What should I do if the TAG Heuer watch after sales maintenance watch hand is not allowed

Hello, it may be a lack of motivation. If you need to wind a mechanical watch by hand.

Generally, the normal winding takes 30 times, and it is basically full, (provided that you want to be full) The winding watch on your hand actually doesn't matter, as long as you keep it up until you can't turn it, the mainspring is full.

If there is a problem with the watch, it is recommended to go to the regular point of after-sales maintenance, not only the technician is more professional, the instrument is also more precise, and the **transparent is not messy**. My personal advice is to pass as soon as possible, otherwise the longer the time, the greater the problem with the watch, and the greater the economic loss. The main thing is that it is still more troublesome, and the repair time will become longer.

Hello, glad to answer for you!

Reasons why the watch is not running accurately:

1. Insufficient power reserve. If the amount of exercise is small, it may also cause a lack of power reserve, so you can replenish the power by winding it manually, and then observe whether it continues to be fast or slow.

2. The watch has been hit or impacted, which may cause loose damage to the internal parts and may also cause the problem of running time.

3. The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained.

4. The watch is magnetized: If the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error. Sending the watch to a repair center for inspection and adjustment will restore the watch to its normal tolerance.

1.The power of the table is insufficient.

An automatic watch only needs to be wound by moving your arm, but if you don't exercise much, or if you don't wear your watch for too long, the watch may not be able to run out of time or stop due to lack of power. Of course, you don't have to throw your arms as a hula hoop in order to wind your watch, just move normally.

2.Wearing time is too short.

If it's really caused by too little exercise, don't worry, just take off your watch and shake it horizontally for about 2 minutes before going to bed, and of course you can also shake it for 4 minutes, because then it can walk longer. If your watch can be wound, you can also wind it clockwise. In order for your watch to last longer, it is recommended to have him wear it on your wrist for at least 6 to 8 hours a day.

3.Hairspring failure.

If neither of the above two reasons is the case, it may be the cause of the hairspring. If you exercise too much, the clockwork will be tighter. If it is really a lack of power caused by the winding, usually between 9 and 12 o'clock in the evening, the "calendar function table" at this time his needle wheel began to drive the calendar wheel, the load is large, the watch is tired, at this time if the power is insufficient and no one pushes it, it is easy to stop.

During this time, don't reverse the dial, many mechanical watches have a plastic calendar wheel, and if you are not careful, you will break the gear, if you break the tooth, it will be stuck at this time every day, or it will no longer jump until a fixed date. That's why the mechanical watch stopped.

4.Bump failure.

The parts of the watch are very delicate and small, if you are careless and accidentally bump into it, or if you are healthy and bump into it. This can easily cause the movement parts to fall off or break directly.

All automatic watches must be worn or wound regularly in order to function properly. If the mechanism stops working for a long time, it will cause the watch to deteriorate for a long time. Generally speaking, the power reserve of a large three-hand watch is probably no more than 38 hours, which means that if you do not wear the watch for more than 45 hours, the watch will eventually stop due to the exhaustion of the mainspring.

If you only have one or two automatic watches in your collection, you won't have to worry about wearing them often or stopping them to wind them in order to wind them. But if you have a large collection of mechanical watches, you have to make sure that all the watches don't stop, and everyone will feel a headache and trouble.

1.If the watch suddenly has an abnormality, it is likely that it is due to magnetism. In daily life, all kinds of electrical appliances and equipment have magnetic components, including refrigerator doors, audio speakers, electric mahjong tables, etc., many consumers do not have any awareness of this when wearing watches, and the most effective way to demagnetize is to demagnetize the demagnetizer.

But be sure to remember to go to a regular and professional watch repair center to avoid some black-hearted watch repair shops to fix a bunch of problems.

2.The power of the automatic watch** mainly comes from the wearer's wrist activity, and the tabletop of the watch swings when the arm moves, so as to wind the watch, so when the wearer usually does not move much or does not wear it for a long time, the string force will be insufficient or empty, resulting in the watch not being allowed to go incorrectly or stopping.

3.The failure of the hairspring is also one of the causes of the watch stealing stops. When the watch has a large error, it is slow.

This could be a hairspring failure. The hairspring is part of the structure of the watch, it mainly affects the accuracy of the watch, it is elastic, it is an extremely delicate element of the watch, it is used to control the reciprocating motion of the balance wheel to do isochronous. The change of the effective length of the balance spring determines the moment of inertia and the amplitude period of the balance wheel, and the balance spring is also one of the factors affecting the accuracy of the time.

The fixing point of the inner and outer ends of the hairspring is also an important factor affecting the accuracy of the timekeeping.

There are many reasons for the stealing of mechanical watches, but in addition to failures, there are also problems with wearing habits that lead to insufficient power and stop-and-go. There are also some to ensure that there is enough time to wear every day

There are many reasons why the watch is not gone, such as lack of power, faulty gears, lack of maintenance, or damage to other internal parts. After this situation occurs, it is recommended that you take your watch to the relevant after-sales service center as soon as possible, or click on my homepage to inquire about it. We have professional technicians who can effectively help you solve the phenomenon of the watch not leaving, prescribe the right medicine, and also avoid the trouble caused by your own improper operation.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

The watch does not go for a reason.

