What problems will be encountered in the process of dismantling and washing of the washing machine,

Washing machine

It will be encountered in the process of disassembling and washing the washing machineThe screw of the hexagon of the clubTherefore, the tools must be prepared before dismantling, otherwise the dismantling and washing work cannot be carried out smoothly. This kind of screwdriverIt is generally sold in hardware stores and online。This is also in order to avoid non-professionals from goingDisassemble at will, so it's best to find a professional master to clean the washing machine.

The average customer may not clean the washing machine regularly, so many customers encounter the washing machine when they disassemble and wash itRusty screws, causedThe connecting shaft, clutch and wave wheel connection are rusty and the screws of the wave wheel are difficult to removeIn this case, we must not use brute force, otherwise it will destroy the screw, and the solution is to use a hammer firstApply even forceShake it and replace it with a new screw in time after removing it.

In the home appliance cleaning industry,Technology is fundamentalWith technology, how can we master and use it proficiently? Yes, definitelyPractice, which is true in any industryWithout practice, everything is on paper, the home appliance cleaning industry is particularly prominent. I already have a business in the home appliance cleaning industry11 yearsOnly by going deep into the customer's home to dismantle and clean, practice, can I master my own technology and master more and more, which is why my curriculum has always been"Theory + Practice".The reason is that even the practical content accounts for a large proportion, and it is much more efficient to let the students do it by themselves than to talk about it empty.

Like the wave wheel washing machine encounteredShaped screws and screws are rusty, I will definitely reply to everyone in time when I see it!

The problem is that it may cause damage to the washing machine, which may cause the washing machine to malfunction, and it can also lead to the washing machine becoming clogged, and the washing machine will not be cleaned. The solution is to find some professional maintenance workers to carry out repairs.

It may affect parts and accessories, and may lead to the loss of parts during the disassembly and washing process, and then it may cause the washing machine to fail to start, so at this time, you should understand the instructions and seek help from professional and technical workers.

In the process of dismantling and washing, there will be a shortage of parts, or there will be rust of parts, and there may be too much noise. Be sure to understand the structure of the washing machine, so that you will not encounter these problems during the process of dismantling and washing.

It is necessary to pay attention to the structure, there is a gap in the structure of different brands of washing machines, and the power supply must be cut off, and you can ask a professional master to repair it.

The master is in that city, and I also want to disassemble and wash the washing machine and the range hood stove.

If the gear is damaged, the gear can be replaced directly; If the wave wheel is damaged, replace it with a new one; If the mechanical part is stuck due to rust, disassemble the motor and properly lubricate the rotor. There are mainly the following reasons: 1. If the wave wheel floats up when washing clothes, it means that the wave wheel is broken, or the gear may have worked for a long time, the grinding is loose, and it begins to slip, resulting in the wave wheel loosening.

2. Check whether the wave wheel is damaged, if it is not powered on, it can be easily rotated to the wave wheel that is damaged. 3. If it is because there is no maintenance for a long time, the mechanical part is stuck due to rust, causing the washing machine wave wheel to break. Suggested Treatment:

1. If the gear is damaged, the gear can be replaced directly, pay attention to the gear is divided into eleven teeth and ten teeth, eleven teeth are more common, pay attention to the selection of appropriate gear. 2. If the wave wheel is damaged, directly remove the wave wheel and replace it with a new one, when replacing it yourself, if there is no accurate judgment on its size, you can take the old parts to the home appliance accessories and buy a new one, how to remove it and how to install it. If the washing machine is under warranty, contact the manufacturer and ask the manufacturer to send someone to repair it.

3. Disassemble the motor directly and properly coat the rotor with some lubricating oil. Or replace the lower rotating bearing and reassemble it again. If you have checked all of the above and found no problems, you should contact a professional for repair to avoid unnecessary losses.

Generally speaking, the washing machine has been used for too long, and the screws are loosened because the washing machine often vibrates; or the gap between the screw and the fit becomes larger and worn; Or the teeth on the fixing hole between the wave wheel and the motor shaft are ground off. It needs to be analyzed in detail, and then it can be replaced with new parts, and the components that need to be repaired can be repaired.

1. The wave wheel sometimes feels tightened, but in fact it is not necessarily, you need to check it, otherwise you will feel tightened every time, and as soon as the washing machine works, it vibrates, and the wave wheel falls off. Under normal conditions, a screw will fix the center of the wave wheel on the wave wheel shaft, the screw is loose, and the working wave wheel of the washing machine will fall off after being subjected to the reaction force, pay attention to the screw needs to be tightened with relevant tools, and try your best until it cannot be screwed.

