How to grow flowers with cinders? Can cinder soak for a day to grow flowers?

The use of cinder to plant flowers is a good idea and choice, in fact, there are a lot of domestic garbage that can be used in our lives; Like rice water, tea, melon seed shells, leftovers, etc., are all fertilizers and substrates for raising flowers.

And cinder is also one of them, because cinder has a lot of trace elements (minerals, silicon, aluminum), which can timely replenish the nutrients needed by flower plants in the growth process, and at the same time, it is porous and loose and breathable, and the use of cinder to raise flowers will not accumulate water.

The cinders here are actually us.

The honeycomb cinder that is often used in life, but this honeycomb cinder can not be used directly, because the burned cinder is too alkaline, which is extremely unfavorable to the growth of potted flowers that like acidic and neutral soil, and if it is directly used as fertilizer, it is easy to cause the leaves of flower plants to fall off, and in serious cases, it will directly lead to the death of the whole plant. So how do you use cinder to grow flowers? What are the precautions in the process of planting flowers?

Is cinder suitable for all potted flowers?

1. Tips for using cinder flowers: 1. Cinder flowers must be soaked in advance before use. We can first prepare a discarded basin or bucket, first talk about the basin or bucket to clean one side, and then put a few cinders in it, put a certain amount of water, preferably over the cinder ball.

Then soak for 3-5 days.

2. Dry the soaked cinders to a semi-dry level. Remove the soaked cinder balls from the basin or bucket and place them in a well-ventilated and well-lit place to dry (about 2-3 hours).

3. After drying, use a wooden stick to break the cinder ball.

In the process of crushing, it is necessary to ensure that the particles of the crushed slag are uniform. Neither too large nor too small (in powder form). The particle size is controlled at 2-3 mm.

4. Rinse and filter the crushed cinders with water 2-3 times through a sieve. Use a sieve to leave relatively uniform particles, using the plant to take root during growth.

2. Precautions in the process of cinder planting: 1. Before using cinder, we need to carefully select, like the kind of granular cinder containing black to pick out one by one, because these black ones are not completely burned, contain harmful substances and are not easy to be fused by the root system of the plant.

2. Cinders that are not soaked in water and washed should never be used to raise flowers, because it is easy to cause yellow leaves, and even rotten roots in serious cases.

3. Cinder flowers can not be used as fertilizer, but can only be mixed with fertilizer to continuously supplement the nutrients needed for flower potting, because the cinder itself does not carry many trace elements.

3. Applicable flowers for cinder flowers: Considering that cinder is generally used in soil mixing, it can only be used as a medium for cultivation, because it has the function of breathability and water absorption, so it is very good to raise plants such as succulents and cacti. However, the amount of cinder should not be used too much, but the root part can still be mixed with cinder in an appropriate amount.

Summary: Although cinder is good for raising flowers, the amount used should not be too much and cannot be used instead of fertilizer. Before use, it should be disinfected first, and then soaked and rinsed repeatedly, mashed evenly before use, and the amount of use and the way and method of use should be determined according to the growth habits of different flowers.

Cinder should be treated to raise flowers, to choose completely burned cinder, after soaking for a few days, sieve off impurities and very fine dust before use, and cinder is not nutritious, long-term use needs to be matched with organic fertilizer.

Cinder can be used to raise flowers, but to pick the cinder that is completely burned through, and not all of the cinder to raise flowers, you can add it to the soil where you usually plant flowers, which will achieve good results.

The cinder can be planted after soaking for about a week.

But it's not directly crushed, it can be used after soaking in water, and it needs to be treated. After crushing, it should be placed in a basin for screening, and the coal that is completely burned through and not burned is unusable. In addition, the proportion should be controlled when the soil is allocated, which is determined according to the cultivated plants.

Like loose, permeable soil is more doped, on the contrary, less, after the soil is exposed to the sun and disinfected before it can be used.

