What are the essentials of bathroom decoration tiling?

If the floor tiles are paved first, you must wait until the floor tiles are completely dry before you can paste the wall tiles, which greatly delays the construction period and affects the construction progress. If the floor tiles are not completely dry, stepping on them to pave the wall tiles can easily cause the floor tiles to be hollow, loose and uneven. It is worth noting here that the bottom row of bricks on the wall is pasted later, from the perspective of effectiveness, of course, it is more appropriate for the wall tiles to press the floor tiles, and the bottom row of bricks is actually a more reasonable construction method considered by the bricklayer master from the perspective of convenient construction and eating errors.

<> second is to ensure the quality of the tiles after the maintenance period, and then paste the wall tiles, which is not conducive to construction, and will cause pollution to the floor tiles and is difficult to remove. The third is that the construction period of the bathroom is extended, and the bricklayer causes stoppage and delay, and is unwilling to do loss-making business. After the floor tile is paved, a curing period is required, during which the ground shall not be moved around at any time, if the curing period is passed and then the wall tiles are paved, there is a break in the middle of the construction period, and the workers are unwilling, even if the curing period has passed, it is also necessary to avoid frequent ground movement and heavy object pressing.

So there is no doubt that the wall tiles are laid first and then the floor tiles. It should also follow the principle of the bottom support side, on the wall and floor tiles is the wall pressing the ground, now many construction personnel or companies are the bottom pressure side is not right, whether the owner mentions it or not, it should be the wall to the ground! The advantage of this is that when the wall is bathed and drenched, or when the pipe of the hanging shed layer bursts or a large amount of water runs, the water line is discharged to the floor drain.

The water on the ground will not leak back into the floor tile joint layer and the floor slab layer, causing flooding, and the residents on the lower floor will also directly protect the service life of the floor tile layer and the waterproof layer.

Apply caulk and wipe clean with a damp towel. Well, a clean and tidy bathroom immediately appeared in front of you. The above are general operating procedures, and special circumstances and different habits of each person are beyond the scope of today's discussion.

The bathroom tiles are first pasted with wall tiles and floor tiles, so that the construction personnel can operate in the room; But the wall tiles must fall on the floor tiles, so that there is a use of waterproof penetration. Every industry has experience and practices, and decoration is no exception.

Bathroom decoration tiles, you need to master these essentials: 1The choice of ceramic tiles should be particular, because the bathroom is relatively humid and the frequency of use is high, so it is generally necessary to choose tiles with low water absorption, which are non-slip, moisture-proof, dirt-resistant and wear-resistant; 2.

Before paving, the plan should be made, try not to appear less than one-third of the narrow column, after the tile is cut, it is advisable to leave more than two-thirds; 3.Before tiling, the wall should be cleaned first; 4.Before tiling, waterproof and expansion joints should be reserved to prevent easy expansion and extrusion when exposed to water, which will cause the tile to fall off.

Pay attention to the tiles in the bathroom: 1. Brush the wall and wet the wall with water, but not too much water; 2. The tiles should be soaked in water; 3. Note that the specific gravity of cement and sand in the mortar is different, and the cement ratio in the mortar on the wall is higher; 4. There should be a certain gap between the tiles to avoid bulging and cracking; 5. Choose the color of the tile according to the lighting situation of the bathroom; 6. Do a good job of waterproofing before pasting magnets.

You have to be on site, otherwise the workers won't waste too many tiles. If you don't apply tiles on site, it's easy to run into those irresponsible plasterers and you'll waste a lot of bricks. It is suggested that some imperfect tiles can be pasted by workers in invisible locations in the future, such as washbasins, cabinets, mirrors, etc., and should also be careful that tiles and waist tiles should not be pasted in the above positions, otherwise you will not be able to see anything in the future, but also spend money

Before tiling, the rougher the wall, the better, which can increase the contact force area between the cement and the wall. The specific method is to drill more holes in the wall with an electric drill, the more the better. The tile must require the tile to pull the line, and supplemented by a level, no matter how good the tile blowing technique is, how good it feels, it is recommended that you insist that he use tools to control the quality.

