What is diamond skin? What is the difference between adamantine leather and cow leather

Many friends will say: no crack, no diamond, yes, 80-90% of diamond will crack, most of them are vertical cracks, both the upper orifice valve scars are cracked, and the other is transverse cracks, which are mostly produced in the places where King Kong lacks meat, with the trend of lack of meat and skin cracking, many friends have tried a lot of methods, what to use egg white.

Coated、Wet with water and put in the refrigerator for refrigeration, etc., due to Vajra Bodhi。

The semi-wooden material, even if it is repaired, will reappear in the later stage, so the following shares the cracking prevention and repair of Vajra Bodhi.

1. Causes of cracking.

Vajra Bodhi cracking is mostly caused by the ambient temperature difference and its own water loss, Nepal.

A year is generally two seasons, winter October to March of the following year, into April is the summer of high temperature and rain, high temperature and high humidity, sufficient rainfall, and just in March and April every year, Nepal Jingang has just started to lay down the tree, so during this period of transportation to China in Nepal, the temperature and humidity are relatively high, coupled with the outer peel and pulp of King Kong, there is generally very little cracking, but after cleaning, the environment of the players is different, the cleaning and maintenance methods are different, and the cracking situation begins to occur. There is also the saying that there is no crack and no vajra.

2. Prevention of cracking.

Some people say that this is too much, friends who have this point of view, please turn a blind eye, and stop here.

The following is to say the precautions, after the new King Kong arrives, the use of dry brush or water cleaning can be, the tool can be used with stainless steel wire brush and needle or double-ended crochet needle, clean or clean 70 80% or more, the rest of the pulp remains, in the future of the plate brush process will naturally fall off, after the cleaning of the King Kong Bodhi, direct contact with the ambient temperature and rapid water loss at this time, please get on the hand plate in time, rarely see the wind, indoor multi-plate, get up early in the morning do not panic to wash your face, the King Kong Bodhi on the face and head walk again, Then go over again, brush with a harder bristle brush, it is best to use the super hard bristle brush of wild boar bristles, the position of the brush is mainly based on the direction of the valve marks and some lack of meat, after the plate brush, you can choose to use the more avant-garde pure plant water-soluble diamond anti-cracking solution to coat it again, brush to semi-dry and put it into a sealed bag, take it out when you have time, and brush it out every time you put it into the bag, apply a little diamond anti-cracking liquid brush to semi-dry storage, this operation lasts 7-10 days, and King Kong Bodhi greatly reduces the occurrence of cracking.

Dermis. The genuine leather is made of animal skin, which has good air permeability. The genuine leather on the market is generally divided into three types: the first layer of cowhide, the second layer of cowhide, and synthetic leather.

The ** of the three skins decreases sequentially. The first layer of cowhide is a relatively good fabric, which retains the breathable and durable characteristics of cowhide. The two-layer cowhide is made of cowhide leftovers and added PU to re-laminate, also known as film cowhide, compared to the second-layer cowhide, the first is cheaper, and the utilization rate is higher.

The differences between adamantium leather and cowhide are as follows:

Cow leather is made of cow raw leather through dehairing and tanning and other processes have been denatured and non-perishable leather, the leather surface is fine, the strength is high, the most suitable for making leather shoes; Vajra leather belongs to a kind of artificial leather, the pores on the surface of this leather are round and coarse, and the more oblique protrudes into the leather, the pores are arranged in a group of three, and the leather surface presents many small triangular patterns.

1. Cow leather is a leather that has been denatured and not perishable by removing and tanning raw cow hide. Cow leather can be divided into the first layer of leather and the second layer of leather according to the layer, and it takes dozens of processes to make the finished leather.

Second, the difference between cowhide and cowhide:

1. Cowhide refers to the skin on the cow's body, and the most superficial layer of skin is the layer of skin covered under the hair.

2. Cowhide refers to the use of raw cowhide after tanning, anti-corrosion and other processing into leather products of materials.