2. If the wave wheel is not tightened, it will automatically fall off, and you can use a packing belt for the outer box of the washing machine to wear it under the wave wheel, and lift it up forcefully to lift the wave wheel.

3. There is also a possibility that there is a problem with the wave wheel itself. Inspect the central shaft of the wave wheel to see if the pinion is worn, and if so, replace the wave wheel. The installation of the wave wheel is not difficult, you only need to buy one according to the laundry model, remove the bad one and install it.

Note that when installing the wave, do not damage other parts, and the bottom plane of the machine should be consistent with the surface of the wave wheel.

1. Before turning it on, first make sure that the washing machine is turned off. The key oak then only needs to use a small tool iron sheet, screwdriver) to pry the bezel open.

2. After opening, you can see a small water pipe and a small round lid.

3. Then open the small round cover, and directly rotate it counterclockwise and unscrew it. It is mainly used to accumulate debris and dirt.

4. Hold the handle in the middle and rotate it counterclockwise, and you can take out the lid.

5. The hair on the clothes of the Liang Banquet, the confetti in the pockets, and even the coins may fall inside. If you don't clean it up for a long time, it will naturally produce peculiar smells. Then after everything is cleaned, reinstall it and you're good to go.

1. If the grid voltage is too low, the output torque of the motor will not reach the specified value, and the drum cannot be driven. 2. Too much washing is placed, and the motor is overloaded by exceeding the rated weight. 3. When the transmission belt slips or falls off, the torque of the motor cannot be transmitted to the running parts, which will cause the drum not to rotate.

4. If the capacitor is damaged, the washing machine uses a capacitor to run the motor, and when the capacitor is short-circuited, broken-circuited, grounded and aging, the motor cannot start and run normally.

Suggested workaround:

1. When checking, check whether the power supply voltage is normal, if the voltage is too low, you should pause or use the booster to adjust the voltage to the normal value before turning on.

2. If there is too much washing, you only need to take out some washing and rotate normally after reducing the load.

3. Check whether the V-belt is worn or falling off; If so, the transmission belt needs to be replaced, or the motor position needs to be adjusted to make the tightness of the transmission belt suitable for use.

4. Replace the capacitor with a new capacitor of the same specification, and the motor will start and run normally.

5. When the motor starting winding is broken, repair and replace the new electric bucket opener.

6. The drum is stuck by a foreign object. Foreign bodies need to be removed. If it still can't be solved, then you need to ask a professional maintenance person to come to deal with it.

1. Find a suitable Phillips screwdriver, and then unscrew the screws of the middle base, as shown in the figure below.

2. When the screws are fully loosened, unscrew them by hand, so that the base is loose and taken out, as shown in the figure below.

3. When taking out the base, it is best to tilt and choose to take it out at the place with the largest diameter in the washing machine barrel, otherwise it will be stuck and cannot be taken out, as shown in the figure below.

4. After taking out the base, you can see that there are a lot of dirty things in the inner bucket, wipe it clean with a wet rag, as shown in the figure below.

5. The taken out base can be directly rinsed with running water, note that both sides are flushed, as shown in the figure below.

Hello I am engaged in the R & D and design of washing machines, the current market above the washing machine is divided into two kinds of automatic washing machines and double barrel washing machines. Next, I will tell you about the cleaning process of these two types of washing machines.

1. The internal structure of the double-barrel washing machine is relatively not very complicated, use a screwdriver to remove the screws in the washing bucket, remove the wave wheel, and rinse it with a rag or water.

2. Fully automatic is relatively complex, let me dissect them one by one.

1) Remove the screws connecting the upper frame of the washing machine with the box.

2) Remove the outer lid screws that connect the inside to the bucket.

3) Use a screwdriver to remove the screws and take out the wheel.

4) Use a big wrench to remove the big nut that fixes the stainless steel barrel under the bottom of the wave wheel 5) Then take out the stainless steel barrel to clean the bottom of the barrel (generally used for more than a year, this bottom is very dirty, I have dismantled many of our experimental machines are very dirty, and this washing shop of many automatic washing machines is to clean this part of the dirt).

I hope it can help you and everyone, if you don't understand, you can discuss it!

Wipe with a soft cloth dipped in detergent and rinse off with water.

In order to keep it clean, it is recommended to rinse it with clean water along the wall of the cylinder after each use.

Do you mean the inner barrel? It can be wiped directly with a rag. If it is between the inner and outer barrels, then the inner barrels must be removed and cleaned.

How to clean the washing machine?