How to apply the brakes correctly in subject 2 and can you apply the brakes lightly in subject 2 dur

Detailed explanation of how to apply the brakes.

When the speed is low, when parking, first press the clutch, then press the brake, and stop. Because the lower the speed of the car, the greater the friction resistance between the tires and the ground, and if you step on the brakes first, the engine is easy to ignite.

When the speed is high, when parking, first press the brake, then press the clutch, and stop. Because the higher the speed of the car, the greater the inertia of the car, if you step on the clutch first, the inertia of the car will be greater, so you must first step on the brakes to reduce the speed to a certain extent, reduce it to a speed of 5 kilometers per hour 10 kilometers per hour, and then press the clutch, stop, the engine is not easy to turn off.

The operation essentials of clutch treading at the beginning are one fast, two slow, and three linkages. That is, when the pedal is lifted quickly; When the clutch is semi-synchronized (at this time the sound of the engine changes), the pedal is lifted slightly slower; In the process of linkage to full integration, the pedal is slowly lifted. While the clutch pedal is raised, gradually press the accelerator pedal according to the amount of engine resistance to make the car start smoothly.

Proper use when braking. In the driving of the car, except for low-speed braking and parking, you need to press the clutch pedal, and try not to press the clutch pedal in other situations. The maneuvering method of braking and stopping in low-speed driving is to press the brake pedal first and then the clutch pedal to bring the car to a smooth stop.

Correct operation when changing gears. When shifting gears while driving, the operating clutch pedal should be quickly depressed and lifted, and the phenomenon of semi-linkage should not occur, otherwise, the wear of the clutch will be accelerated. In addition, it is necessary to pay attention to the coordination with the throttle when operating.

In order to smooth the shift and reduce the wear and tear of the transmission shift mechanism and clutch, the two-foot clutch shift method is advocated. Although this method is more complicated to operate, it is a good way to save money by driving.

Subject 2, also known as the road test, is a part of the motor vehicle driver's license assessment, is the abbreviation of the field driving skills test subjects, the test items include reversing into the garage, side parking, ramp fixed-point parking and starting, right-angle turning, curve driving five compulsory tests.

In the subject 2 exam, there are places where you need to apply the brakes, such as when you start at a fixed point in the middle of a slope, when you park in the side direction, and when you reverse. However, in addition to these points, it is not allowed to stop in the middle of the project, that is, the speed cannot be reduced to 0.

Therefore, in the subject 2 exam, you can apply the brakes lightly, but you can't stop the brakes, let alone turn off the engine. Otherwise, there will be a deduction of points or even disqualification.

In the subject 2 exam, you can apply the brakes lightly, but you can't stop or turn off the engine.

Subject 2, also known as the small road test, is a part of the motor vehicle driving license assessment, is the abbreviation of the field driving skills test subjects, the test items include reversing into the garage, side parking, ramp fixed-point, right-angle turning, curve driving five compulsory tests.

Does subject 2 use the brakes? The senior coach will tell you the details of the operation, so that you can pass the exam once!

I feel that it is more stable to step on a little, and it is easy and fast to only step on the clutch.

Subject 2. It is the most practical subject in the driving test, and there are too many points involved. Sometimes the speed control is not reasonable, and it is easy to press the line, or even not pass directly. So some people ask if you can use the brake to control the speed of the car, and the following tells you how to brake without deducting points.

Subject 2: Do you deduct points for stepping on the brakes?

No points will be deducted. The ramp of subject 2 stops and starts.

Side parking, reversing into the garage.

The items all require brakes, and other items can also use dust return brakes, and some students can pass the exam by lightly stepping on the brakes throughout subject 2. However, it should be noted that you cannot stop halfway, that is, the speed is zero, and the test is judged to stop halfway if you pause for more than 2 seconds, and 5 points will be deducted at a time, and 10 points will be deducted at a time if the engine stalls due to improper operation.

To put it simply, subject 2 can apply the brakes, except for half-slope parking and starting, side parking, and reversing into the garage, the allowed speed is 0 and more than 2 seconds, like a right-angle turn.

If the vehicle stops due to heavy braking, you can step on the accelerator within 2 seconds to let the car continue driving, and you will not be deducted points.

In addition to using the brake pedal.

In addition to controlling the speed of the car, the hungry ant can also control the speed of the car through the clutch, and the trainees feel that the speed of the car is fast and cannot operate the steering wheel in time.

Or if you need a little reaction time, you can step on the clutch a little bit to make the power output not so strong, so as to achieve the effect of controlling the speed of the car.

Can I put on the brakes in Subject 2? Subject 2 can apply the brakes. Subject 2 exams.

There are places where you need to step on the brakes, such as when you start 100 points of parking at a half-slope start, and stop at the side of the burn.

At that time, the car reversed into the Bu Zhao Library.

Degree parking time. In addition to these points, other problems are not allowed to stop halfway during the project, that is, the speed cannot be reduced to 0. The following is the extended information of the type rent of Module 2:

1. Subject 2: Also known as the small road test, it is part of the assessment of the motor vehicle driver's license and is the subject of the field driving skills test.

The test items include reversing into the garage, side parking, ramp fixed-point parking and starting, right-angle turning, and curve driving. 2. Basic operation: Subject 2 requires students to master the basic driving operation essentials and have the basic ability to control the vehicle.

