Will the second layer of cowhide lose its skin after a long time, and is the second layer of cow lea

The second layer of cowhide is a kind of genuine leather, and there will be no peeling under normal circumstances! If it is a real scrub skin, the cuticle will fall off, which is the situation that we usually see that the scrub skin becomes smoother after wearing it for a long time.

The second layer of cowhide is the second layer of cowhide cross-cut into two or even three layers of cowhide, and then processed by coating or wet or dry lamination on PU film in the later stage, the cost is relatively low, suitable for making low-end leather products, the appearance can be done and the first layer of leather is quite little, but it is easy to crack after using it for a period of time, because it still has some characteristics of the first layer of cowhide: there are genuine fur fibers, so it is also known as "artificial leather with cowhide fibers", and the durability and strength are not as good as the first layer of cowhide.

Is it peeling? If it is genuine leather, there will be absolutely no peeling! If it is a real scrub skin, the cuticle will fall off, which is the situation that we usually see that the scrub skin becomes smoother after wearing it for a long time. Your problem must be that you bought a fake.

Yes. Cowhide is divided into cow head layer leather and cattle two layer skin, cow head layer skin, refers to the leather on the cow, cattle two layer leather is the leftover material of cowhide broken and then re-bonded and then covered with PVC, PU film processing, thicker than real cowhide, the better cowhide thinner, cheaper and thicker, high-quality first layer cowhide is thinner than ordinary first layer cowhide, ordinary first layer cowhide is thinner than composite cowhide.

The second layer of cowhide has no wrinkles and is very smooth and bright, the first layer of cowhide, there are certain wrinkles when he presses it by hand, and the second layer of cowhide is a variety of leftovers of cowhide into powder, and then add polychriene materials, and then sprayed with chemical materials or covered with PVC, PU film processing, the leather is very thick, the belt is very smooth, and there is no wrinkle when pressed or sent by hand.

Isn't it a warning to the skin? If it is genuine leather, there will definitely be no suspicion of the phenomenon of Qinyou pants that have fallen off the skin! If it's a real sandy skin.

A cuticle will appear.

The phenomenon of falling is the situation that we usually see that the sanded skin becomes smoother after wearing it for a long time! Your problem must be that you bought a fake.

Correct use of leather goods, the second layer of cowhide will not peel. The second layer of cowhide is made of cow suede through wet processing, adding PVC, PU material for re-bonding of leather, suitable for making leather products, it looks very classy, and the appearance is no different from the first layer of leather. 1. If there are stains on the leather in a similar state, wipe it with a clean and wet sponge dipped in warm detergent, and then let it dry naturally.

Try it in an inconspicuous corner before using it. 2. If you spill the drink on the leather, you should immediately blot it with a clean cloth or sponge, and wipe it with a damp cloth to let it dry naturally, and do not use a hair dryer to dry it. 3. If it is stained with grease, it can be used to wipe it clean with a cloth, and the rest will be naturally dissipated or cleaned by detergent, and cannot be scrubbed with water.

4. Do not close the brother to store the furniture of leather products in the sun, it will cause the leather to dry out and fade. 5. There are inevitably subtle scars on the surface of high-quality leather goods, which can be lightened by hand rest and grease. 6. If the leather is accidentally drenched with rainwater, the water droplets must be wiped dry and placed in a ventilated and cool place to dry.

Do not dry over fire or expose to sunlight. 7. Before using leather skin care products, test a little at the bottom or inner side of the leather bag in a less conspicuous place, and then use it on the entire leather goods after confirming that there is no problem. 8. When the leather goods are wrinkled, you can use the iron to set the temperature of the wool and iron it with a cloth.

9. The hardware maintenance on leather goods should be wiped with a dry cloth after use. If it is slightly oxidized, you can try to use flour or toothpaste to gently rub the hardware. 10. Lacquered leather generally only needs to be wiped with soft cloth and jujube.

11. If there are black spots on the leather, you can try to wipe it with the same color leather dipped in alcohol. 12. Suede leather must be used with a soft animal hair brush to remove dust and dirt on the surface, if the pollution is more serious, you can try to use an eraser to gently spread evenly in all directions to remove dirt.

Hope it helps! Pro-3

The first layer of skin is directly processed from the original skin of various animals, or the skin of cattle, pigs, horses and other animals with a thicker skin is cut into two layers after being stripped of hair, and the upper part of the fibrous tissue is processed into various first layer skins. Broken leather is also the first layer of leather, is the whole first layer of cowhide in the leftovers, this material belongs to the manufacture of low-grade leather products, may be manufactured, there will be a slight difference in the thickness of the left and right of the skin, but after all, it is the first layer of leather, wear it will not appear peeling and peeling.