Generally speaking, cement mortar can be used for load-bearing walls, but kitchen flues, bathroom air ducts, kitchen and bathroom packaging pipe wall tiles must be added to cement mortar with 108 glue to increase viscosity. When decorating the company's ceramic tiles, the tile union will hold a large core board ruler for you to inspect, accept, in fact, this thing is not standard for grinding several times, so you can't take that to check the quality of the tiles, you must use a level or aluminum alloy as a ruler to check. The floor and walls of the bathroom are tiles, and when matching the bathroom walls and floor tiles, you should achieve a "deep wall and light light" color matching, avoiding light ground color and dark wall color - it will make people feel top-heavy; If you don't know how to match the color of the bathroom tiles, you can try a combination of gray on the floor and white on the wall.

The effect is versatile and durable, and it is a good choice.

As a damp space in the bathroom, it is recommended to choose matte tiles with good non-slip effect as the floor of the bathroom, especially the shower room. When cooled, the floor is filled with water. If you use floor tiles that are too smooth, it is easy to slip and fall.

It is very necessary to avoid slipping and ensure the safety of the family! The joints of the bathroom tiles should not be too small. Tile joints that are too small can easily reduce the service life of tiles.

The tile extrudes the glaze after thermal expansion and cold contraction. The bathroom tiling is very exquisite.

Nowadays many workers start to hook the seams immediately after the bathroom tiles are laid, which is very inappropriate. Since the tile is not completely dry, it is easy to loosen the tile in the process of hooking, which will cause the tile to fall off in the later stage, leaving a potential safety hazard. The bathroom tile laying is very exquisite, and 10 precautions can not be careless.

After the tile is dry, the tile grout is carried out. Generally any time after 24 hours. When some irresponsible construction teams lay wall tiles, scrape putty wall tiles on the wall, and do not shovel putty directly bricks, this safety risk is very large, because the cement is strong, the putty can not hang cement, and it is easy to cause the tiles to fall off.

It's also not safe!

Be sure to pay attention to the quality of the tile, pay attention to the height of the tile, pay attention to the firmness of the tile, pay attention to the tile gap should not be too small, and pay attention to frequent soaking.

It is necessary to pay attention to the problem of waterproofing, and do a good job of waterproofing before laying bricks, so as to avoid water seepage and leakage, and the gap should not be too small, otherwise it is easy to destroy the tiles, which can shorten the service life of the tiles.

In the early stage, we must do a good job of waterproofing, the floor tiles must have an inclination, do not leave too large gaps, you need to soak in water before pasting tiles, and you need to scrape off the previous putty before pasting tiles.

Pay attention to the combination of deep and shallow walls, do not spread tiles to the ceiling, non-slip floor tiles, layout floor tiles in advance, and make grooves for the ground.

Nowadays, the tiles we use have different brands, different quality and **, and sometimes I don't know how to choose. Generally, people have certain requirements for the implementation of floor tiles, but there are also requirements for the implementation of wall parts, so today we will introduce someBathroom wall tile laying skillsLet's take a look.

1. Choose tiles with low water absorption. In general, tiles with less water absorption are of higher quality, so wet bathrooms can dry quickly.

2. Choose tiles with high texture density: When choosing tiles with higher texture, consumers can see whether the surface of the tiles is smooth and flat from the side of the tiles to see if there are pinholes with uneven thickness; In order to determine whether the sound of the tile is crisp, the crisp box indicates that the tile has high density and good hardness; Tiles are not only easy to maintain, but also less prone to damage.

3. Choose the anti-slip texture of the tile: the ceramic tile on the market is a matte surface and a shallow concave and convex shape, which is characterized by non-slip, of course, this kind of tile has certain requirements when laying, so it is necessary to have a good implementation team, do the work carefully, which requires everyone to often supervise the work, what is not good to complete in time, to avoid a bad situation in the future.

4. Choose tiles of different colors in the dry and wet areas: In foreign bathroom decoration, it is common to distinguish the dry and wet areas of various colors to achieve good segmentation and avoid splashing and splashing.

5. Caulking problem: Many workers now start to pave tiles and immediately sew them, which is not suitable. Because the tiles are not completely dry, it is easy to loosen the tiles during the paving process. In the later stage, it will be found that the tiles are falling off and loose, causing potential safety hazards.

The above is:Bathroom wall tile laying skillsYou can get it for free

When you decorate the bathroom, you will pay attention to the waterproofing of the bathroom. Therefore, many homeowners will tile the bathroom. So how should bathroom tiles be pasted? What are the processes for laying tiles? Next, I will briefly introduce it to you.