When raising flowers and preparing culture soil, add some cinder particles in an appropriate amount, which can not only increase the permeability of the soil, but also contain rich mineral elements in cinder, which is also very beneficial to the growth of flowers.

Precautions for the use of cinder:

Honeycomb cinder needs to be soaked in water, of course, some people do not soak it when they use it, but they will break it, in fact, the purpose of this is to prevent dust, if the cinder is broken, it must be controlled at one centimeter of particles.

So that the screening work is completed, and then use a sieve with a smaller sieve hole, and finally use a sieve with a sieve hole of about one millimeter, so that the particles of different sizes can be sieved out. The particles are arranged according to different sizes, and then the particles of different sizes are soaked and dried before use.

Cinder is the residue left over from the combustion of briquettes, which is a good material for growing flowers.

Hello, crush the cinders. Use any method at will, step on it with your feet, smash it with something, it is best to break it into particles the size of lotus seeds, and if you knock it too much, it will become powder and it will be wasted. 2/4

The cinders obtained after the first sieving are sieved twice with a finer screen. This time, the particles that are too fine are being sifted out. Because too fine particles do not help to improve the soil quality, but will make the soil clayey and heavy.

The number of mesh holes for the secondary screen depends on the minimum diameter of the cinder you need. 3/4

Cinder particles of moderate particle size are obtained.

After the first and second sieving, those that are too fine, too coarse and unbreakable should be discarded.

Then soak in water for a day. Elimination 4

4. Its fire gas (water absorption), wash away harmful substances; At the same time, the particles that are easier to crush will also disperse under the soaking of water, and the last thing that remains is the strong and durable briquette particles we want.

After soaking for one day, it is filtered through a fine sieve again, and the particles that are easily blistered are eliminated in this sieve. The remaining particles are the ideal particles that we need.

Finally, put the cinder in a large pot and drain it, and wait for it to dry before you can use it Breathable and permeable, the use effect is no worse than that of blue stone, light stone or phytophyllite;

2. Contains a lot of trace elements, such as iron oxide, calcium oxide, magnesium oxide, etc.;

3. Contains a large amount of burned stones, loess and other succulents required for planting;

4. Reduced to almost zero cost medium, especially for those who plant in large quantities, it plays a large number of filling advantages.

Disadvantages of cinders:

1. After combustion, the sulfur and other things produced make it more alkaline, so it needs to be soaked in water and used better;

2. Sometimes, some honeycomb coal has not been fully burned, resulting in more black particles produced during screening, and this honeycomb coal is best to be picked up and discarded manually;

3. If it is not screened directly, it is too dusty, if it is directly used with soil, sometimes the root system will cause the plant to rot roots or rot probability because of the impermeable medium, sometimes after the medium is completely dry, and then watering, then you will find a particularly fatal problem, that is, the water can not eat through the medium, when the water floats on the surface of the medium, the sludge will be splashed everywhere, personal advice or after screening out a reasonable size of the granularity, after screening, it is best to rinse with water and dry for later use. FYI.

Honeycomb coal flowers must be soaked in water for a few days, and then the particles should be made smaller, and not too much.

Cinder flowers need to be screened and rinsed with water.

1. Screening cinders.

Before the cinder is planted, the cinder needs to be crushed, the fine powder is sieved with a fine eye, and the small black coal that is not completely burned is picked up, and only the thick and fine cinder particles are retained, which can not only improve the drainage and air permeability of the soil, but also not easily affect the root growth.

2. Rinse with water.

The selected cinder particles are put into the clean water to rinse, and the dust on the surface needs to be rubbed repeatedly, and after the water becomes clear and transparent, the cinder particles can be fished out and placed in a ventilated and sunny place to dry. When using cinder to raise flowers, you can spread a layer of cinder particles at the bottom of the pot to ensure that the soil is well drained.

The benefits of cinder flowers

1. It can increase the air permeability of the soil.

Poor ventilation in the pot will cause plant roots to rot, but if we spread a layer of cinder into the pot before the plant is soiled, we can solve this problem. Because of this, Fengsong can effectively improve the air permeability of the soil, and the plants will grow more lushly.

