How to use the filters and feathers in PS?

Updated on technology 2024-08-09
12 answers
  1. Anonymous users2024-02-15

    Filters: 1Click on Filter - Blur - Box Blur.

    2.Set the radius size and click OK.

    3.The box blur setting is complete.

    <>2.Press shift+f6 to open the feather, set the feathering value, and click OK.

    3.Press shift+ctrl+i to unselect.

    4.Press Alt+Delete to fill with the foreground color.

  2. Anonymous users2024-02-14

    Very simple. You first select the rounded rectangle tool to select the image you want to keep, then Ctrl+Enter to change the path to a selection, then invert the selection, then give 10 to 20 feathers, and finally delete is it. If you want to make the effect more obvious, you can use some blending modes.

  3. Anonymous users2024-02-13

    Filters are used differently for different **, there are many filters, and feathering is to soften the edges of the selection.

  4. Anonymous users2024-02-12

    These two features depend on how you use them. How to match what effect is feathering so that the edges have a gradient effect, which is natural. If you want to cut a person to a background, use the lasso tool to buckle the person off, and feather the edge a little bit to a value of 15-20

    Cut, drag onto another **.

    I can also make PS fonts. Wait..

    Filters produce artistic effects. This is the most flexible to use, and it often requires several filters to be used together. For example, the face of the selected character (channel buckle image) can be rubbed with a blur filter. Then just draw the eyes, eyebrows, and mouths with a history brush. The face is smooth.

  5. Anonymous users2024-02-11

    The filter is very simple, just find the effect you want to do and you're good to go.

  6. Anonymous users2024-02-10

    PS's feathering tool should be summoned with the shortcut key "shift+f6", and the common ways to use it are as follows:

    First, open the "PS software" on the computer desktop, as shown in the figure below

    <>3. Next, we click on the "Selection" tool in the left toolbar, as shown in the following figure:

    <>5. The PS feathering shortcut key is shift+F6, press shift+f6 after selecting the selection to bring up the feathering panel. As shown in the figure below:

    1. Shortcut keys.

    The shortcut key for feathering is: Ctrl+Alt+D.

    The shortcut key for feathering in PS CS3 and CS5 is: Shift+F6.

    In addition, Photoshop software supports custom shortcuts. Users can customize the shortcut keys of feathering according to their preferences for ease of use.

    2. Feather the edge of the mask.

    In the Layers panel, select the layer that contains the mask you want.

    In the Masks panel, click the Pixel Mask or Vector Mask button.

    Drag the Feather slider to apply a feather effect to the edges of the mask.

    Feather blurs the edges of the mask to create a softer transition between masked and unmasked areas. Within the range of pixels set using the slider, feather is applied outward along the edges of the mask.

  7. Anonymous users2024-02-09

    P.S. feathered in the toolbar. On the left side of the toolbox, under the Marquee tool, there is a feather pixel selection in its property bar, and its feather hole sensitization can be used by opening the PS software first.

    Then select the "Ellipse Marquee Tool" in the left toolbar, select the area you want to feather, finally select the area, and right-click to select "Feather", and set the feather radius as you need.

    The use of PS featheringOpen PS software, create a new canvas, or open a **, select "Ellipse Marquee Tool" in the left toolbar, select the area you want to feather, in the selected area, right-click and select "Feather Mess", set the feather radius as needed, right-click the mouse to select "Fill", you can see the feather effect after filling, you can also find the feather in the menu bar "Select--Modify", set the feather radius, and click the "OK" button.

  8. Anonymous users2024-02-08

    PS's feathering tool should be summoned with the shortcut state comma key shift+f6, and the specific process is as follows:

    Tools Raw materials: Dell XPS13-9350-3708, Win10, Photoshop2019.

    1. First of all, play the game to tease the PS software on the computer desktop, as shown in the figure below.

    2. Then open a ** that needs to be feathered, as shown in the figure below.

    3. Next, we click on the Selection tool in the left toolbar, as shown in the image below.

    4. Then select an area in **, as shown in the figure below.

    5. PS Feather shortcut key is Shift+F6, press Shift+F6 after selecting the selection to bring up the Feather panel.

  9. Anonymous users2024-02-07

    1. First open the Photoshop software.

    2. Then open the two ** on the computer.

    3. The goal is to put the aircraft on the background of the blue sky and white clouds after feathering, and first see the effect of no feathering. Select the aircraft, then select the Ellipse Marquee tool in the toolbox, set the feather value to 0, and drag the region in the area to select the aircraft.

    4. Press Ctrl+C on the keyboard to copy the selected area! Open the blue sky and white clouds**, press the keyboard CTRL+V and paste it in! If the pasted airplane is very large, you can select the airplane and press Ctrl+T on the keyboard to deform it to adjust the airplane to the appropriate size and position.

    Regarding the question of where the PS feathering is in the wild mind,The following will be answered in detail。

    5. You can see that when feathering is not used, the plane and the background are not fused together, which looks unsightly.

    6. Re-process after revocation**. Select the Airplane**, or select the Ellipse Marquee tool in the toolbox, enter a feather value of 30, and drag the mouse to select the airplane area.

