If there are bad sectors in the hard disk, ask for a good repair tool

Let's talk about the main ways to protect your hard drive.

Do not restart the machine suddenly, especially when the hard drive is read/write.

Do not power off while the hard drive is working.

At the time, if you open BT, it is best not to open many other programs, such as opening BT and opening ED and FTP**, and listening***, the cache of the hard disk is not so much to execute so many programs, if it is a long time**, and does not limit a certain speed, the hard disk will have a problem sooner or later.

Regularly inspect the hard drive, perform a defragmentation program every few months, and try to partition in NTFS format.

Pay attention to the protection and maintenance of the hard disk, so that there will be no bad sectors.

The detection software recommends a small software, HDTUNE

noton in utilities

DiskDoctor and NotonSpeedDisk.

If there is a long pause in the disk check program, it is recommended to back up the data inside and find a hard disk again, if the hard disk has a physical bad sector, it is not good to repair, the data inside may be lost at any time, generally the hard disk appears after the physical bad sector will appear on the surface of the disk some magnet fragments, these fragments will make the head bounce up when passing by, and when the head falls, it will stir up new fragments, so that the bad sectors of the hard disk will be more and more until the hard disk can not be used.

I don't know what you're doing. However, the actual bad road is not repaired, but the best thing is now.

Russia's MHDD can effectively shield bad sectors!

This is generally used in computer cities.

However, shielding bad sectors will also exist. It is recommended to replace it if you are not short of money. Thank you.

There are many hard drive bad sector repair software, take DiskGenius repair as an example.

There are two types of hard disk bad sectors: logical bad sectors and physical bad sectors. Logical bad sectors can generally be repaired by software, and physical bad sectors indicate that the hard disk track has been physically damaged, and data backup should be done.

For the sake of our valuable data and prolonging the use of the hard disk, it is recommended that the hard disk be used for a long time or when there is an abnormality, check whether there are bad sectors and repair it in time. Next, we will introduce two ways to repair bad sectors.

1. Check and repair of logical bad sectors.

Logical bad sectors can use Win7's built-in disk detection tool, as follows:

1. Turn on the computer, click to select the C drive, and click "Properties" in the menu bar.

2 In the properties window of the C drive of the local disk, click "Tools - Start Check".

3 The Posture Code Chain Disk Check window pops up, tick "Automatically fix file system errors" and "Scan and try to repair bad sectors", and click "Start".

4 If there are no files in use on the disk, the disk check and repair begins. If the disk is in use, the message "Windows cannot check the disk in use" will pop up, and you will select "Schedule Disk Check".

Note]: The inspection and repair of the bad track of other disks is the same as that of disk C, and you only need to repeat the mold Kaixing.

2. Inspection and repair of physical bad sectors.

DiskGenius, a hard disk bad sector repair software, is used, which provides disk bad sector detection and limited bad sector repair functions - shielding disk bad sectors and delaying the spread of bad sectors.

2. Enter the software interface and select "Hard Disk - Bad Sector Detection and Repair" in turn.

3. In the "Bad Sector Detection and Repair" window, it is recommended to read "Important Tips" first. If there are multiple hard disks, then "select hard disks", one can skip this step; Then click on "Start Repair".

4 After the detection is complete, select "Include good tracks with read and write speed slower than this millisecond (do not destroy data)" when repairing, and then click "Try to repair".

Note: Bad sectors can be repaired directly without detection. For data security, it is recommended that disks that have physical bad sectors no longer be used. Even if the bad sectors have been fixed, don't put important data on them.

There is no way to fix it, only to replace the hard drive.