Lack of power: Some friends do not wear the watch every day, or wear it for a short time every day, which leads to the lack of power of the automatic watch and the watch does not go. Automatic watches wind the watch by moving the arm, and if you don't exercise enough or don't wear it, the watch won't go.

This principle is the case with various brands of automatic watches.

Dead battery: The most common reason why a quartz watch won't go is when the battery is dead. This is the first consideration of quartz watch abrupt stop.

Damaged internal parts: Damaged quartz oscillator or faulty circuit board.

The watch has not been maintained for a long time: too much dirt inside the watch, jamming the gears, or making the battery in poor contact will cause the quartz watch to not go.

1.If it is a manual mechanical watch, the mechanical watch should be wound regularly, and it is recommended to wind the mechanical watch around 8 pm.

2.Automatic watches, such as insufficient arm movement, need to manually wind the watch, and the rotation of the crown needs to be controlled within 20 turns.

3.If an automatic watch has not been worn for more than 40 hours, it is necessary to turn the crown twenty times to activate the movement's drive system.

4.Regardless of the water resistance of the watch, it should be avoided as much as possible, and if it does, wipe it dry and make sure that the crown is locked at all times. It is best to replace the waterproof ring once a year.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

1.Insufficient power: mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of movement, and it can be directly manually wound to supplement the power.

2.No maintenance: mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear for a long time will produce iron filings, increase the friction between the gears, this kind of problem only needs to clean the movement, re-refueling.

3.Shock: A mechanical watch has a complex structure and is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop.

According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

4.Hairspring failure, hairspring failure is also one of the reasons for the mechanical watch steal stop, the above mentioned lack of power caused by steal stop, on the contrary, if the amount of exercise is too large, the clockwork is relatively tight and causes the failure of the upper bar mechanism, it will also cause insufficient power, this situation generally occurs at about 9 o'clock to 12 o'clock in the evening, at this time, the watch with calendar function turns the roulette wheel, which will lead to insufficient power calendar jam to stop the watch. This kind of technical failure also needs to be tested and repaired by a professional watch repair shop.

5.Watch magnetization: Watch magnetization is one of the common reasons for watches to slow down, even anti-magnetic watches can not be placed next to electrical appliances with magnetic fields, such as TVs, automatic mahjong machines, etc.

Because some of his parts are not anti-magnetic, they will still be magnetized over time. The watch is magnetized and needs to be demagnetized by a professional watch repair facility.

The reason why the watch stopped:

1. Mechanical watches, usually caused by the lack of power of the watch, you can fill the clockwork every morning, if you still keep stopping, it is recommended that you go to a professional maintenance point to let the master do a professional inspection.

2. Quartz watches are usually because the battery is about to run out, and it can be solved by replacing the battery.

Some large professional and regular watch repair shops can repair TAG Heuer watches, and there are also many professional and regular watch repair shops in Hangzhou, you can go to the city center to have a look, or look for a relatively large shopping mall, such as Vientiane City, Intime City, Joy City, etc., these places will basically have watch repair shops.

The cleaning and lubricating of watch movements, referred to as "oil washing", is a very important task in watch repair. The purpose of oil washing is to insist on the cleanliness of the watch parts and the necessary lubrication of the parts, so as to ensure the precision of the watch parts, improve the accuracy of the watch machine and extend the service life of the watch machine. Under normal circumstances, the general meter machine is used for two years and then the oil is washed once.

Under normal circumstances, the washing work is often carried out at the same time as the adjustment and repair of parts. In addition, while checking the failure of the meter machine, it is necessary to wash the oil of the meter machine when the following problems are found:

a. The lubricating oil in the movement is dry or sticky. This will increase the resistance of the movement of the mechanism, so that the watch machine is not accurate.

b. There is too much lubricating oil in the watch machine. This will cause oil to overflow everywhere and contaminate the parts, especially the escapement speed regulating mechanism, so that the watch machine will stop or be obviously inaccurate.

c. Foreign matter enters the movement, such as dust particles, metal particles, fiber fines, etc. This will cause the transmission mechanism of the meter machine to be blocked, so that the meter machine is not accurate or even stopped.

d. Rust of the parts.

If you have any problems with your watch, you can get it to Guangcheng Watch Store, Room 602, Block B, Yinyi Global Center, No. 42 Yaoxing Street, Haishu District, Ningbo City, and let the master help you test and repair it.

TAG Heuer can be repaired by a professional watch service center, and it is recommended that you bring your watch and the relevant ticket to a professional repair center for repair.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

TAG Heuer Watch Care Center: 400-659-0877 Common reasons for quartz watches to steal stops:

Insufficient power: When the quartz watch steals stop, the battery is insufficient, the voltage is unstable, and the power supply cannot be supplied normally, so it is often a sneak stop. It's time to replace the battery.

Poor contact: The circuit board and other parts of the quartz watch have poor contact, and the watch is also prone to steal stop.

Movement failure: When the movement has a gear train failure, the mechanical watch stops, and the mechanical watch has a coaxial phenomenon after the bearing is damaged, and the stop occurs.