How much light does it take on both sides of a 5 meter high street lamp

The amount of light on both sides of a 5-metre-high street lamp depends on the range and intensity of the lamp. Generally speaking, the illumination range of a street light is determined according to the power of the street lamp, the type of fixture, and the beam angle of the fixture.

For general street lights, the illumination range is usually 2 to 3 times the height of the street lights. Therefore, for a street light with a height of 5 meters, its illumination range may be between 10 meters and 15 meters.

Illumination intensity refers to the power of light received per unit area, usually measured in lux. The amount of light intensity depends on the power of the street lamp, the type of fixture, and the beam angle of the fixture.

In general, lighting standards for urban roads require light intensity between 10 lux and 20 lux. Therefore, for a 5-meter-tall street lamp, the light intensity on both sides may be between 10 lux and 20 lux.

It is important to note that this is only a rough estimate, and the actual lighting situation may be affected by the specific design, installation location and environmental conditions of the street lights. In addition, the lighting standards for street lights may vary from region to region and country.

In summary, the light on both sides of a 5-meter-tall street lamp is roughly in the range of 10 to 15 meters, and the light intensity can be between 10 lux and 20 lux.

Low beam exposure distances within 30-40 meters are normal.

The height adjustment of the low beam is generally adjusted to the zero initial position. The initial position gear is the manufacturer's standard low beam position at the beginning of headlight calibration. The reason why the low beam has 12345 steps of height adjustment is because when the weight of the body increases, the illumination position of the headlights will be offset, so the height adjustment of the low beam is different from car to car, and the 12345 gear indicates the order of the vehicle from light weight to important adjustment.

The low beam has 12345 gears, and the farthest light hits the 5th gear. Low beam exposure distances within 30-40 meters are normal.

Adjust the lighting. 1. First of all, find a wall with a vertical ground, and make a sign at a position of 40-80 cm from the ground, and the sign on the wall is as large and obvious as possible to facilitate adjustment. After the sign is made, park the car one meter away from the wall and parallel to the wall.

2. Turn on the headlights and adjust to the low beam gear and adjust the height to the initial position of 0, at this time the vehicle should be empty. Then observe whether the light is offset from side to side or the height is offset.

3. If the headlights are high or low, you can adjust the knob to the appropriate height by constantly toggling the adjustment knob.

6m high lamp pole LED is often equipped with 30W-40W light source, the distance between the two lights is about 20m, the theoretical area S = R =, the actual can not reach so much, the lamp head is angled, just like our common double-arm street lights only light the motorway, and the non-motorized lane is still a little bright, and the actual brightness covers about 200m

70W sodium is about 6mx5m, depending on the power.

The irradiation range of 4 meters street lamp is about 15-26 squares, which is determined according to the size of the light angle! In addition, the brightness is determined by the luminous flux of the light source, and the brightness of a good imported chip is high!

Hello, about 20 meters away, senfa, for your answer, I hope it can help you!

A 5-meter-high street lamp means that the overall height of the streetlight is 5 meters. Street lights need to be set up taking into account the needs and safety of lighting.

First of all, the height of the street lights needs to be determined according to the width of the road and the traffic flow. Generally speaking, the wider the road and the greater the traffic flow, the height of the street lights needs to be increased accordingly to ensure the lighting effect of the road. For general urban roads, 5-meter-high street lights are a relatively common setting.

Secondly, the spacing of street lights also needs to be determined according to the width of the road and the traffic flow. Generally speaking, the wider the road, the greater the traffic flow, and the spacing of street lights needs to be increased accordingly to ensure that the road is evenly illuminated. In general, the spacing of the street lights can be set between 2 and 3 times the height of the street lights.

In addition, the illumination range of the street lights also needs to be considered. In general, the illumination range of a street light should be able to cover the full width of the road and be able to illuminate the sidewalks and buildings on both sides of the road. According to the height of the street lamp and the illumination angle of the lamp, the illumination range of the street lamp can be calculated.

Finally, the setting of street lights also needs to take safety into account. Street lights should be set up in such a way as to avoid obstructing traffic signs and traffic lights to ensure smooth and safe traffic. In addition, the setting of street lights also needs to take into account the influence of the surrounding environment, such as buildings, trees, etc., to avoid creating shadows and interfering with the lighting effect.

In summary, the setting of a 5-meter-high street light needs to be determined according to the width of the road, traffic flow, lighting needs and safety. In the actual setting, it is also necessary to consider the spacing of street lights, the lighting range and the influence of the surrounding environment to ensure the lighting effect of the road and the safety of traffic.

Summary. Hello, it is a pleasure to have your problem, the solution to your problem is as follows. The foundation of the 5-meter light pole is one meter deep.

Because the base of the pole should be deep, so that the pole can be fixed. If the foundation of the pole does not reach a depth of one meter, the pole is prone to tilting. So how high the pole is, how deep the foundation must be.

The 5-meter-high pole foundation needs to be at least one meter deep, if the pole foundation is not that deep. Poles are easily tilted by the wind, and the lights will often break.

Hello, it is a pleasure to have your problem, the solution to your problem is as follows. The foundation of the 5-meter light pole is one meter deep. Because the base of the pole should be deep, so that the pole can be fixed.

If the foundation of the pole does not reach a depth of one meter, the pole is prone to tilting. So how high the pole is, how deep the foundation must be. The 5-meter-high pole foundation needs to be at least one meter deep, if the pole foundation is not that deep.

Poles are easily tilted by the wind, and the lights will often break.

The depth of the foundation is generally 1 6-1 8 of the height of the light pole, and the length and width are determined according to the lamp type of your street lamp, which is generally 600mm-800mm square. In addition, there should be 4 embedded screws on the foundation (the minimum should not be lower than M20), and the embedded size of the screws is generally 600mm-800mm, don't forget to add the embedded PVC casing.