Proficient in the basic methods of driving on the site and the road in the field, with the ability to reasonably use the vehicle control parts, correctly control the spatial position of the vehicle movement, and be able to accurately control the driving position, speed and route of the vehicle. 3. Failing the subject 2 test: The applicant needs to pay the make-up examination fee at the DMV first, and according to Article 37 of the "Regulations on the Application and Use of Motor Vehicle Driver's License", each subject will be tested once, and if the test is not qualified, it can be re-examined once.

During the test of subject 2, you can gently apply the brakes, but do not use too much force to cause parking, and you can step on it appropriately when practicing to grasp the braking strength. Right-angle turning operation skills: pass through idle speed in one gear, do not refuel; Before entering the right-angle bend, try to stay away from the exit point of the tor bridge; When the center of the triangular window on the front window near the protrusion coincides with the protrusion, hit the steering wheel to the side of the protrusion.

When the front of the car turns to the new side and does not jerk backwards, special attention should be paid to the right front wheel not to press against the right side of the road. Curve driving operation skills: keep the whole process of driving in one gear, and do not rush in the direction; Try to make a big circle when entering the corner, and when you go to the right corner, the right wheel is close to the edge line on the right side of the road, and vice versa.

Side parking operation skills: sitting posture should be correct, which plays a key role in judging the accuracy of each point; When entering the parking area, keep to the right side of the road as far as possible, but do not press the yellow right edge line to avoid reversing too far behind and pressing the line. Ramp parking and starting operation skills:

When the ramp stops at a fixed point, before going uphill, the speed of the car should be slightly faster, so that the car has a little momentum, and after the rear wheels go uphill, the speed should be reduced immediately to make the car slow down. Otherwise, if the speed is too fast, it is too late to adjust the relative position of the car and the sideline. Reversing warehousing operation skills:

Control the driving speed and idle in 1st gear or reverse gear throughout the whole process, and drive at what speed you start; Control the timing of steering, observe carefully during reversing, grasp the key points of steering, and steer in a timely manner; Control the driving route, during the test, the driving route of Chahong car mainly depends on the speed of rotating the steering wheel and the driving speed, when reversing, to look at the sideline, correct the direction in time, so that the car remains upright into the warehouse.

Subject 2 exams.

There are places where you need to step on the brakes, such as when you start at a fixed point in the middle of a slope, when you park in the side direction, and reverse into the garage.

You will need to apply the brakes when you park. However, in addition to these items, it is not allowed to stop in the middle of the project, that is, the speed cannot be reduced to 0. Subject 2, also known as the road test, is a motor vehicle driver's license.

Part of the assessment is the field driving skills test subjects.

The test items include reversing into the garage, side parking, ramp fixed-point parking and starting, right-angle turning, and curve driving. Rolling rock.

If there are any of the following behaviors during the examination period, the Yuyuan examination of this subject will be terminated, the results of this subject will be invalidated, and the examination will be rescheduled:

1. Answer the mobile phone and check the pager.

Target; 2. Disrupting the order in the examination room;

3. Loud noise and disobedience to the management of the staff.

Secondly, if there are any of the following behaviors during the examination, the qualification for this examination will be cancelled (the results of other subjects that have passed the examination will be invalid, and the application file of the motor vehicle driver will be cancelled):

1. Reading biographies, bringing materials or books;

2. Talking to each other in the examination room, looking left and right;

3. Instructing others to take exams;

4. Coaches or other personnel are instructing outside the field;

5. Impersonation and fraud;

6. Set up signs or electronic instruments related to the examination on the test vehicle.

At present, the requirement of most examination rooms is that the candidate still lifts the clutch half-up.

If you don't allow the use of brakes, I don't think you need to take the second subject; To put it simply, if you don't allow the brakes, you'll have a problem starting halfway uphill, just with the handbrake.

It is still a bit difficult to complete the slope with the cooperation of the clutch.

Again, if the brakes are not allowed, you are like a reversing project, and the difficulty of the side parking project is a bit high; Not everyone can use inertia to park the car, and the purpose of the driving test is to make the student proficient in driving the car, not to let the student fail the course.

Most test rooms do not allow students to stop in the middle of the program, not that the use of brakes is not allowed; If you stop for too long in the middle of the road, you will be deducted 5-10 points. The function of the brake is to slow down and stop, and there is no problem to slow down simply by braking.

OK.

The subject 2 exam is divided into five items, each with different test requirements. During the test, the speed of the vehicle needs to be controlled by braking, especially when stopping and starting at the third ramp, if the vehicle cannot be stopped, points will be deducted. The relevant extensions of the Module 2 exam are as follows:

2.Subject 1 exam items that need to be braked: Subject 1 exam requires brakes in some places, such as when parking at the designated point at the beginning of the half-slope, when parking at the side position, and when reversing into the garage to park.

However, in the process of other items other than these points, it is not allowed to stop halfway, that is, the speed can not be reduced to the purpose of the subject test: the motor vehicle driver's license subject two test is to enable the motor vehicle driver to master the basic operation essentials, practice the basic control ability of the vehicle, rationally use the vehicle's control mechanism, correctly control the position of the vehicle movement, and accurately control the driving position, speed and route of the motor vehicle.