How to make a sofa cover, how to make a sofa cover?

As far as comfort is concerned, of course, the fabric is better and the pattern is more The disadvantage of the fabric is that it is not resistant to dirt and it is not easy to take care of when it is dirty, but there are high-tech new materials The kind of nano material does not stick to the water Drink and dander dust are also easy to take care of, but **Expensive leather sofa Comfort is almost But not afraid of dirty Good to clean **Expensive or you buy a fabric sofa of similar price Although it is troublesome to clean up, but after a few years, find a tailor to change the fabric It will become a new sofa.

Steps: 1. To prepare for production, the first thing is to prepare the tools, rulers, scissors, and sewing machines for production.

2. Measurement and planning, first measure the size of the part, the front, side, top, bottom, back of the length and width, plus 1 inch after cutting, both sides to remove the seam size is basically almost appropriate, there are inappropriate places to change at any time, especially the corners of the curvature, the need to pay attention to the place is to cut a little more, to the seam is easy to rework and change.

3. Measure the length of the sofa again: measure the length of the armrest (from the ground on the outside of the armrest to the inner cushion) *2 + the length of the middle cushion + the width required to stuff it into the cushion. Spread the appropriate length of cloth on the sofa.

Generally, the cloth required for a single sofa is about: length 230cm, width 235cm; The cloth required for the two-seater sofa is about: length 300cm, width 235cm; The cloth required for the three-seater sofa is about:

It is 470 cm long and 35 cm wide.

4. Stuff the cloth into the chair seam according to the shape of the sofa, and use stationery clips or long rulers and plastic pipes to stuff into the chair seams to play a fixed role and prevent sliding loose. You can make some skirts appropriately, which looks more comfortable and has a rustic style.

5. Straighten the fabric at the back turn of the sofa and the armrests and fix it with pins. It can also be sewn together with a needle and thread.

6. Bow or other decorations can be pinned at the fixed place of the pin to increase the beauty.

Method: Choose the fabric and style, measure the size, and finally sew.

First of all, design the style and color of your own sofa cover. It is best to make it yourself, and it is not easy to do it at home with a simple and complex style, and it is too much to test the craftsmanship, and it is generally not good to do it without a sewing foundation.

Then buy the fabric you need and cut it in pieces according to the fabric. Such as backrests, cushions, armrests, etc. It's best to make it so on its own.

Then sew the different parts of the fabric together. You can also decorate yourself with some lace and lace. In this way, the simplest sofa cover is complete.

The two of them work together to cover the fabric in different parts, according to the arc of each part of the sofa, after reserving the edge for sewing, you can leave more points to prevent the cutting from not being in place, you can sew it in if you leave more, and the sofa cover that is sewn out will be pulled away, and the fabrics of various shapes will be cut out one part and one part, and finally sewn together.

The steps on how to make a sofa cover are as follows:Material preparation: cloth, needle, Fu Min friend thread, pen, paper, ruler.

Operation steps: 1. Drawing, three-dimensional plane can be, calculate how many sides the sofa needs in total, wrap the sofa with a cover and a sleeve, in fact, a stitch is not sewn to take the drawbacks, only need to measure the size of the cloth directly spread on the sofa, and press it into it on the side.

2. Measure the size of the cloth and cut it according to your needs, two are for the sofa, and two small are for the side skirt.

3. Next, do the edge first, because the hand sewing hurts, so choose this kind of less wrinkles (what is this called the edge) I want to do ruffles, but the cloth is not enough, a pleat will be about 10cm more, if the cloth is enough, the long ruffles are also good-looking, and it is better to have a sewing machine.

<>4. Two pieces of cloth are sewn on the opposite side, sewn on the opposite side, and then fold it over in the absence of Huai.

<>5. A whole piece of cloth is laid first, and then the edge is spliced and sewn with a flat needle.

The sofa cover making tutorial is as follows:

Prepare a large piece of non-woven fabric, lay it flat on the sofa, fix the non-woven fabric in place with a pin, and mark the cutting line on it with a pencil. Non-woven fabrics are basically sold in rolls, but it can be stored for a long time, and it is often used in home DIY, so it doesn't matter if you buy more.

Cut it with scissors where the cutting line is marked. Prepare a long strip of red cloth and thicker rope, wrap the rope with the strip of cloth, and sew it up. It is important to wrap the rope tightly before sewing.

Stitching of red polka dot fabric and lace. It is worth noting that the rope wrapped in red cloth is the position of the edge of the sofa.

Sew the cut non-woven fabric and the sewn lace dot fabric together, and cut some small lace at the corner to beautify it. In this way, the side of the sofa cover is completed, and the side, front and back of the other sock can be completed in the same steps as above.

Remember to sew the place with the fabric that has been sewn lace, the lace does not need to be repeated!Sew each part together so that the rudiments of the fabric cover come out, and at the end you can decorate it with a pleated lace from the leftover red strips of cloth.

There are two main types of sofas: classical and modern. Guess the classical sofa generally adopts some traditional modeling elements and uses the traditional process structure, so the structure is more complex. The exposed parts of this type of sofa are often carved, inlayed, depicted, painted, etc.

Nowadays, many people like to make sofa covers by themselves, wrapping a layer of cloth cover on the sofa, which is a manifestation of advocating a better life - it is not only easy to clean, but the appearance can be changed at will. When you make a sofa cover by yourself, don't you feel a sense of accomplishment? Let's take a look at itMake your own sofa coversHow to make your own sofa cover:

1. First of all, you must prepare the tools. For example, rulers, scissors, pins, threads of various colors, needles for sewing clothes, it is best to have a sewing machine, otherwise you will be tired. There is also a water-soluble pen, which is used for marking, and it doesn't matter if it is written on the cloth, the word will disappear when it encounters water, which is particularly easy to use.

2. Measure the size of your sofa. Larger sofas are usually divided into three parts: backrest, sofa armrests, and sofa base. Use a tape measure to measure each part of the sofa.

The measured size is recorded on the paper, and each size should be added by another 5 cm, because the sewing should be sewn (or edging), so be sure to remember to add an extra 5 centimeters to attack the Huimi. Personally, I think that if I am not sure about myself, I will divide the sofa into several large pieces to sew, so that the sewing will be more accurate, especially if the sofa shape is more special, it is necessary to sew more pieces.

3. According to the measured size, cut the fabric with scissors, and then use a marker pen to mark the fabric of each part of the Zen Zhi in turn; (Remember to add an extra five centimeters), after the pieces are cut, mark them with a water-soluble pen to avoid messing up.

4. The next step is to sew, sew each piece of fabric with a needle and thread, and then lock the edge (or wrap the edge) of each piece of cloth. When you sew it up at the end, just hide the thread ball inside.

5. Continue to finish the remaining few. Here I would like to explain that the sofa cover I made this time does not have a zipper. Usually when I put on a sofa cover, I always feel that it is difficult to get it, squeeze and press, and it takes half a day to stuff it in, I believe many people will feel the same way.

So I left the cloth a little longer underneath and put a hook and loop on the back. Or you can nail a snap button. This way, it will be easy to put on the sofa cover.

If you have a friend who wants to wrap the whole sofa, you can separate the backrest part from the sitting part, and sew the hook and loop at the connection between the backrest and the seat, so that it is also easy to disassemble and wash.

6. Finally, install hook and loop straps on the sofa. In order to make the new sofa cover cloth not shift during use, the hook and loop straps are installed in several parts of the sofa - between the base and the cushion, and between the backrest and the cushion, mainly for fixing.

The above is a detailed answer to how to make your own sofa cover and how to make your own sofa cover, I don't know if you are satisfied with our introduction.