What should I do if the watch hand is not allowed after the repair of Lange watches

Hello, glad to answer for you!

The main reasons why the watch does not go are the misalignment of the core gear, the magnetism of the watch, bumps, and the long shelving time, and the oil sludge is dry. The most common reason for the failure of the watch not going is the lack of power of the watch and the movement of the watch does not work.

When the mechanical watch suddenly stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

A fully automatic watch is wound entirely by the swing of the arm.

Therefore, if the watch is left for too long or the amount of arm activity does not meet the requirements of the watch winding every day, the watch will cause the mainspring to be winding and the potential energy is insufficient, which will cause the watch to be unstable or stop when it is not worn at night.

If this happens, we can manually do an arc movement before the watch is placed. Or use the manual winding function to wind the watch. This keeps the watch with enough kinetic energy storage to keep it running until the next day.

If there is a problem with the watch, it is recommended to go to the regular point of after-sales maintenance, not only the technician is more professional, the instrument is also more precise, and the **transparent is not messy**. My personal advice is to pass as soon as possible, otherwise the longer the time, the greater the problem with the watch, and the greater the economic loss. The main thing is that it is still more troublesome, and the repair time will become longer.

A. Lange & Söhne watch repair points include Hefei service points, Shanghai service points, Nanjing service points, Beijing service points and Zhejiang service points.

Lange & Söhne Watch Hefei Repair Service Point is located in Room 03, 12th Floor, Block B, China Resources Building, Vientiane City, No. 111 Qianshan Road, Shushan District (Government Affairs District), Hefei City. A. Lange & Söhne Watches Shanghai Service Point is located in Room 1003, 10th Floor, Hongyi International Office Building, No. 299 Nanjing East Road, Huangpu District, Shanghai.

A. Lange & Söhne Nanjing Repair Service Point is located at C1, 22nd Floor, Nanjing Center, No. 1 Zhongshan South Road, Qinhuai District, Nanjing, Jiangsu Province (Xinbai Office Building). The Beijing service point of A. Lange & Söhne watches is located in Room 702, 7th Floor, Joy City Office Building, Xidan, Beijing. Lange & Söhne Watch Zhejiang Repair Service Point is located in Room 06, 26th Floor, Block B, 10th Mixc Chenghua Building, 30th Floor, Kunhe Center, Block C, Hangzhou Building, Zhejiang Province.

Precautions for daily wear

The main thing to pay attention to in a quartz watch is the battery and temperature. Be sure to pay attention to the power of the watch, do not replace it with a new one after the battery is used up, it will affect the normal operation of the watch, and the battery in the watch for many years may cause damage to the movement.

Mechanical watches should be anti-magnetic, anti-violent shaking, and anti-collision. When we wear or take off our watches, we must not put them next to TVs, stereos, computers, etc.

In addition to going to the official website to check the outlets and mailing them to the counter for maintenance, you can choose to go to some large and regular repair centers for repair.

The A. Lange & Söhne service center is still very good, their service attitude is very good, and the most common conditions of A. Lange & Söhne mechanical watch repair are nothing more than water ingress and collisions. Unless a Lange & Söhne mechanical watch is indicated as waterproof, it is important to avoid water ingress into the case, because water can cause mechanical corrosion, and it is very destructive, and it is not only waterproof, but also anti-collision.

Generally, A. Lange & Söhne watch repair service is mainly divided into two aspects, one is the official after-sales service center, and only a small number of areas have after-sales service points. There is also a special maintenance and maintenance service center, which is different in each region and different service centers. For detailed information, you can log in to ask the watch repair technician, and thousands of famous watch repair technicians provide ** consultation.

The concept of the product

A. Lange & Söhne's new SAXONIAANNUALCALENDAR combines the concept of a calendar with a sophisticated mechanism in a unique time instrument. Beneath the clean, well-proportioned and elegantly proportioned dial is a sophisticated automatic movement that automatically recognises and accurately advances the day, date and month, while the calendar mechanism only needs to be adjusted once a year.

The three date indications and the moon phase display are placed in harmony on the dial, creating a delicate harmony. For the first time, A. Lange & Söhne uses a patented outsize date display for a wristwatch, with numerals three times larger than in a typical wristwatch. This innovation not only makes the date display more visible, but also simplifies the procedure for setting the time.

Instead of setting the date with the crown, it uses a more convenient pusher that pushes forward the date by one day with each press.

The above content refers to Encyclopedia-Lange.

Generally, the after-sales of Lange and Söhne watches is about 1 or 2 years, and the specific time is subject to the watch manual and the merchant. Generally, the appearance accessories of the watch are not within the scope of the warranty, and the man-made damage cannot be held by the warranty, so when using the watch, it is necessary to pay attention to avoid bumping and leaking, so as not to cause unnecessary economic losses.

