What should I do if the floor tiles are broken, what should I do if the floor tiles are corroded?

It can be rebonded with epoxy resin adhesive, which is characterized by corrosion resistance, anti-aging, strong tensile strength and waterproofing.

How to use:1Use a dry cotton cloth or sandpaper to remove dust, oil, rust, etc. from the joint, and then wipe it with a cleaning agent such as acetone or trichloroethylene to clean the surface.

2.Unscrew the front cover, and stir well according to the weight ratio of agent A + agent B as described above (a:b=2:1); In order to ensure the effect of use, it can also be used after vacuuming.

3.Note that it must be used up within the operating time, otherwise it will solidify, resulting in waste of material, and the maximum strength can be obtained after 24 hours.

4.After gluing. 2 6 hours curing at room temperature, 40 degrees Celsius, 50 degrees 1 3 hours curing; Use 24 hours after gluing; Better adhesion after 10 days. On cold and humid days, bonding at room temperature of 15-25 degrees is good.

5.Bonding straight faces. When hanging noodles upside down.

After gluing, it must be pasted with self-adhesive paper. Or locate with 502 glue. Epoxy resin adhesive formulaEpoxy resin AB adhesive is a two-component high-temperature adhesive based on epoxy resin, which is mainly suitable for the bonding of high-temperature resistant metals and ceramics.

Its operating temperature is -50 +180 and can reach +250 for short periods.

Renovated tiles may loosen, fall off, or be damaged for various reasons. Here is a share of emergency solutions for tile gaps.

If it's just a missing corner of the porcelain, you can use marble glue to make up for it, and if it's broken, replace it directly

If the corrosion hurts the surface of the floor tile, then change it, if it is not injured, remove the corroded place, and the removal method and steps are as follows:

1. Restore the original tile color first, thoroughly clean the stains, and the porcelain surface of the tile is destroyed by acid detergent: it is dull from the side, and the corroded place is particularly easy to get dirty and black from the front, and if you look carefully at the uneven sharp pits, you will feel rough when touching it with your hands, soak it with tile cleaner for a while and then brush it with a soft brush, and wipe it with a towel when approaching the surface of the floor tile to avoid hurting the floor tiles;

2. If there are scratches on the surface of the floor tiles, for the scratches on the surface that are damaged, sanded with water sandpaper, and blackened after strong acid corrosion, a special polishing sheet is used to grind the damaged brick surface to the brightness of the new brick, and then use nano-level curing materials to do enhanced anti-fouling treatment, completely restore the state of the new brick, and the gloss reaches about 90C°, so that you can not see the traces of the original damage (this is more difficult);

3. After cleaning the stains and scratches, you can add a little oil to the floor tiles to increase the gloss of the floor tiles.

1. If the surface of the floor tile is a small pit, you can use marble glue plus curing agent to repair, first clean up the small pit and its surroundings, then apply jade glue reinforcing agent, fill the small pit, wait for it to dry thoroughly, and then use frosted paper to polish. 2. If there is a crack, you can use tile paste to cover it, clean the surface of the tile with the same coarseness, and then take an appropriate amount of tile paste to apply it, and wait for it to dry out. It is a crack that can be covered with tile paste, and the surface of the tile is also cleaned, and then take an appropriate amount of tile paste to apply it, and wait for it to dry.

3. If the damaged area is relatively large, the whole tile needs to be replaced, and the beauty joint around the tile needs to be scraped off before the change, and then the machine is used to cut along the tile diagonally, and the broken brick is taken out, and then the new tile is installed and filled with the beautiful seam. Understand the TV network

Enter the area and get the decoration for free**].

New house floor decoration, many people will choose to pave the floor or tiles, depending on the interior decoration style, and paving tiles to make the necessary preparations, if the tile paving is damaged, to call for timely replacement. So how to remedy the rotten tiles, and what to pay attention to when laying tiles, do you understand? Now let's take a look.

1. How to remedy the rotten tiles 1. Prepare tools such as cutters, hammers, shovels, etc.; 2. Use a cutting machine to cut a crack around the rotten tiles that need to be replaced; 3. Use a shovel to cut the good seams of Zhaoye, lift up the rotten tiles, and try not to destroy the good tiles; 4. Remove the original cement, refresh the cement, and pave the new tiles. 2. What to pay attention to when laying tiles 1. Before paving tiles, you need to prepare a large basin and put the tiles into the basin to soak for a period of time until the tiles will no longer bubble. When laying tiles in the kitchen and bathroom areas, it is necessary to pay attention to the design of a certain slope to prevent water accumulation.

If you do not pay attention to the damage to the waterproof layer during construction, you must redo it. 2. After laying the tiles, the ground needs to be covered with cardboard or other materials on the tiles, and the tiles are protected for a preliminary basis, and the cardboard can be removed after 24 hours, so that you can walk freely on the tiles, which better prolongs the service life of the tiles. 3. When the tile is paved, there will inevitably be residual substances on the surface of the tile, and it needs to be cleaned after 1 hour of paving.

After the caulk has been adhered and 4 hours have passed, it will be much more difficult to clean it again. After one day of tile paving, it is also necessary to check whether there is a hollow drum in the combustion, and if there is, it needs to be re-laid. How to remedy the rotten tiles, and what to pay attention to when laying tiles, I will introduce it here, do you understand?

Rotten tiles need to be remedied in time, otherwise it will affect the normal use of the later stage and shorten the life of the tiles.

Do the math how much it will cost you to renovate your home