Operating procedures for ozone sterilizers used in pharmaceutical factories

Air sterilization method of Guangzhou Huanwei ozone disinfection machine for pharmaceutical factory:

1: Turn off the indoor ventilation and exhaust system.

2: Put the Guangzhou Huanwei ozone disinfection machine in the sterilization workshop, do not place it against the wall, and do not pile too much debris around the machine, so that the ozone can be quickly delivered to the corners of the workshop.

3: Turn on the power supply of the ozone disinfection machine (220V), the power indicator light of the machine and equipment is on, the current of the voltmeter is normally pointed to about 220, turn on the ozone work switch, the ozone working light is on, the ozone machine starts to work, the ozone flows out from the ozone outlet at the top of the machine, the ozone air sterilization and disinfection machine of Guangzhou Huanwei generally delivers ozone at a height of about 5-6 meters, the diffusion range is far, and the sterilization is thorough;

4: If the ozone machine needs to be unattended, you can set the microcomputer control switch according to your own requirements in advance, and the machine and equipment can automatically start sterilization and shut down automatically every day.

The general air sterilization and disinfection machine can choose the air source ozone disinfection machine. Guangzhou Huanwei HW-YD series ozone disinfection machine is mainly used for air sterilization and pipeline disinfection.

Pharmaceutical factory water treatment sterilization Guangzhou Huanwei ozone generator use method:

1: The ozone generator is installed in the air-conditioned room, the ambient temperature is required to be about 20 degrees, the humidity is lower than 80%, and the water treatment ozone generator is generally selected Guangzhou Huanwei oxygen source ozone generator HW-ET series.

2: Install the stainless steel gas-liquid mixing pump or ejector, and connect the ozone outlet to the stainless steel pump or ejector suction port with a silicone pipe.

3: Turn on the power supply of the ozone generator (220V), the ammeter has a current indication, then turn on the water pump, then turn on the ozone generator, the ozone working indicator light is on, and the raw water flows through the gas-liquid mixing pump or jet to the mixing tank to generate ozone water.

4: After the work is completed, turn off the water pump first, and then turn off the ozone generator.

How it works: Note: This method of operation is used for air treatment.

1. Place the product in a specific (stable, good heat dissipation) position in the field to be disinfected, in order to achieve the best ozone disinfection effect, please close the doors and windows, etc.;

2. Turn on the power supply, the voltmeter displays the current voltage, gently uncover the shell of the time relay, and debug the time relay according to the actual use needs of the disinfection time corresponding to the space disinfection (refer to the time relay installation and operation manual for specific operations);

3. Turn on the equipment switch, the indicator light is on, and the extension (according to the current air humidity, the greater the humidity, the longer the time, generally 1-30 seconds), and the ammeter shows the current current;

4. Adjust the ozone concentration according to the actual use needs, the ozone tuyere on the top of the machine has ozone output, and the unique large tuyere design makes the ozone fill the space in a short time to achieve better disinfection and sterilization effect;

Summary. Dear, ozone disinfection generally takes 30-60 minutes.

Dear, ozone disinfection generally takes 30-60 minutes.

Depending on the size of the space, it will also need to be disinfected for at least 30 minutes. Ozone disinfection is a relatively efficient disinfection method, but after ozone disinfection, the space must be separated by more than an hour before entering. Because the concentration of ozone disinfection is relatively high, if the ozone of Peifeng Huiguo does not dissipate cleanly and enters the disinfection environment, it may cause harm to the respiratory tract.

It needs to be ventilated for more than an hour, and the base date can not smell the obvious ozone smell before entering the disinfection environment.

1. First of all, place the ozone generator in a specific position (stable, good ventilation and heat dissipation) outside the room to be disinfected, check whether the ozone silicone hose and the ozone output port of the Paizai machine have been connected, and introduce the ozone delivery pipe into the space to be disinfected.

2. In order to achieve the best ozone disinfection effect, please close the doors and windows, etc., and do not have people indoors during disinfection.

3. Turn on the power supply, the voltmeter displays the current voltage, turn on the air pump switch, the air pump indicator light is on, and the air pump starts to work. There is a gas output from the ozone outlet.