Generally, the after-sales time of Lange watches is about 1 2 years, and the after-sales time of Lange and Söhne watches is about 1 2 years, so the specific after-sales time is still subject to the watch manual and the purchase merchant, and it is recommended to carry out warranty services as soon as possible. However, it should be noted that the appearance accessories of general watches are not covered by the warranty, including the case, strap, watch handle and appearance accessories.

Generally, newly bought Lange watches can be returned within 7 days, and can be exchanged or repaired within 7 to 15 days, if it exceeds 15 days, it can only be repaired. It is recommended to try to wear a new Lange watch first, and if there is a problem, replace it in time to avoid unnecessary economic losses.

If you find that there is a quality problem with the Lange watch, you must first bring the watch warranty documents and invoices and other related items during the warranty period, and then make an appointment for warranty in advance. When using the watch, you must be careful to avoid bumps, because the failure of the Lange watch is damaged by man, and this situation is not warranted.

What should I do if my Lange watch is not on time?

According to the watch repair technicians at the Lange service center, it is not uncommon for Lange to malfunction watches. When the watch fails, how should we tell where the watch is malfunctioning, and how should we judge and fix it? The failure analysis of the watch is only a judgment on where the fault occurred.

In order to accurately determine the location or parts of the malfunction occurring, the watch must also be subjected to a special examination. The advantage of watch failure analysis is that the inspection range is reduced. This will reduce the hassle of disassembly and the possible losses.

When inspecting the watch, it is first possible to determine which part of the route where the failure occurred based on the watch's three working routes, and then inspect the damaged parts.

1. If the transmission system fails, in the form of direct transmission, the sub-wheel is sleeved on the crown of the central wheel part, and the rotation of the central wheel depends on the friction to drive the sub-wheel to follow. When the transmission system fails, it affects the movement of the pointer. The maintenance method is to restore the separator sleeve to the center wheel section on the crown, reducing friction.

2. Part of the two-wheel type failure, part of the two-wheel type three-wheel output transmission form, the elastic part of the auxiliary wheel is embedded in the groove of the auxiliary wheel, the composition of the wheel parts, and the friction between the sub-wheel and the sub-wheel are required to be long. Time to remain loose and suitable.

3. The head wheel fails, and in the transmission form of the first round output, the two sub-wheels are usually combined together to form a double wheel, and it is also easy to cause the pointer to fall off. The upper divider and the cross bushing are engaged, and the lower divider and the first wheel should be engaged (i.e., the chamber wheel).

Where is the A. Lange & Söhne watch after-sales repair location? What should I do if my Lange watch is not on time? You can go to the big shopping mall store to ask the waiter, or their counter must know the after-sales service point, you can consult them if they are not going, you can go to the maintenance point to consult, what is the reason?

If the original power is insufficient, or a mechanical problem, it will definitely be able to give you a correct answer.

Reasons why the watch is not running accurately:

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the automatic mechanical watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a continuous phenomenon of speed and slowness, if there is still a suggestion to send it to the after-sales center for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and send the watch to the after-sales center to check the battery or replace the battery.

3. Having been beaten or impacted. The watch is very tight, if it is hit or fallen, it may cause loose damage to the internal parts, and it may also cause time problems, it is recommended to go to the after-sales center for testing.

4. Maintenance is required. The lack of oil in the movement or the wear and aging of the internal parts may cause time problems, which need to be serviced and sent to the after-sales center for maintenance services.

5. The watch is magnetized: If the hairspring of the watch is magnetized, the watch will not be accurate.

The influence of the wearer's usage habits may cause an increase in the time error. Sending it to the after-sales center for inspection and adjustment can restore the watch to the normal error range.

The following is an introduction to the five common reasons for the inaccuracy of the watch time

1: Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is small, the power reserve may be insufficient, you can supplement the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2: Insufficient power: If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3: The watch has been hit or impacted: the watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4: Need maintenance: The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained, and needs to be sent to the designated maintenance point for maintenance services.

5: In addition to the above common situations, some ambient temperatures affect the watch by magnetism: if the balance spring of the watch is magnetized, the watch will not be accurate.

The reason for the mechanical watch to stop.

1.Insufficient power: mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of movement, and it can be directly manually wound to supplement the power.

2.No maintenance: mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear for a long time will produce iron filings, increase the friction between the gears, this kind of problem only needs to clean the movement, re-refueling.

3.Shock: A mechanical watch has a complex structure and is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop.

According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.