of the floor required is different in different areas. For rooms like the living room and dining room, which we often go into, then the floor should be made of high-strength wood to prevent people from stepping on it often and causing deformation.

In areas with high privacy, such as bedrooms, the strength of the floor will be relatively soft, such as eucalyptus flooring.

6.Choose a reputable merchant.

Generally reputable merchants, pre-sale, sale, after-sale are relatively good, the quality of the plate is more guaranteed, because the floor is something we often come into contact with, so quality is very important, choose quality merchants, you can avoid a lot of unnecessary trouble, quality can also be guaranteed.

In short, when choosing solid wood flooring, we must carefully choose the floor with good quality and good reputation, which is not only good-looking, but also environmentally friendly, and will not affect the health of the family.

The advantages of Boer flooring are countless, whether it is cultural inheritance or product innovation, Boer flooring is slightly better than other brands. In addition, Boer flooring also has high-quality after-sales service, for example, after we buy Boer products, we can enjoy "five-year warranty commitment" and "lifelong maintenance service"! These are the advantages of Boer flooring, in short, it is a combination of many advantages!

In addition, there is no need to worry about the quality of its products, and each floor of Boer is qualified through testing before it can leave the factory; And there are also many consumers who report that there is no problem with the use of Boer flooring for three years, and there are few scratches.

So, if you are interested in choosing Boer flooring, you can rest assured that you can make a bold choice!

1. The product quality is exquisite.

Zhejiang Boer Wood Industry was established in 1996 and is the best brand in the geothermal floor market. The company has 15 years of development, in 2003 Boer began foreign trade operations, products in the United States and Canada market repercussions. In 2009, Boer implemented a new VI image and a series of new brand products of the systematic construction, in terms of product quality to ensure that each piece of flooring is technically exquisite, and innovatively launched BR aviation service, so that consumers have no worries at all.

2. It is convenient and comfortable to use.

After years of research and development, Boer double-lock pure solid wood geothermal floor finally came out, which broke the legend that solid wood flooring in the industry can not be used for geothermal flooring, and pushed the geothermal floor industry to a new level. Boer floor adopts double lock mute technology, and the special mute material (PE layer) is attached to the tongue part of the lock product with equipment, which effectively avoids friction between the wood after wet expansion and contraction, plays the role of isolation and buffering, and can also completely control the noise within 30 decibels, so that consumers can use it more comfortably and quietly.

3. The goods are exported to home and abroad.

Boer flooring does not have time to expand the scope of its own business, and from the present, start the current work, and strive to improve the quality of its flooring products, in order to enhance their core competitiveness. When everything was ready, it began to stare at the development of some of its own pure hands. The company's sales market is not only in China, but also sells its flooring products at home and abroad.