The second layer of cowhide is the leather made by adding polyethylene material to the leftovers of the first layer of cowhide and then adding polyethylene material to re-sock and bonding, and then spraying with chemical materials or covering PVC and PU films. The second layer of leather is thicker than the first layer of leather, after a long period of use, the leather will be tortoise, and the serious will break the fierce group, it still maintains the characteristics of the cowhide, but the durability and strength are not as good as the first layer of cowhide. This kind of leather is also known as recycled leather, also known as PU leather, which is suitable for making low-end leather products, which looks very high-grade, and the appearance is no different from the first layer of leather.

However, after use, it will have the same effect as PU skin.

The second-layer leather shoes, in the new time, look and feel, are higher than the first layer of leather with the same **, but after wearing, they will fall off like artificial leather. Because the second layer of leather itself is artificial leather.

The second layer of cowhide is of inferior quality compared to the first layer of cowhide. The second layer of cowhide is usually the second layer of the dermis, also known as the subepidermis or subepidermis, generally lacking the grip, the quality of the second layer of cowhide mainly depends on the following factors: 1

Raw materials: The raw materials of the second layer of cowhide are usually some defective leathers that have been optimized, such as surface defects, insufficient thickness, etc. Therefore, the quality of the raw material directly affects the quality of the second layer of cowhide.

2.Processing technology: The influence of processing technology on the quality of leather is also very important.

The second layer of cowhide may need to be polished, dyed, coated and other treatments during the processing process, and the quality of these treatments will directly affect the quality of the second layer of cowhide. 3. **：

The ** of the second layer of cowhide is relatively cheap compared to the first layer of leather. Some of the ** too low two-layer cowhide may use inferior raw materials or poor processing technology, and the quality may not be as good as a layer of leather. In general, the quality of the second layer of cowhide is worse than that of the first layer of leather, but it is relatively low, and it is suitable for some consumers who do not have high requirements for leather, such as making some low-tassel end leather goods or shoes.

Summary. Kiss, the second layer of cow leather belongs to the dermis.

Kiss, the second layer of cow leather belongs to the dermis.

Cattle two-layer leather is a kind of leather made by adding polyslag and destroying vinyl material after the first layer of cowhide is crushed. Genuine leather is made of animal skin, which is the opposite of artificial leather made of chemical fiber materials. The dermis on the market generally refers to three types: scalp, double skin and synthetic skin.

Beef two-layer leather, also known as "two-layer cowhide" and "microfiber leather", is the leftovers of the first layer of cowhide are broken and added to the resin in proportion to make leather pulp, and then made into a piece of "leather embryo" by mechanical calendering, and then processed by coating or wet or dry lamination on PU film. Therefore, it is no longer considered pure leather, but only a product processed from pure leather. Features:

It is suitable for making low-end leather products, looks very high-grade, the appearance can be done and the first layer of leather is quite little, it still maintains the same characteristics of the first layer of cowhide: the same leather and fur fiber, so it is also known as "artificial leather with cowhide fiber", durability and strength are not Liang He such as the first layer of cowhide.

1. Cattle cut leather will fall off, and cattle cut leather is cattle second layer leather, which is a lower grade product.

2. Natural leather such as cow to canvas leather is thicker, and in order to improve the utilization rate of leather in the tanning process, it is usually cut into two or more layers. The first layer of profile leather is used to manufacture high-grade leather after surface finishing, and the section leather of the second layer and below (referred to as the second layer of leather) has no surface texture layer, and the aesthetics and practicality are not as good as the first layer of leather. In the past, it was common to make two layers of leather by brushing and dyeing"Suede", which is what we call two-layer suede, which belongs to the lower grade of products.

Later, the production principle of polyurethane (PU) artificial leather was applied to the production of leather layering, and a layer of PU was added to the surface of the second layer of leather according to the production method of PU transfer, so that it not only has the hygroscopicity and dimensional stability of leather, but also has the waterproof and abrasion resistance of PU artificial leather. The leather Zhengzhu leather produced in this way is called film transfer leather.

3. Cowhide is thicker and has good mechanical strength and dimensional stability, so most of the leather embryos used in the production of film transfer leather are bovine two-layer leather. Obviously, film transfer leather is the product of the combination of PU leather and leather. The grade of film transfer leather is better than that of synthetic leather and artificial leather, and ** is lower than the leather leather made of the first layer of cowhide profile leather, which is suitable for the manufacture of shoes, belts, handbags, bags, etc.

The second layer of leather is genuine leather.

Two-layer cowhide. It is the second layer of cowhide that is cross-cut into two or even three layers, and then processed by coating or wet or dry laminating film in the later stage, the cost is relatively low, and it is suitable for making low-grade leather products;

The appearance can be made and the first layer of leather is quite the same, but it is easy to crack after a period of use, because it still has some characteristics of the first layer of cowhide, there are leather and fur fibers, so it is also called "artificial leather with cowhide fibers, and the durability and strength are not as good as the first layer of cowhide."