Types of leather: Different types of leather have different characteristics and uses. For example, cowhide has a thin surface and high strength, which is the most suitable for making leather shoes; Lambskin is light, thin and soft, making it an ideal fabric for leather garments; The breathability and water vapor permeability of pig leather are better.

Pig leather: The pores on the surface of the leather are round and coarse, and the more oblique ones protrude into the leather. The pores are arranged in groups of three, and the leather surface presents many small triangular patterns.

1. Cow leather: Cattle leather and buffalo leather are both called cow leather, but there are certain differences between the two. The pores on the surface of the cow leather are round, stretching straight into the leather, the pores are tight and even, and the arrangement is irregular, as if the sky is full of stars.

The pores on the surface of buffalo leather are larger than that of cattle leather, the number of pores is rarer than that of cattle leather, and the leather is looser, which is not as fine and plump as cattle leather.

2. Horse leather: The hair on the surface of the leather is also oval, slightly larger than the pores of cattle leather, and the arrangement is more regular.

3. Sheep leather: The pores of the leather grain surface are flat and round, the pores are clear, and several are grouped and arranged in the shape of fish scales.

Summary. Hello dear, Vajra skin is the skin color of Vajra Bodhi, and there are four skin colors of Vajra Bodhi: gray, white, yellow, and red. The color of the red-skinned Vajra Bodhi plate is dark red and the luster is dull, and the yellow Bodhi plate is bright and dazzling with a sense of luster.

When playing with the Vajra Bodhi bracelet, keep your hands clean so that the color of the Bodhi does not become dull or cracked. Vajra skin is the skin color of Vajra Bodhi, and the skin color of Vajra Bodhi is generally divided into four types, namely gray skin, white skin, red skin and yellow skin, yellow skin can be subdivided into turmeric skin and yellow skin, and red skin can be subdivided into purple red skin, white skin and gray skin.

Hello dear, for you to find out: diamond leather is made of leather material, the leather is made of animal leather, and the air permeability is good.

Hello dear, Vajra skin is the skin color of Vajra Bodhi, and there are four skin colors of Vajra Bodhi: gray, white, yellow, and red. The color of the red-skinned Vajra Bodhi plate is dark red and the luster is dull, and the yellow Bodhi plate is bright and dazzling with a sense of luster. When playing with the Vajra Bodhi bracelet, keep your hands clean so that the color of the Bodhi does not become dull or cracked.

Vajra skin is the skin color of Vajra Bodhi, and the skin color of Vajra Bodhi is generally divided into four types, namely gray skin, white skin, red rolling and yellow skin, yellow skin can be subdivided into turmeric skin and yellow skin, red skin can be subdivided into purple and red skin, white skin and gray skin, etc.

Diamond plate is a composite material that covers composite materials.

Diamond board is a common name for laminate flooring, and its standard name is impregnated paper laminated wood flooring. The diamond plate is generally composed of four layers of materials, namely the wear-resistant layer, the decorative layer, the high-density substrate layer, and the balanced (moisture-proof) layer.

The qualified diamond board is made of one or more layers of special impregnated hot-setting amino resin covering the surface of high-density board and other substrates, and the back side is added with a balanced moisture-proof layer, and the front side is added with a decorative layer and a wear-resistant layer by hot pressing.

Introduction to the material of the diamond plate

1. Thickness: Laminate flooring is also a difference in thickness and thickness, the thin one is about 8mm, the thick one is about 12mm, and the general thin environmental protection coefficient is relatively high, because it uses less glue, but the impact resistance is relatively poor.

2. Specifications: Standard, wide board, and narrow version are the three specifications of diamond board, and the specifications that are close to solid wood flooring are called anti-solid wood flooring. Different flooring specifications are adapted to the national conditions of different countries, such as wide and narrow boards, which were originally designed to meet the national conditions of our country.

3. Coating: The coating can be divided into aluminum oxide, melamine, and piano paint. The surface of the laminate floor for indoor use should be more than 6000 rpm, as long as the floor with 46 grams of wear-resistant paper can be guaranteed to meet the requirements.

If the number of wear resistance revolutions is low, its material cost is relatively low.