2. Prevent water accumulation and agglomeration in the basin.

When raising flowers, we often put some ceramsite at the bottom of the pot because it can prevent water accumulation in the pot. If we pat the base pin and put some cinders at the bottom of the pot, this can not only effectively drain the water in the pot, but also better protect the root system of the plant.

3. Replenish nutrients to the soil.

Cinders are a particularly useful fertilizer that can effectively replenish nutrients to plants. Before the plant is put into the soil, we put some cinder into the soil, because the cinder can release some elements, which can effectively add a certain amount of nutrients to the plant.

The treatment method of cinder planting flowers is to screen the coal deficiency slag particles and rinse them with water.

1. Screening cinder particles.

Before raising flowers with cinders, the honeycomb coal should be crushed, and the cinders of the coal blocks should be directly put into the fine-eye sieve, and some fine powder should be sieved down.

2. Rinse with water.

After screening out the cinder particles, pour it into the clean water, rub and rinse it repeatedly, clean the dust on it, and wait until the rinsing water becomes clear, and then take it out and dry it to prepare flower soil.

The method of cinder flowers

1. Prepare culture soil.

Cinder can only be used with other soils, because after all, nutrients are relatively scarce, can only be used to improve the permeability of the potting soil, you can directly pad a layer at the bottom of the pot, or you can add 20% 30% cinder when preparing the flower soil, mix it evenly, to increase the permeability and air permeability of the soil.

2. It is used to raise succulent branches.

Succulents need to be raised with very good water permeability and air permeability, and the more used is vermiculite, perlite, peat, etc., in fact, cinder is also a good material for raising succulents, which can be matched with some other soil to raise succulents.

Min Qi 1, after the coal has been used, the remaining cinder is a whole piece, we can't directly use the whole cinder to plant flowers, so we need to use tools to crush the whole cinder.

2. We have to prepare a sieve, the first step is that we have crushed the cinder socks, and now you can directly put the cinder in the sieve, and the result will screen out a lot of granules of different sizes, if you feel that the first sieve is not careful, you can sieve several times, and finally get the cinder, these granular cinders are the key to planting flowers.

3. Put the cinder after the sieving above into a container and pour water to soak. When pouring the water, just over the cinders.

4. This step is the key to the whole process, we need to find a sieve with a diameter of millimeters to screen cinders in water, why in water? Because there is no interference of dust in the water, we use a millimeter sieve to screen out the cinders and put them in another container, and then we need to find a sieve with a smaller diameter, about 1 mm is OK, and screen again, this time we must screen out the cinders with smaller particles and put them in another container for preservation, and then, look for a smaller diameter of a good sieve again for screening, and select a smaller cinder to put in another container. The remaining cinders are useless and can be directly discarded.

5. Soak the cinders of different diameters sorted out in the previous step in their respective containers, and then dry them in the sun for later use.

Can coal slag be planted with flowers.

Cinder can be used to grow flowers, because cinder has strong drainage and air permeability, and also contains a variety of trace elements, such as iron oxide, magnesium oxide, calcium oxide, etc. Usually, after the cinder is burned at high temperature, there is basically no germ residue, so it will not cause bacteria infection in the flowers.

Key points of coal slag planting flowers.

What flowers are suitable for coal slag.

Cinders are more suitable for long meat. Of course, cinders can also be used to grow some other flowers.

Coal slag planting method.

First, crush all the cinders. After crushing, separate them with a sieve to select smaller particles. The small particles can then be dried again to remove the debris and then ready to use. Such slag is more suitable for growing flowers.

Precautions for planting flowers in coal slag.

It should be noted that cinders are weakly alkaline after calcination at high temperatures. Although cinders do not contain pests and diseases, they basically do not contain nutrients, and they are so angry that it is impossible to plant flowers directly. Before planting flowers, be sure to soak them to remove the fire, break them and sieve them before using them.