Hexagonal three dimensional lantern making method, round lantern making method

Hexagonal three-dimensional lantern production method, hexagonal three-dimensional lantern production method is very good to do, make six corners, three-dimensional six corners are made after the hexagonal three-dimensional lantern is made, very easy to do.

Here's how to make a round lantern:

1. Prepare a red envelope, red needle and thread, and 1 piece of red rectangular paper; Use scissors to cut out red packets, the width of each one should be the same, and then cut out the vertical strips with patterns on both sides and throw them away, leaving a total of 12 vertical strips for later use.

2. Cut out the vertical strip of red rectangular paper, pay attention not to cut the top, and then roll up the cut rectangle, and the ear head is ready; Thread the tassel head with red thread and tie a knot at the top of about 4 cm to secure the lantern strip; Thread the 12 lantern strips in turn, tie the patterned side up and tie a knot at the top; Thread the lantern strips in turn with red threads, press them into a semicircle, and tie a knot at the top to fix them.

Thread the remaining red thread through the top lantern strip, leave about 10 cm of hanging thread on the lantern, tie the knot, and cut off the excess length, and the round lantern is ready.

Handmade round lantern practice 2:

1. First of all, we need to prepare the materials for making the lantern: paper cups, red threads, glue or double-sided tape, coloring pens or gouache and scissors.

2. Take out a prepared paper cup, and then use scissors to cut the paper cup evenly into strips of consistent size along the mouth to the bottom.

3. After cutting longitudinally, trim the edge of the cup mouth to ensure neatness and conciseness.

4. You can trim the strips of the cup body to ensure that the width of the strips is consistent, and try to cut the smooth and rectangular edge.

5. After pruning, bend the vertical strips to the inside one by one, and initially show the shape of the lantern.

6. Then, take out the other prepared paper cup and cut out the mouth part, leaving only the bottom of the cup about 2 cm.

7. Cut out uniform and firm strips of the same size from the bottom of the retained cup according to the cutting method of the previous paper cup.

8. At the bottom of the two paper cups, drill a small hole respectively and thread it with red thread.

9. Then glue the vertical strips of the two paper cups one by one, after the bonding is completed, the lantern is almost formed, and you can also use your creativity to add some other decorations.

Here's how to make a hexagonal lantern:

1. Take a piece of paper.

2. Cut in half.

3. Fold left and right, up and down.

4. The corners are aligned and folded with the horizontal centerline, a total of 6 folds.

5. Connect two propylene with double-sided tape. It's so rough.

6. Use the red thread to stir up the tassel and lantern connection stool, and then it is finished!

Chinese lanterns, also collectively known as lanterns, are an ancient traditional handicraft of the Han nationality. After thousands of years of development, lanterns have developed different regional styles, each with a unique artistic expression. Every year around the Lantern Festival on the 15th day of the first lunar month, people hang red lanterns symbolizing the meaning of reunion to create a festive atmosphere.

The lantern combines painting, paper cutting, paper tie, piercing and other crafts, and is closely related to the life of the Chinese. The lantern has become a symbol of Chinese festivities. Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed.

Lanterns are an important part of the traditional culture of China's friendship bureau, whether in the old times or now, hand-tied lanterns not only set off the festive atmosphere of the festival, but also give people more inspiration to pray for blessings, and place people's good expectations for health, peace and longevity.

Chinese lanterns are a combination of painting art, paper-cutting, paper tieing, stitching and other crafts, and among the lanterns made in ancient China, the palace lantern and yarn lantern are the most famous. Lanterns are closely related to the life of Chinese, and there are lanterns everywhere in temples and living rooms.

Carefully calculated, there were lamps in China after the Qin and Han dynasties, and paper lanterns were after the invention of paper in the Eastern Han Dynasty.

Prepare a pair of lanterns and place them in a neat and uncluttered place ready to start installing.

Next, remove the packaging of the lantern, and place the main body of the lantern and the upper and lower seats separately to facilitate the neatness and convenience of installation.

Next, round the main body of the lantern. The main body of the lantern is very elastic, so it is necessary to round it and hang the hook inside the lantern, there are two hooks inside the lantern, and both will be balanced when both are hung well, the method is to round the main body of the lantern and use the upper hook to hang the lower hook. As shown in Fig.

After the hook inside the lantern is hung, the lantern becomes rounded, as shown below. But it's not nice to have an upper and lower base, so it's time to start installing the base of the lantern.

Install the lower base of the lantern first, the lower base of the lantern has a yellow tassel, and the upper base does not, so it is easy to distinguish, as shown in the figure, the mouth of the lower base, after aligning the Yusun card on the lantern, and then rotate, the lower base is installed. Pay attention to the font on the lower base of the lantern and do not put it down.

<> mount the base. When installing on the base, pay attention to the square of the font without skin direction and do not install it, and the installation method is also the first match, and then rotate in place.

When hanging, you can use a rope to hang it as soon as you tie it. Pack one and the other in the same way. To install the lights inside, you need to pull the cable to buy the lamp port and bulb.

The hexagonal lantern installation method is as follows:

Ideation and creativity.

The selection of the overall theme can involve all aspects, should not be limited to one aspect, to use imagination, it is best to have a story, a source, and an interest. The theme we have chosen here is "City Memory", that is, the overall effect of the lanterns should evoke the viewer's impression or memory of the city of Zigong.

Skeleton making. The skeleton production of lanterns needs to follow certain principles: it can be light, it can be sparse, and the shape is accurate.

The type of lantern we chose was a more basic hexagonal lantern, so the most important thing in the production of the skeleton was to connect the long and short wooden sticks together with a card slot. In this process, in addition to wooden sticks, glue and small hammers are used.

Cloth lamp process, electronic lamp installation.

