Panerai What should I do if my Panerai watch gets into the water?

Hello, glad to answer for you.

Daily repair methods for water ingress in the watch:

1. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

2. If the watch accidentally gets into the water, you can also try it with silicone drying tablets. If water gets into the case, you can use a granular substance called silicone to put the watch in a closed container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again. (It is not recommended to use the above methods to deal with it, it is recommended to go to the after-sales center for maintenance).

If the water ingress is not serious, but there is a layer of fog in the watch glass, you can wear the surface face inward and the bottom shell outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

If the watch accidentally gets into the water, if there is a lot of water, you must go to the regular watch store to ask the master to clean and repair it. If it is only fogged up when the inner layer of the surface is heated, it means that only a little moisture has entered, then you can try to deal with it yourself. There are many ways to deal with it, but the simplest and most effective way is:

First pull open the watch handle (equivalent to opening the window), then put the watch under a 40-watt desk lamp 10 cm and shine it for 30-50 minutes (not too close), and then press upstairs"Doer"ways to do it. Wait for the moisture to remove before pressing the head of the watch in.

Watches are generally waterproof, and if you find that water has entered, send them to the after-sales service for treatment. Otherwise, the water stays inside the watch for a long time, then it will corrode the parts. bar.

Generally speaking, there are only three places where water can enter the watch movement: the handle (handle), the watch mask and the back cover. The waterproof device is also installed in these three places: add a rubber ring to the shank, add a rubber ring on the threaded edge of the back cover of the sealing ring, shank and other parts, and make the surface tight.

Water and fog into the watch has the greatest impact on the watch movement, and it should be dealt with in time to prolong the service life of the watch. If not treated in time, the residual moisture will easily cause the internal movement to oxidize and rust, resulting in inaccurate watch timekeeping and watch failure.

If the watch is seriously flooded, please send it to the repair center immediately for treatment, otherwise it will cause many metal parts inside the movement to oxidize and rust due to water vapor, causing greater damage. You can click on my homepage to consult, I hope to help you.

The after-sales repair location of Panerai watches is located in Room 707, 7th Floor, Block 1, Grand Gateway Center, No. 1 Hongqiao Road, Xuhui District, Shanghai, and lacks maintenance: mechanical watches should be maintained every 2-3 or so. If it is not maintained for a long time, a large amount of oil sludge will be generated and silted inside.

Friction between gears increases, causing slippage.

Hello, glad to answer for you.

1. If the water ingress is not serious, but there is a layer of fog on the surface, you can use toilet paper or flannel cloth that is easy to absorb moisture to wrap the table tightly.

If the watch is faulty, you can click below to consult the official** or click on the avatar to call for consultation**!

The solution to the water in the watch and the fog on the mirror:

Wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under the light bulb for about 30 minutes to eliminate the water mist inside, but do not put it close to the light bulb or bake it directly, so as not to cause the surface to be deformed by heating.

Wear the surface inwards and the bottom case outwards on your wrist to remove the mist from the surface after a few hours.

If you have silicone, you can put the silicone and the watch in water into a closed container, and after a few hours, take the watch out again, and the water mist in the watch will disappear.

If the water ingress of the watch is serious, it is best to send it to a watch shop to wipe the oil and eliminate the water in the watch to avoid rust on the parts of the watch.

Note: In order to prolong the service life of the watch, you should try to avoid fog and water droplets in the waterproof watch, do not wear the watch when washing your face, bathing, swimming and other "hydrophilic" activities, do not be affected by water vapor and hot vapor, and pay more attention not to be exposed to rain on rainy days.

What should I do if my watch gets water?

1. If the watch is soaked in water, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes, and the water vapor in the watch can be eliminated.

2. Put it in a rice jar and bury it deep in the dried rice for a period of time, if it is fast, you can see obvious results in one night.

3. You can use a granular substance called silica gel to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear.

4. Take a hair dryer to dry, and then apply a layer of transparent nail polish on it to avoid impurities and prevent rust.

5. If there is water vapor in the watch, you can wear the watch face inward and the bottom shell outward, and wear it on the wrist to eliminate the water vapor in two hours. If there is too much water in the watch, the case must be opened and scrubbed. If you are not sure to deal with it yourself, you should send it for repair in time.

Hello, the watch water generally has water mist or water droplets on the watch glass, and it will corrode the movement for a long time, resulting in inaccurate or non-time, so the earlier the watch water treatment time, the less damage to the movement, the recommended treatment methods are as follows:

Law. 1. Place the vent - dry the watch with a dry paper towel and then place it in a cool and dry vent for a few hours, and do not place the watch directly in the sun or dry, which is to prevent water mist from flowing into the movement.

Law. 2. Silicone drying - for the water inlet of the mechanical watch, you can use the granular substance of silica gel to absorb water, put the two in a closed container, and take it out after a few hours, and the water mist inside will be cleaned up; If it is a quartz point clock, you can take a few small pieces of calcium chloride, wrap them in gauze, and then open the electronic watch cover and seal it.

Law. 3. Wipe oil and remove rust - method 1 and method 2 can only clear a slight water mist, and for some more serious water ingress, these two work earlier, which is not enough for the rescue time of the movement, at this time it is best to find a professional watch repair center for ** maintenance, oil wiping treatment.

If there is only a small amount of mist, it is recommended to pull out the watch handle and put the desiccant around the watch handle, which will make the water vapor volatilize faster and the fog dissipate faster or use a 40w bulb to bake 15cm away from the watch for about 30 minutes, and the watch needs to be wrapped in a thin cloth. If there is too much water vapor in the meter, it is recommended to send it to the after-sales service or a reputable maintenance point within 72 hours.

Try to avoid letting running water touch the handle when washing your hands. Avoid wearing a waterproof watch above 100 meters when taking a bath or rinsing it with a faucet, as the watch may be flooded due to uneven water pressure on the watch. It is also important to avoid wearing the watch in the bathroom or sauna, as water vapor can affect the internal operation of the watch or damage the waterproof performance of the watch due to thermal expansion and contraction.

There is fog in the watch, which means that there is moisture in the watch. In general, although the watch is hermetically sealed, there are very small pores in the joints of the case, especially in used watches.

When washing hands or washing clothes or on rainy days, water can enter through these pores, especially the hot steam in the kitchen, which is more likely to soak into the case. In addition, the temperature is high and the humidity is high in summer, so if the watch is suddenly cold, the air containing more moisture in the watch will condense into mist or water droplets, which will stick to the watch glass.

If water enters the watch, please send it to the repair center immediately for treatment, otherwise it will cause many metal parts inside the movement to oxidize and rust due to water vapor, causing greater damage.

It is recommended to take a look at the watch repairer.

The quartz movement may not have a battery, and the mechanical movement may not have a mainspring or the movement is broken, so you can send it to the professional after-sales service center to see.

Hello, I'm glad to answer for you!

1. If the water ingress is not serious, but there is a layer of fog on the surface, you can use toilet paper or velvet silver acacia cloth that is easy to absorb moisture to wrap the table tightly.

If the watch is faulty, you can click below to consult the official** or click on the avatar and call for consultation**beat!