How to find the exact location of a water pipe leaking in the ground? Thank you.

This requires professionals and tools, for example, the waterworks generally have a leakage worker, which is not possible for ordinary people, and other conventional methods are generally adopted, such as: close all water pipe inlets and outlets, and then pump up soap who applies it to the leakage of the pipe body to bubble.

Use an empty plastic pipe to insert it into the leak to listen to the sound of water, check one accurate, one of your own property experiences.

You can find someone from a professional water leakage detection company to find out the location of the water leakage, our family has also had this situation before, and then found a person from Guangzhou Xintan pipeline installation technology development **** to come and solve it. Very useful, years of problems were solved on the spot.

If you want to find a company that specializes in detecting water leakage in underground pipes to give you an answer, Zibo Guangbo is good at checking water leakage.

The method of leakage of buried water pipes is as follows:

1. Find out the water leakage point, only by finding the water leakage point in the first place, can the water leakage problem be fundamentally solved.

2. Knock out the floor tile cement, straighten out the pipeline, and predict the correct route excavation.

3. After finding the leakage point, repair the damaged water pipe, glue it with raw tape or glue, the damage is too big, and a new water pipe can be replaced. The use of water pipes that are not scalded but screwed is extremely unreliable, and the node joints should not be buried in the ground.

4. Re-bury the water pipes, build them, and sort out the garbage.

Listen to the leakage stick: By listening to the sound, you can make a basic judgment on the location of the water leakage, if the water leakage sound is loud, it means that the water leakage point is next to it;

2.Electronic leakage detector: Put this instrument on the ground to listen, if there is a loud water leakage in a certain area of the ground, it means that the water leakage is next to it;

3.Underground pipe leakage detector: Put this instrument on the ground of the buried pipe to measure the location of water leakage.

The first step is to determine the approximate location of the specific leakage in the water pipes in our home. Then the ground of the site should be removed, and the demolition area should be relatively large, so that we can repair the pipeline.

The second step is to locate the leaking pipe and find the specific leaking point. Then the part is cut open, wiped clean with a cloth, and later you can use a hot melt machine for hot melt connection. Because the water pipes in our homes are basically PPR pipes.

The third step is to suppress and confirm whether the pipeline we repair is qualified. When pressing, a manual pressure pump is also used for pressure, and the specific steps and operations of pressure are the same as above, at least to achieve. Until the suppression is qualified, the pipeline repair can be ensured, and then the ground can be restored.

Hope it helps, dear

The treatment method for water pipe leakage buried in the ground is as follows:

1. However, when the underground water is leaking, we must first check the strict and specific location of the leakage, so as to find the correct treatment method.

2. After finding the leakage point, judge the correct pipe location and start excavation, pry the tiles and cement open, and then find the leakage point to check the leakage.

3. If there is only a slight water leakage, you can use raw material tape or special repair glue to repair the water pipe, but this method is only a temporary treatment, and it will still leak after a long time. Or replace the old water pipe with a new one, and then replace it with a new fitting.

4. When connecting the water pipe, you must pay special attention to the connection of the water pipe, the connection of the water pipe must be in place, and after the water pipe is connected, you must do a pressure test to see if there is any water leakage, and after the pressure test, it is determined that there is no water leakage, and finally restore the original cement and ceramic tiles to their original state.

5. In the process of repairing water pipes, special attention must be paid to the selection of appropriate water pipes and glue, and special attention should be paid to the use of tools when digging cement and tiles, such as using percussion drills to avoid breaking the water pipes again with too much force, and pay attention to the strength of the construction surface, do not use the original soil, and re-stir the mortar to fill.

Detection method for water pipe leakage buried in the ground

You can use the valve bolt listening method, first block the water outlet, and then use the water pipe pressure measuring tool to inject pressure into the pipe, and then wait for half an hour to see if the pressure has become smaller, if the pressure drops, it means that there is a leakage in the water pipe, and then take the ground listening method, after determining the approximate location, use the electronic leak to listen to the leakage point, the louder the sound, the closer the leakage.

Usually, iron pipes are welded at the joints. Due to the weak corrosion resistance of weldments, they are prone to rust and water leakage. However, as long as the geothermal pipes are constructed in accordance with the official requirements, leaks can generally occur within 20 years, and leaks will occur under the action of water pressure, but this leakage is slow and generally occurs in bathrooms and kitchens.

It has strong corrosion resistance and excellent aging resistance. As long as the fitting is hot-melted, water leakage is usually rare. The construction in these places is carried out by relatively fixed personnel.

At this point, the water pipes will naturally age, becoming brittle and hard (iron pipes will rust and corrode). At this point, if the water pressure reaches a certain amount, the water pipe will burst; In these places, anti-seepage measures will be added during general construction, because the inner layer of this water pipe is stainless steel, and the outer layer is PVC material, while the plastic pipe is mainly because the construction process is not in place, and the hot melt joints are not completely hot melted together.

Now tap water leakage is relatively easy to find, the location is relatively fixed, and the service life of the water pipe has reached the limit value. The leakage of general households is mainly geothermal heating, which is laid by the developer himself, and the construction technology is difficult to guarantee.

Extended information: 1. The treatment methods for buried water pipe leakage are as follows:

1.Find the leak point. Only by identifying the water leakage point can we fundamentally solve the water leakage problem.

2.Knock off the floor tile cement, straighten out the pipeline, and correct the excavation route. 3.

When a leak is found, repair the damaged water pipe and glue it with raw tape or glue. If the damaged part is too large, replace the water pipe with a new one. The use of threaded locking instead of thermal connections is very unreliable, and the fitting should not be buried underground.

4.Rebury the pipes, cover them, and clean them up.

2. If a buried water pipe leaks, who knows what to do.

The water pipe buried in the ground of the house leaked, and the leak point was found. Only by identifying the leakage point can the water leakage problem be fundamentally solved. 2.

Knock off the floor tile cement, straighten out the pipeline, and correct the excavation route. 3.When a leak is found, repair the damaged water pipe and glue it with raw tape or glue.

If the damaged part is too large, replace the water pipe with a new one.

Summary. How to find the leakage of the buried water pipe accurately.

Hello, dear, glad for your problem we can use infrared detector to accurately find the location of the water pipe leakage.

You see my side explain like this, can you understand here? Can you give a thumbs up here?