1. We need to do a good job of waterproof treatment of the bathroom before paving the tiles, and it is best to do a closed water test before paving the tiles. After making sure that there is no problem with the waterproofing of the waterproof bathroom, we clean the walls and floor base and moisten it with water in advance. The tiles need to be soaked in the shade to dry, and generally soak for 30 minutes.

2. Next, we determine the paving plan of the tile, after the cement mortar is adjusted, the slurry is smeared on the surface of the base with a scraper, and then the tile is paved on it, and the tile is patted with a rubber hammer. When laying tiles, it is necessary to keep millimeters of tile gap between the tiles, and a cross positioning frame can be used to provide the accuracy of the tile gap.

3. The bathroom is usually paved with wall tiles before paving floor tiles, and the height of wall tiles needs to be about 10 cm higher than the bathroom ceiling. When we lay tiles, the texture of the tiles should be aligned. When laying floor tiles, the slope of the bathroom floor needs to be inclined to the floor drain opening.

If ordinary tiles encounter bathroom pipelines, switches and other equipment, they need to be cut with whole bricks.

4. After the tile is paved for 2-3 hours, we can use the empty drum hammer to beat the tiles piece by piece, check whether the tiles are hollow, and if there is a hollow drum, we need to rework in time. We need to wait until the tiles have dried 24 hours before we can grout. It should be noted that after the floor tiles are paved, you need to wait until the ground is dry before you can walk and carry out the next decoration project.

Summary: About how to paste bathroom tiles, it is briefly introduced here. I hope that after reading this article, you will be able to understand this. After the bathroom tiles are paved, we must do a good job of inspection and try to avoid the situation of tile hollowing.

When the bathroom is decorated, the wall needs to be tiled, because the bathroom is relatively humid and often uses water. Therefore, wall tiles can effectively prevent waterproof and moisture. But do we know how to paste the wall tiles in the bathroom, we know that this is also particular, what matters to pay attention to when pasting the wall tiles, these problems need us to understand, let's see.

When the bathroom is decorated, the wall needs to be tiled, because the bathroom is relatively humid and often uses water. Therefore, wall tiles can effectively prevent waterproof and moisture. But do we know how to paste the wall tiles in the bathroom, we know that this is also particular, what matters to pay attention to when pasting the wall tiles, these problems need us to understand, let's see.

How to paste bathroom wall tiles?

1. There is a traditional paving method: in fact, the straight line laying method is primitive and a traditional method. This method can be described as a classic, and it has been passed down to the present day, and I believe that it will still be maintained in the future.

The advantages of this method are: generous, decent, neat, and simple. Let the appreciator feel the strong texture of the floor tiles.

I-shape: The next step is to lay the floor tiles with a slightly more pulsating method. It is also a slight change from the traditional pattern. It is not laid in a straight line according to the traditional method, but modified into an I-shape, which is usually referred to as the I-shaped paving method.

2. There is a dislocation method: If you don't accept the traditional one, this I-shaped laying method feels okay, and it is not a hundred percent, so let's combine the two together to see if there can be a fresher approach. That's right, it's this kind of misalignment that is not right or straight.

Since it is quite jumpy, it is necessary to anticipate it before using it.

What are the precautions for tiling in the bathroom?

1. Pay attention to the spacing of tiles and the gap between tile particles, and after each tile is pasted, make sure that each place is compacted and fully combined with the adhesive. After about 30 minutes, the tiles can be soaked with a sponge or other brushing tools, and the paper can be soaked for about 5 minutes.

2. Before paving, use tile adhesive or white cement to plaster thinly once, and ensure that the surface of the substrate is flat, and then paste the mesh tiles on the wall, ground or countertop. When paving, pay attention to the consistency of the tile spacing and the gap between the tile particles, and each tile is neatly paved in the direction of the arrow marked on the back paper, and patted firmly with caulking. Because the tile pays attention to the use of color, the collage work must meet certain requirements.

3. There shall be no skewed, warped, hollow drum and other phenomena. The second wall skirt is allowed to be 2mm after the upper mouth is straight, and the surface of the tile should be neat, uniform color, tight caulking, and consistent depth, and there should be no alkali, stains, mortar flow marks, etc.

The above we introduce to you is about how to paste the bathroom wall tiles and the relevant issues related to the precautions for the bathroom tiles, the bathroom is necessary to paste the wall tiles, which can not only be beautiful, but also can be effectively waterproof and moisture-proof. Above we have introduced some methods and precautions about paving, which you can use as a reference.