Walnut trees generally need to put pulp, what are the benefits?

So, why do you need a grout walnut tree? Due to the long menstrual period of walnut treesFruit emerges slowly to improve early fruiting and early harvest of walnut trees. People have to have surgery on the walnut tree. Achieve the purpose of early results.

From May to June each year, the main pole of the walnut tree is about 30 to 50 cm above the ground. Use a sharp knife to cut horizontally along the tree body to the xylem for a week to observe the sap flowing out. The whole pulping process is completed.

If it is a large tree that has not borne fruit for many years, you can also do it again at a distance of 30 cm. Without bandaging, it will be sooner rather than later**.

The number of results increased significantly in the second year after doing so. This is because this period is the peak growth period for walnut trees, which is conducive to wound healing. This is to weaken the tree and temporarily cut off the main main branches of the underground root system and the upper channel, which is conducive to the accumulation of branches, changes the flower bud differentiation rate, and lays a solid foundation for next year's high yield.

Walnut, a deciduous tree, is widely distributed in China. They are cultivated in about twenty provinces and municipalities. Walnuts are rich in nutrients and contain a variety of vitamins and minerals.

It is one of the nut foods that people love. Walnut trees, light-tolerant, moisture-proof, cold-resistant, drought-resistant, well-developed roots, dense growth. There are a lot of walnut farmers in our area.

The so-called degreasing should be the discharge of the nutrient solution of the walnut tree, also known as degreasing. As we all know, there are many reasons why walnut trees fail. This pulping does not have a benign effect but produces ***, which may cause the walnut tree to die.

After one month, pay attention to observe that the wound is healing, and if there is no healing and need to be treated, wrap it in a plastic bag to promote wound healing.

If the walnut tree is pulped, it can ensure the better development of the walnut tree.

I think the walnut trees will grow faster and more lushly after the pulp.

The reason for this practice is to be able to know how to increase its production.

I think this is necessary for the better growth of walnut trees.

The main pole of the walnut tree is about 30 to 50 cm from the road surface. Laser cut along the tree level with a sharp knife to the phloem for one week to observe the sap drainage. The whole process of papermaking is carried out.

If it is a tree that has not been strong for many years, you can do it again at a distance of 30 cm. If it is not tied, it will be cured sooner. In the second year after doing so, the total number of conclusions increased significantly.

Mainly because this period is the peak growth period of walnut trees, which is beneficial for wound repair. This is to weaken the plant type, temporarily disconnect the key branches of the underground rhizome and the top safe passage, which is beneficial to the accumulation of branches and change the flowering promotion rate.

I think this is similar to the definition of ring stripping in many fruit trees, which is to prevent the walnut tree from reaching the top of the branch in the final stage of the nutrient content in the final stage, and where it is not conducive to the growth of the fruit, so that the walnut kernel fruit will be stronger in the large number of fruits. When the grower cuts off the top branches, the nutritional value cannot be transported upwards again, and the saved nutrients are sent to the fruit-bearing branches and leaves, and the walnut kernels will be large and good.

The pulp of walnut trees is generally carried out in May and June, on the branches of peach trees, and ring stripping is carried out with special CNC tools to break the bast part of the fruit tree. After the pulp is released, the nutrient transportation safety channel of the walnut tree is deciphered, and then the rapid growth and development of the upper branches of the walnut tree is inhibited, so as to adjust the accumulation of the upper endosperm of the walnut tree, which can promote flowering and improve the flowering conclusion, so it can bring the effect of increasing the production of walnut trees. In the selection of pulp time, how to be too early is not conducive to the growth and development of new shoots.

If it is put late, the original effect is not significant, which will cause the wound to be difficult to heal and cause dead branches, causing unnecessary damage.

It must be a walnut tree that grows to six years on the left digger's right, and the walnut tree grows very luxuriantly, this kind of flowers and trees have a strong ability to heal after the circumcision, and at the same time it must be a big tree with few or no conclusions before putting the pulp after the circumcision to observe carefully, if the position of the circumcision has not healed after a month, it must be immediately packed and bundled to lighten the scar. The actual operation of pulp is not something that anyone can do, and only experienced planters can use the knife, otherwise it is very easy to cause errors in the actual operation, and even because of improper operation, it is very likely to cause the death of walnut trees.