4. Extend the time to turn on the ozone switch (according to the current air temperature, the greater the humidity, the longer the time, generally 1-30 seconds, the ozone dust code indicator light is on, and the machine starts to work, (the odorous oxygen generator above 15 grams needs to adjust the concentration knob to adjust the ozone output concentration,) The ozone silicone hose has ozone gas output.

An ozone generator is an air or water purification device whose primary role is to use ozone to kill bacteria and filter pollutants.

Compared with traditional sterilization and disinfection methods, ultraviolet rays, and chemical fumigation. These traditional methods will have the disadvantages of incompleteness, dead ends, large workload, residual pollution or peculiar smell, and may harm human health. If it is disinfected with ultraviolet light, it has no effect in places where the light does not shine, and has disadvantages such as decay, weak penetration, and short service life.

There are also shortcomings in the chemical fumigation method, such as bacteria and viruses with strong resistance to drugs, the bactericidal effect is not obvious.

Ozone is a light blue gas with a fishy smell, the atmosphere also contains a small amount of ozone, but the concentration is generally low at 002mg m3, according to authoritative experts: when the ozone concentration in the atmosphere is less than 02mg m3, it is not harmful to the human body, and it can also purify the air. In addition, the ultraviolet light with a wavelength of 184.9nm for ozone disinfection can convert oxygen molecules (O2) in the atmosphere into ozone molecules (O3), which has the effect of ozone sterilization, and O3 has a killing effect on mold.

O3 will quickly decompose itself into oxygen or a single oxygen atom due to its poor stability, and a single oxygen atom can combine itself into oxygen molecules without any toxic residues.

Ozone is also a non-polluting disinfectant, which can enter the inside of germ cells, destroy their tissue structure and oxidase, and play a bactericidal role. In addition to deodorizing, preserving and refreshing the air, ozone can also sterilize more than 90% of general natural diseases and 99% of intestinal infectious diseasesIt is suitable for disinfection of tableware that is not resistant to high temperature, and can keep fruits and vegetables fresh.

When the concentration reaches a certain level, the sterilization effect can be achieved. It can quickly spread to the entire sterilization space, and there is no dead angle for sterilization. And the higher the ozone concentration, the better the sterilization effect.

It can achieve complete sterilization, no residue, broad-spectrum sterilization, kill bacterial propagules and spores, viruses, fungi, etc., and can destroy botulinum toxin.

The ozone sterilization and disinfection effect is mainly reflected in its strong oxidation, and it is also a globally recognized green broad-spectrum and efficient disinfection and sterilizer. Ozone will automatically reduce to oxygen after 30-40 minutes, and there is no secondary pollution with chemical residues. It is widely used in drinking water disinfection, air disinfection in medical and health institutions, food factory processing, disinfection cabinets, fruit and vegetable detoxification machines, drinking water filling and disinfection equipment, etc.

For details, please refer to popular science books or check online for verification.

The ozone generator, at a certain concentration of ozone, can quickly kill bacteria, viruses and other harmful substances in the water and air, and is recognized as a broad-spectrum and efficient sterilization equipment.

Hello dear! I've helped you find the results, dear! The ozone disinfection machine can be used for the disinfection of the oxygen concentrator, but the following points need to be noted:

1.Make sure that the material of the oxygen concentrator can withstand the oxidation caused by the ozone disinfection machine, otherwise it may cause damage to the oxygen concentrator. 2.

Before using the ozone sterilizer for disinfection, the oxygen in the oxygen generator needs to be completely discharged to avoid the danger of mixing ozone with oxygen to produce the first stool. 3.When using the ozone disinfection machine for disinfection, it is necessary to operate according to the instructions on the instruction manual of the base tour oxygen concentrator to ensure the effectiveness and safety of disinfection.

4.After the disinfection is completed, the ozone in the oxygen concentrator needs to be completely discharged and fully ventilated to avoid pollution and harm to personnel and the environment. The above is all my reply, I hope to help you, I wish you a happy travel life