Start KCC, can anyone tell me how to run in a new car, and some people say no

1. The car should not start too violently. 2. The speed does not exceed 120 kilometers per hour 3. In winter, it should be warmed up for about 5 minutes before starting 4. If you have leisure time, take a look at the engine and check the oil level height. 5. Pay attention to abnormal noises when driving, and stop immediately to check if there is any.

6. If you don't give points, just say this. Take care of your car, I wish you a good mood!

Hello, the new car within 3000 kilometers belongs to the run-in period, the new car run-in period needs to control the speed and engine speed, to avoid abnormal wear and tear of the engine, the speed control within 100km h, the engine speed control within 4000 rpm is better.

Hello, the new car has a certain run-in period, the main thing is not to drive at high speed, the engine speed is below 3000 rpm, to minimize sudden braking, and there is to do a good job of the first insurance!

Now the mechanical parts of the car are finely machined, so there is no need to run in deliberately, as long as there is no violent driving, the vehicle is driven at a constant speed, the speed does not exceed 3000 rpm, and the speed is controlled within 100.

Hello, the new car still needs to be run-in, generally as long as the speed does not exceed 100, and the speed does not exceed 3.

Generally, the run-in period of 3000 kilometers for new cars is in the run-in period, and it is recommended that the speed should not exceed 100 rpm, and the speed should not exceed 3000.

Now the new car has been run in well with the factory.

The mechanical part of the new car must be run-in, the run-in period is 3000-5000, and there is no problem if it is not run-in, and it is not too fast and fierce within 3000-5000.

The purpose of the new car run-in is the applicable performance of the machinery, etc., generally according to the kilometer calculation is not calculated according to the time, more than 3000 kilometers on the line, the run-in period can not step on the accelerator, can not bombard the accelerator, lightly step on the light, keep it at 60 kilometers per hour, try to avoid large movements or climb the slope.

Now the engine of a new car doesn't need to run in, but the brakes and the shock absorbers need to run in with each other to get it to the best condition.

In fact, it doesn't make much difference whether it is grinding or not I picked up the car in another place at the time, and it came back with 200 soars on the highway that day, and now it has been more than a year, and it is almost 15,000, no problem.

Why do you want to run in, it's up to you, you are like buying an Apple 5 mobile phone, some people put a box outside, some people paste a film, and some people use it directly.

For the first 5,000 kilometers of the new car, the speed does not exceed 3,000 rpm and does not exceed 105 yards, and it is fine. After the first guarantee, pull the high speed.

If you drive 20,000 kilometers a year, it will only be 200,000 kilometers in 10 years, and 300,000 kilometers in 15 years; Normal maintenance, 400,000 kilometers do not need to be overhauled.

Are you going to drive this car to the end of life? Although it is usually scrapped in 15 years, the state is not mandatory now, as long as it is not a business car, a private car, a car, and the car is in good condition, you can continue to drive.

Enjoy your life with a car and don't get too tangled.

At a speed of around 80 per hour, do not drive vigorously, collapse the throttle and brakes, and run in to 3500 km/h.

The break-in of a new car mainly refers to the engine and transmission. The engine and gearbox are all metal parts, and although the organic oil and gear oil lubricate, there will still be wear and tear between the parts, and metal chips will still be generated. The oil drain bolts of the engine and transmission are magnetic and can absorb metal debris, but the intense operation may roll the metal debris onto the parts and cause irreversible secondary wear, thus affecting the life of the vehicle.

-500 km should not exceed 60km hours, for the initial run-in, the speed should not be too fast at this time, generally below 70-80 km, the speed should not exceed 2000 rpm. 500-1000 km is the mid-term run-in, the maximum speed can be appropriately increased to reach 90-100 km, and the speed is still below 2000 rpm. Increasing the speed appropriately will not only not affect the engine, but can promote the running-in, and you can see if there is any abnormality when the speed is increased again.

1000-1500 km is the later run-in, and the speed can be increased to less than 120 km. Because running-in is a gradual process, it must be gradually increased. The speed should not exceed 3000 rpm.

Generally, the 4S shop will change the new car for free at about 1500 kilometers (depending on the manufacturer, the number of kilometers is slightly different), and the engine oil is once, don't miss it.