This is mainly to maintain a better balance, so that the results can be better and there is a higher yield.

The reason why the first point 1 must be released is this, it will be particularly delicious, and the first town is such a quality, and the big good place is to be able to release the royal filial piety tung pulp, and it is very nutritious.

The main purpose is to prevent malnutrition, so that the walnut tree can become stronger, and even if it is damaged, it can replenish water in time.

It is to make the reproduction rate of walnut trees higher and higher. The advantage is that it can release some ethylene, which makes walnut production better.

In this way, some diseases can be better prevented, and some insect pests can be prevented. The advantage is that it can help grow, can increase yield, can improve quality, can make walnuts grow better, and can prevent some pest problems.

In the process of walnut tree growth, there will be "bitter water" in the trunk of the walnut, and ginger is also to promote flowers and fruits, so that walnut trees can increase production.

So why pulp walnut trees? Due to the long physiological period of walnut trees, the fruit bearing is slow, in order to improve the early fruit setting and early yield of walnut trees. People had to operate on walnut trees.

to achieve early results. Below, let's take a look at the benefits of walnut tree pulp, I hope it can help you.

Walnut trees are widely distributed in our country, are not so picky about the soil, have a tall crown, and are up to 100 years old. In previous years, it mostly grew in the mountains and in farmers' yards, and some grew in the fields near the hills. When I was young, not only did my hands dye black in order to eat walnuts, but some children also fell from trees, and these past memories can only be recalled.

Nowadays, walnut trees are planted in the field, and because the young trees bear fruit relatively late, they usually bloom and bear fruit in about 6-8 years.

It is best to choose 20 cm at the base of the main trunk or 15 cm at the side branches for ring stripping. Note: The ring stripping mouth should not be too wide, do not hurt the wood, and the slurry mouth is high and low on the other side, which is conducive to smooth slurry discharge and can also prevent rain from entering.

The slurry release time should be around the beginning of June, and the noon when the weather is sunny is better. At this time, the temperature is relatively high, which is conducive to wound healing. If the wound has not healed after 20 days, quickly find a plastic film to wrap it to prevent the branches from denourishing and dying.

The advantage of pulp is that the walnut tree is artificially cut off from nutrition, so that the physiological malnutrition, which leads to the balance of reproductive nutrition, and achieves the purpose of early fruiting. This method is conducive to early flowering and fruit set, and avoids physiological fruit drop.

Summary: In the selection of slurry time, how to be too early is not conducive to the growth of new branches. If it is put late, the effect of the year will not be obvious, and the wound will be difficult to heal and cause dead branches, resulting in unnecessary losses.

To sum up, there are many factors caused by the late fruiting of walnut trees, and the seedlings are trees planted directly with walnuts, which have not been transplanted and grafted. Basically, the fruit is seven or eight years later, and the fruit is on the periphery of the canopy, and the number is not large, so putting pulp is the shortcut to solve the problem of late fruiting.

First, pruning young trees should be divided into three layers. The first floor is about one meter high from the ground, and the second floor is 70 miles from the first floor. The third layer is 70 centimeters away from the second layer.

Second, the fruiting tree is pruned, the strong skills are removed, the upright branches are removed, and the honey skills are removed.

Third, for the purpose of ventilation and light transmission.

Walnut tree pruning is simple and easy to learn, with a little pruning, it yields a good yield every year. I hope that the fruit people will have a bumper harvest every year and sell it at a good price. Get on the road to prosperity as soon as possible.

The walnut tree, which will be planted in front of my house, is also called the golden grapefruit tree, which belongs to the dicotyledonous plant of the golden grapefruit family. The varieties of walnut kernel trees are caused by the improvement of natural walnuts through human grafting, which is native to Central Asia, and the species planted in China are all improved species, because of the high production of such riverbank trees, thin skin, more oil, and taste more fragrant. Pulp, that is, what we often call glue, refers to the discharge of the culture liquid of the walnut tree, and the pulp of the walnut tree.