After the skeleton is completed, after the inspection does not need to make major adjustments, you can consider installing lamps and lanterns, remember not to mount the lamps and lanterns after plastering, the principle of cloth lamps is roughly the following: uniform light, color system.

1. Do not seek strong light, moderate position, and eliminate vignetting.

The lantern we make is a basic model, and only one lamp needs to be installed at the bottom of the lantern, so the main thing to pay attention to is the appropriate position and eliminate the dark corner. We put a sponge glue on the beam at the bottom of the lantern, and then fixed the small lamp in a suitable position at the bottom and turned on the lamp for inspection.

Laminating process, yellow paper paste.

There are a variety of materials for pasting, such as paper, silk, colored cloth, etc., and the key thing we need to pay attention to when choosing is the degree of light transmittance of the material. It's too thin, and the lamps inside are visible; It's too dense, and the light from the lamp can't be seen. Therefore, if you are making a lantern with multiple lamps, you need to adjust the sparseness of the pasting material in a timely manner according to the intensity of the light.

Because there is only one lamp and the distance between the six sides and the lamp source is equal, our lantern uses yellow paper material with uniform sparseness. When pasting, we pay more attention to the cutting of the yellow paper, as much as possible to make the size of the lamp paper just right, the lines of the lamp paper are smooth and soft, giving people a sense of beauty.

DIY hexagonal lantern pattern.

Decoration is the last step in the production of lanterns, mainly to achieve the effect of icing on the cake and sublimating the theme. According to different creative needs, we can use a variety of arts to embellish places with too much white space, such as pasting paper-cutting, painting landscapes, writing calligraphy, coloring, etc. What needs to be paid attention to here is the attack on the cavity, and some decorative string lights can not be too much, so as not to rob the color of the lantern itself.

Presentation of achievements. <>

In terms of content design, the Zigong Lantern Festival selects the local "Big Three Uniques" (Jingyan, Dinosaur Lantern Festival) and "Little Three Uniques" (paper-cutting, tie-dyeing, Gong Fan) almost every year, and organically integrates them into the lantern group, especially the dinosaur lantern group, which also represents the characteristics of the Zigong Lantern Festival.

How to make a pentagram lantern:

The two pentagram bamboo rows that have been placed are glued and formed, and after the two pentagram stars are glued and trembling respectively, continue to use hot melt adhesive to glue the five vertices of the two pentagrams.

The glue bond alone is not particularly strong, and we have to continue to use the Dongyuan wire to connect the apex of the pentagram, and the wire binding. Cut the disposable chopsticks into 4cm wide, a total of 5 chopsticks. Use hot melt glue to glue the truncated chopsticks and glue them to the node position between the two pentagrams.

Preliminarily finished DIY five-pointed star lantern basic frame.

Next, prepare a small platform for placing candles, use the remaining bamboo strips to make a pair of beams with hot melt glue in the middle of the frame of the five-pointed star lantern, and place the candles in an aluminum foil dish to fix them in the middle of the lantern. If you want to hang the lantern, continue to make a wire hook at the apex of the pentagram at the top of the lantern as shown in the picture.

Paste on the surface with rice paper. There is an entrance left on the side of the lantern, which is used to light candles and ventilate.

Origin of the lantern:

The origin of lanterns is that the use of lanterns was recorded as early as the Tang Dynasty in the eighth century. The existence of lamps in China was after the Qin and Han dynasties, and the existence of paper lanterns may have been after the invention of paper in the Western Han Dynasty.

The custom of watching lanterns during the Lantern Festival originated in the early years of the Han Dynasty, but it is also said that the Tang Ming Emperor in the Lantern Festival in Shangyang Palace Chen Lantern Shadow, in order to celebrate the peace of the country, only to tie the lanterns, by the flickering lights, symbolizing "the source of the code color dragon Zhaoxiang, the people are rich and the country is strong", the atmosphere of the lanterns is still widely popular today.

1. First of all, prepare some cardboard, you can also use gouache paper and other harder paper. The paper is cut into a pentagonal sail with a carving knife, and the size can be customized.

2. There are prepared pentagonal papers, know that the writing paper can be color, or monochrome, and the pattern can be drawn or printed according to the need.

3. Then use a paintbrush to connect the different corners together with lines.

4. Then fold the corners to the corresponding horizontal line.

5. The remaining 4 corners are also operated in the same way, and when the song is closed, a five-pointed star will appear.

6. A total of 10 or 11 such pentagonal structures need to be made.

7. Place the two pentagons together. The two pentagons were then glued with a crack glue and pinned together.

8. Connect 5 pentagons. At this time, a circle of pentagons is added on this basis, and the glue is also used to paste firmly.

9. At this time, you can put the candlestick in the small cup in the paper lantern.

Lantern is an indispensable festival element of the Lantern Festival, in fact, the types and patterns of Lantern Festival lanterns are varied, let me teach you to make a simple and easy-to-do exquisite octagonal Lantern Festival lantern, I hope you like it

Preparation materials: six pieces of square colored paper, double-sided tape, rope, disposable chopsticks.

Steps: <>

Step 2: Fold the four corners towards the center point, if you are using single-sided paper, now it should be white side towards you.

Step 3: Fold all six cards like this.

Step 4: The painted part is glued, and the northeast large flower part is the glue place.

<>Step 6: Connect the four together.

Step 7: Glue the painted part.

Step 8: Connect the leftmost triangle with the rightmost one.

Step 9: Take out another folded sheet and open it, paste the glue at the four corners, and stick the corresponding one on the bottom.

Step 10: Take out the last folded one, thread a string and tie it in a knot at the back.

Step 11: Turn it over and cover the four corners with glue.

Step 12: Glue to the top as before.

Step 13: Tie the rope to the disposable chopsticks, and the Dragon Boat Festival lantern is complete.