2. When all cars are driving at low speed, the actual burden is greater than that of medium speed driving, so the run-in period should not be run in below 60 kilometers per hour for a long time. The speed must be increased gradually. At the same time, if you have been running at a speed of 80 kilometers per hour after the run-in period, a sharp increase in speed will make the new car unadaptable, so it is necessary to gradually increase the maximum speed during the run-in period.

3. Do not drive at a fixed speed for a long time during the run-in period, and there should be a speed change.

4. Avoid sudden braking and rapid acceleration during the running-in period.

5. When starting the car, pay attention to slow acceleration, do not accelerate sharply, and do not have trailers and other operations that overload the engine.

6. Pay attention to the reduction of fuel, lubricating oil, coolant and other liquids at any time, leakage and other problems, and deal with them in time.

7. If it is a cold area, try to avoid low temperature and cold start.

8. After the running-in period, it is necessary to replace the three considerations regularly, and the conventional practice is to replace the three considerations for 5000 kilometers.

9.It is recommended to maintain an economical speed of 80-90 km/h on a regular basis to be the most cost-effective. And be sure to press the manufacturer.

Required marking for refueling.

10. The automatic transmission car, because it cannot be manually shifted to determine the specified gear, can only be achieved by driving speed.

In short, the run-in should be driven at a constant speed, and the levels of 30km h, 60km h, 80km h, and 100km h must be stable.

Does the current new car still need to be run-in? Regarding the run-in period of a new car, you may have heard a lot of such words: the accelerator and brake should be gentle, not too fast, do not go at high speed, and try to keep moving forward at a constant speed, otherwise it will hurt the vehicle engine and so on.

But there are also many old drivers who say that it doesn't matter, rest assured to drive boldly, and now there is no run-in period for new cars, and they can be used normally at will. So what should we do with our new cars, and do new cars need a run-in period?

The degree of fit between the various parts of the new car needs to be run-in.

Now the manufacturing process of automobiles is indeed much more advanced than before, and it will be run-in in advance before leaving the factory, and there is no need to go through a complex and long run-in period as before, but this does not mean that there is no need for run-in at all. When a new car is just starting to be used, the fit between the various parts is relatively jerky, and there will still be some debris that is not completely polished and smooth, which requires a certain run-in period.

There is also a need for a run-in between people and cars.

When you just get a new car, the owner also needs to have an adaptation process to understand and familiarize yourself with the performance of the vehicle, which is also the run-in period - the run-in between people and cars. Before fully mastering the nature of the vehicle, it is recommended that the driver should drive cautiously to avoid misoperation, and the speed of the vehicle should not be too fast, so that he can also give himself a time to react.

During the run-in period, the vehicle should not drive too fast, of course, there is no problem at all on the highway. Don't brake too hard, take a little care. In fact, these matters should be paid attention to even after the run-in period.

In addition, the new car is within 5000 kilometers, because there are impurities falling, the oil is easy to become dirty, so we need to pay attention to the number of kilometers of the first insurance, half a year or 5000 kilometers to change the engine oil, to provide new lubricants for the engine. In short, when you get a new car, although you don't need to be careful, you can't do it casually, and you still have to take care of the vehicle.

It is also needed, the run-in period of the new car is generally about 3000 kilometers, the speed of the run-in period can not be too high, generally within 90 kilometers of hours, do not drag other vehicles, do not drive with full load.

Hello, when the new car needs to run in, the general run-in time is 3000 kilometers for three months, that is, the time to do the first insurance, in the run-in period, the speed can not be too fast, try to maintain a constant speed, do not foot throttle car try not to load, manual transmission, frequent shifting.

At the current level of manufacturing technology, there is no big problem for new cars to run in. However, it is still recommended to pay attention to the first 5,000 kilometers of running-in period after buying a car.

First, the run-in of the vehicle hardware is smooth, such as the lubrication of the cylinder, the run-in of the transmission system, and the stress reduction of the frame floor.

The second is the run-in of various systems between people and vehicles, that is, to be familiar with the operation and performance of new cars.

During the break-in period, it is best :

First, read the car manual several times, and understand the vehicle parts, performance, and indication symbols such as fuel quantity, maintenance symbols, wind and light switches, etc.

The second is to adjust the car according to your own habits and safety knowledge, such as seat height angle and rearview mirror.

The third is to drive softly, speed up slowly, turn slowly, turn frequently, observe more, try to speed below 100, and the speed will not exceed 2000 rpm for a long time.