A large amount depends on increasing the production of walnut trees, improving the plant type, and not placing it well, which will cause adverse reactions and harm the growth and development of walnut trees. The specific reason for the pulp of walnut trees. Walnut kernels are perfected later than other peach trees, and walnut trees produce three to five times as much fruit in a year, so the fruit trees must grow and develop for a longer period of time, so the growers cut off the top branches and leaves, so that the culture liquid can not be transported to the past, and the nutrients saved will be transported to the fruit-bearing branches.

Walnut kernels get complete nutrients, of course they look big and good, and the production volume is certainly increased. The slurry release time should be selected around the beginning of June, and the sunny afternoon is appropriate. At this time, the ambient temperature is relatively high, which is conducive to wound repair.

If the wound has not healed after 20 days, quickly find plastic film to tie it up to avoid the death of the tree technique without nutrients. The benefit of pulp is that the walnut tree is physiologically deficient in nutrients after being cut off by human factors, which in turn causes the nutritional balance of the reproductive system, and achieves the goal of early conclusion.

This type of method is conducive to early blooming and fruit set, and prevents physiological fruit loss. Originally, walnuts generally bloom and bear fruit in three years after planting, but sometimes the soil layer of pecans is more fertile, resulting in walnut trees growing faster, and the branches are very luxuriant, but they do not bear fruitThe effect of the commonly used ring stripping is consistent and can drive conclusions.

It is to avoid the interference of some insects, and it can also promote the growth of walnut trees. Reduce the probability of thinning flowers and fruits.

Because the walnut tree grows slowly, the menstrual period is relatively long, and it takes a long time to bear fruit; Pulping will advance the fruiting period of the walnut tree.

Walnut trees are generally ridges in the big tree when the need to release water with Zen infiltration, other times without special circumstances are not necessary, otherwise the trunk attack will cause too many wounds, will reduce the tree momentum, and may cause bacterial infection, causing unnecessary hidden dangers.

1. Do not water before grafting, the root system of hemp walnut has developed root system and strong water absorption, so too much water will add more serious injury to the flow.

2. 10 days before grafting, the rootstock is sawed off and released to avoid excessive wounded fluid to reduce the survival rate.

3. In order to avoid excessive wound fluid, you can see the trunk to release water. For some special rootstocks, the nutrient solution in the tree is not large, we can quietly talk about the ridge to use a knife saw spiral saw on both sides of the trunk to release water, and the wound should not be too deep, which helps the survival rate of hemp walnut grafting.

4. Empty rough root drainage, for the rootstock with too much wound fluid, you can dig out a few taproots, cut off the base or cut the water, this Doufeng town planting practice also helps to improve the survival rate of walnut grafting, when the yard survives or there is no damage to the flow phenomenon and then bury the roots.

5. When grafting, you can put some toilet paper on the rootstock break, that is, to avoid direct sunlight to the wound to moisturize, and to absorb the wound flow when there is a wound to prevent the yard from being flooded.

6. If it is found that there is fluid accumulation at the graft after grafting, the wound fluid should be released in time and then re-bandaged.

1. Do not water before grafting, the root system of hemp walnut root system has strong water absorption, so too much water will add more serious injury to the flow. 2. 10 days before grafting, pre-sawing the rootstock and releasing water to avoid excessive wound and fluid to reduce the survival rate, this practice is the best to master and easy to operate, the survival rate of walnut grafting is high, and most of the walnut grafting is done now. 3. In order to avoid excessive wound fluid, you can see the trunk to release water.

For some special rootstocks, the nutrient solution in the tree is not large, we can use a knife saw spiral saw on both sides of the trunk to release water, and the wound is not too deep. 4. Break the root and release water, for the rootstock with too much wounded liquid, you can dig out a few taproots, cut or cut and release water, this practice also helps to improve the survival rate of walnut grafting, and then bury the roots after the yard survives or there is no damage flow. 5. When grafting, you can put some toilet paper on the rootstock fracture, that is, to avoid direct sunlight to moisturize the wound, and to absorb the wound flow when there is a wound to prevent the yard from being flooded.

6. If it is found that there is fluid accumulation at the graft after grafting, the wound fluid should be released in time and then re-bandaged. The above practices can improve the grafting survival rate of walnuts, and we can choose one or more practices according to the actual situation.