    7. In the same way as above, press Ctrl+C on the keyboard to copy the selected area! Open the blue sky and white clouds**, press the keyboard CTRL+V and paste it in! If the pasted plane is large, you can select the plane and press Ctrl+T on the keyboard to deform it to adjust the plane to the appropriate size and position.

    8. After using feathering, I found that the edge of the background layer of the airplane and the blue sky and white clouds were blended together. It looks much brighter than when there was no feathering on it. Everyone should understand the meaning of feathering, the larger the feathering value, the more the edge of the feathering and the background are fused, of course, the feathering value is not the bigger the better, if the feathering value is set too large, it will affect the effect, so choose the appropriate size of the feathering value according to the actual needs.

  10. Anonymous users2024-02-06

    Feathering: Achieve the effect of natural cohesion.

    In Photoshop, feathering is a constituent-specific item. The use of drawing in design is very wide, and in general, is an abstract concept. The exact feathering value in practice depends entirely on experience.

    The larger the feathering value, the wider the blur range, that is, the softer the color gradient; The smaller the feather value, the narrower the blur range.

    Here's how:

    1. First open the PS software, and then open the required ** in PS.

    2. Sakura and press the shortcut key "Ctrl+J" to copy the layer.

    3. Then select the "Ellipse Marquee Tool" in the left toolbar and draw a selection on **.

    4. Next, right-click in the selection, select "Feather", modify the feathering radius in the dialog box, and click "OK".

    5. Then press the shortcut key "Ctrl+J" to copy the selection, turn off the original **background layer, and you can see the feathered**.

  11. Anonymous users2024-02-05

    Feathering is a PS term, and the principle of feathering is to blur the connection between the inside and outside of the constituency, and the larger the feathering value, the wider the blurring range.

    1. First of all, open PS to add a ** to enter.

    2. Then select the marquee tool at the top of the left rail (here select the rectangular marquee as an example).

    3. Draw an elliptical selection on **, how to right-click the macro and click on the layer to select the pop-up feather option.

    4. Select the value of the radius to be feathered.

    5. Defend the block, and then select the inverted option of the selection drop-down on the menu bar. Then press the delete key to delete it.

    6. Create a new blank layer. Click on the foreground color option and select a desired color (green here) as the foreground color. Then press the alt+delete key to fill in the color, and you can see the feathering effect of **.

    Precautions

    The feather changes according to the value of the input radius, the larger the value, the wider the blur range, and vice versa.

  12. Anonymous users2024-02-04

    1. Select the content of the layer you want to feather: hold down the Ctrl key.

    Click on the layer thumbnail with the mouse to select it; Or press to select all images.

    2. Click "Select" - Transform Selection, or press Alt+S+T key combination, and 8 control points will appear on the border of the selection.

    3. After executing the "Transform Selection" command, the tool options bar is shown in the following figure. Click the Link icon to keep the aspect ratio locked, then enter 90 in the W (width) and h (height) boxes to zoom out by 90% of the marquee.

    After the adjustment, press Enter to confirm.

    4. Click "Select" - Reverse ", or press the shortcut key.

    Ctrl+shfit+i to make an inverted selection of the selection. The image below is a screenshot of the selection reversed:

    5. Click "Select" - Modify "- Feather", or shortcut key shift+F6 to pop up the "Feather Selection" dialog box, enter a value, such as 50, OK.

    6. The feathered selection is shown in the figure below. Before and after feathering, you can see the transformation of the edges of the selection.

    7. After the selection feather operation, press the Delete button to soften the edges of the Pose Slice to produce a transitional translucent effect. If the feathering effect is not obvious, you can press the del key several times, and each time you press it, the feathering effect will increase once.

    8. After the feathering is completed, click "Select" - "Deselect", or press the Ctrl+D shortcut key to deselect the box.

Related questions
4 answers2024-08-09

Make ice cube words with PS experience.

7 answers2024-08-09

PWD=J4Q4 Extraction code: j4q4 Delicious Retouch 5 is a very good Photoshop portrait beauty plug-in extension panel。 The DR5 expansion panel focuses on portrait retouching, and the plug-in contains a variety of functions suitable for portrait retouching, which can quickly carry out portrait retouching, and the dermabrasion plug-in DR5 is suitable for rapid beauty and dermabrasion in photo studios and photographer portrait post-processing. >>>More

10 answers2024-08-09

The sponge is covered with the pigment squeezed in the paint box, and then spray some water on the sponge and then close the lid of the paint box to ensure that the pigment does not dry out and moisturize. The absorbent sponge can also absorb excess pigment and water, and the absorbent sponge can be washed and reused. >>>More

8 answers2024-08-09

As companies attach great importance to computer security, more and more companies choose to add company computers to the domain control to control. How to quickly add a computer from the LAN to the company's domain? For details, please see how I introduced below! >>>More

10 answers2024-08-09

Wooden chopsticks: Advantages, soft, softer than teeth, will not knock teeth; The appearance is diverse, and the wood itself has a very variety of textures, the art of nature. And it is also very convenient for manufacturers to do hot stamping; It is not easy to burn and has low thermal conductivity. >>>More