The main thing in a new car is not to speed up quickly, and don't kill by braking! Now due to the development of technology, there is no need to pull the high speed! It is also not necessary to run to 4-5 thousand revolutions in every gear!

If you run a lot in urban areas, it is best to run at high speed once a week, which is conducive to the elimination of carbon deposits!

It depends on what brand of car, different brands of vehicles run in kilometers are different, some cars can be driven on the road at will without running-in, such as Cadillac, the official statement is that the new car should not be rushed to the accelerator and brake. There is no limit on speed and mileage.

What are the precautions for a new car?

How should a new car be run-in? Remember to pay attention to these misunderstandings, otherwise it will cause damage to your car!

The engine speed should not exceed 2,000, and you can not hold the car. Do not slam on the accelerator or brake suddenly.

1.Be sure to warm up before starting.

The so-called preheating is to give the engine a charge lubrication time, especially for turbocharged 4102 models, and the preheating time of 1653 is recommended to be at least one minute or more.

2.Start smoothly and accelerate slowly.

After the engine is ignited, the car should be warmed up first, and if the car is easily accelerated or braked sharply, it is easy to mode the car-related parts.

3.The engine speed should not be too high.

4.Don't hold one gear for long periods of time.

When driving, it is necessary to shift gears flexibly, so that each gear can be run-in, and the best way to increase the coordination of parts of the gearbox is to run in different road conditions.

5.Do not drive with heavy loads.

The load of the new car on the engine will increase, the greater the load, the damage will be serious, the lighter the car during the run-in period, the better, the first 100 kilometers are best to drive without load.

6.Do not brake unless necessary.

Emergency braking will produce shock loads on the chassis and engine of the car, so try not to slam on the brakes.

7.Do not drive for long periods of time at the beginning.

At the beginning of running-in, don't let the new car drive for too long or run long distances, start-stop is the best way to run-in.

8.Don't change the oil early.

Generally speaking, the original engine oil of a new car is a special oil for car running-in. Special oil has the advantages of low viscosity, strong heat dissipation, strong oxidation resistance, cleaning effect, etc., and some models also deliberately add abrasives to assist in running-in.

Is it normal for a new car to have high fuel consumption during the run-in period? Let me make it clear to you once that there are too many pseudo-theories, don't be fooled.

The speed should not be too high, generally 1500 to 1800 shifts, do not high-gear, low-speed or low-speed, minimize neutral gear coasting, there is no problem with high-speed running, but do not overspeed too high, the main thing in the run-in period is not to overspeed the speed, the rest is not too much requirement, the car is too high, the first box of run-in oil will accelerate the wear of the cylinder block, so the fuel consumption will increase.

To give you a suggestion, if you want to save fuel and run in, then take the car and let him idle for a few days, during which he will reduce the throttle or go to the highway. This is the fastest and most fuel-efficient method.

Neutral coasting is definitely not right, the run-in should be lightly stepped on the brakes, do not slam on the accelerator, regular maintenance is key, and the use of economic speed is correct at all times.

You've punished several fondant garden objects for several numbers, one.

Does a new car need to be run-in? Fortunately, the old driver reminded him in time, otherwise the car would be difficult to drive and scrap quickly.

It's not, it's just that the current engine oil and manufacturing process are much better, and you don't need to take the run-in period too seriously.

There is a run-in period in China, who knows who invented the word, and the car will be run-in when it leaves the factory, otherwise how to sell it.

You don't need to run the top speed, but you need to pull the high speed once, that is, to run on the highway. The speed should be between 100 and 120 km/h. Exceeding this speed will result in fines and demerit points.

"Pulling the highway" is not the same as "driving fast at the highway".

The true meaning of "pulling high speed" refers to the high speed at which the engine is pulled. That is, the speed of each gear is maintained in the range of 3000 4000, and each gear is maintained for a period of time, so that the piston and gear can try to work at high speed to achieve the purpose of pulling high speed.

Pulling the high speed is only to bring a certain run-in to the various parts of the vehicle, remember not to drive the car to the top speed, which will not only not play the purpose of pulling the high-speed, but will cause other problems because of the excessive run-in of the new car. Therefore, it is okay to drive at a speed of 100 to 120km h for a period of time, and there is absolutely no need to drive to 150km h, 200km h or even top speed to "pull the high speed".