-
Anonymous users2024-02-07Press and hold the unlock and close buttons of the remote control for two or three seconds at the same time. Remote control matching method: 1. Open the door and don't close, the main driver's door can be opened here, and the car in the closed state is considered to be illegal intrusion, and it will not be decoded; 2. Insert the car key, switch it six times in a row, note that this continuous is the second gear and the third gear that the key is opened to so continuously, the second gear is the gear that the dashboard just does not light up, the third gear is the gear that turns on the indicator light in the car instrument, from the second gear to the third gear is counted once, from the third gear to the second gear is counted for the second time, the speed here must be fast, it must be done six times in about 3 seconds, the speed will not be unlocked if it is slow, note that the last gear must stay in the second gear, that is, the gear that the dashboard does not light up, The dashboard lights up the car, it will think that you want to drive, and naturally it will not be unlocked, and after six times, you will hear a tick twice (some visions may appear 3 times or 8 times to unlock), and the immobilizer is successfully decoded; 3. At this time, the new remote control and all the original remote controls are aimed at the anti-theft host (under the main driver's seat), press the unlock or close lock key any key to do so, press and hold for 3 4 seconds, and release it immediately after hearing the tick, which means that the remote control is successfully matched, put down this, and then change the remaining few remote controls in turn Just repeat the third step here, that is, press and hold the key to learn the new frequency, and you can complete the learning match without switching six times of decoding.
Note and remind: Note that the old remote control and the previous standby remote control must be matched here, otherwise the old remote control cannot recognize the new frequency after decoding, and it will be invalid and unavailable; 4. After the matching is completed, wait for 30 seconds, wait for the anti-theft device to memorize the newly learned frequency, and then pull out the key to realize that all remote control is available.
-
Anonymous users2024-02-06Summary. Hello, I'm helping you sort out the answers to your questions, please wait a while 09 Geely Vision, because the immobilizer is very power-intensive, so I want to ask how to turn off the immobilizer.
Hello, I'm helping you sort out the answer to your question, please wait a while Hello, 09 Vision anti-theft device is very difficult, this suggestion is to take off the anti-theft speaker to him.
Is there a problem that my car won't catch fire after being parked for a week?
Hello, the problem described to you must be like this, go to the Vibutan repair factory to do a leakage test, check whether it is the additional tung fitting in the leakage of the training, caused by the fault.
Don't have any other equipment installed?
Don't have any other equipment installed?
If no other equipment is installed, check the leakage caused by the aging of the electrical components, especially the module, which needs to be specifically tested.
I went to check today that there was no leakage.
If there is no leakage, then you will replace the battery with a battery, and the power storage will definitely be bad.
-
Anonymous users2024-02-05It is advisable to check if the remote anti-theft system is in silent mode. If it is silent mode, it is recommended to press the unlock button and lock button on the remote control at the same time to exit the silent mode before operating. If the vibration alarm function is not available, it is recommended to contact the workshop to adjust the sensitivity adjustment knob on the anti-theft control module.
There are two ways to release your car burglar alarm.
The first way is to open the trunk lid first, close and lock all the doors, insert and unplug the ignition key more than 6 times in 10 seconds, then clear the ID stored in the remote control, and then use the door handle to manually open and close the driver's side door, press the "lock" button on the remote control once, then enter the ID into the computer, and finally open the driver's side door to interrupt the ID input mode. The second method is to remove the battery of the remote control first, press the "lock" button on the remote control once, then replace the battery of the remote control, then close and lock all the doors, insert and pull out the ignition key more than 6 times in 10 seconds, this action will clear all the original numbers (id) of all remote control computers, and the overtaking lights will flash twice; Then turn the key to the "ACC" position and press the "LOCK" button on the remote control once. At the same time, the remote control computer will remember the ID of the remote control, and then open the driver's door to interrupt the ID input mode.
-
Anonymous users2024-02-04How to remove the Geely Vision anti-theft lock? Geely Vision ( Price |.)How to remove the anti-theft lock? There are the following steps to release the Geely Vision anti-theft lock, which are:
1. Open the rear compartment cover first, close and lock all the doors. Insert and pull out the ignition key more than 6 times in seconds to clear the ID stored in the remote control. 3. Use the handle in the door again and press the "lock" button on the remote control once.
4. You can enter the ID into the computer. 5. Finally, open the driver's side door and interrupt the ID input mode to unlock it. There is another method, and the steps are:
1. Remove the battery of the remote control first, and press the "lock" button on the remote control once. 2. Replace the remote control battery. 3. Turn off the morning and lock all the doors, insert and pull out the ignition key more than 6 times in 10 seconds, this action will clear all the original numbers of all remote control computers, and the overtaking lights will flash twice at the same time.
4. Then turn the key to the "ACC" position, press the "lock" button on the remote control once, and the remote control computer will remember the remote control to open the driver's side door to interrupt the ID input mode to unlock. @2019
-
Anonymous users2024-02-03How to solve Geely Vision anti-theft? Geely Vision ( Price |.)How to solve the anti-theft problem? The two ways to lift the Geely Vision Anti-Theft are as follows:
1.The first method is to open the rear compartment lid first, close and lock all the doors, insert and pull out the ignition key more than 6 times within 10 seconds, you can clear the ID stored in the remote control, and then use the door handle to manually open and close the locked driver's side door, press down the "lock" button on the remote control once, you can enter the ID into the computer, and finally open the driver's side door to interrupt the ID input mode. 2.
The second method is to remove the remote control battery first, press the "lock" button on the remote control once, then replace the remote control battery, then close and lock all the doors, insert and pull out the ignition key more than 6 times in 10 seconds, this action will clear all the original numbers (IDs) of all remote control computers, and the overtaking lights will flash twice; Then turn the key to the "ACC" position, press the "lock" button on the remote control once, and the remote control computer will remember the ID of the remote control, and then open the driver's side door to interrupt the ID input mode. More information is as follows:1
It is recommended to check whether Envision's anti-theft system is in silent mode, and if it is in silent mode, it is recommended to press the unlock button and the lock button on the remote control at the same time to exit the silent mode before operating. 2.If there is no vibration alarm function, then it is recommended to contact the service station to adjust the sensitivity adjustment knob on the anti-theft control module.
-
Anonymous users2024-02-02Summary. Hello, is it muted? First of all, the alarm effect of this car immobilizer is not very good, the sound of the immobilizer is small and there is no sensitivity, you can adjust it, go to the Internet to find it, and consult the after-sales service for specific operations.
Hello, is it muted? First of all, the vision of this car immobilizer stool alarm effect is not very good, the immobilizer sound is small and no sensitivity, you can bend the bush to adjust, go to the Internet to find it, the specific operation consultation after-sales socks Sakura.
In 10 years, Geely Vision immobilizer malfunctioned and could not get into the car.
Hold on. Hello, you are not in the right gear or in the right condition The most common pin is that you are undefeated in P or N gear Only these two gears can ignite and need to be in gear and lose the same bush when you step on the brakes and then start.
Geely's 2018 Envision X6 was launched in June 2018.
Envision is definitely more cost-effective than King Kong, the engine Vision is all-aluminum, generation CVVT variable valve technology, King Kong is an ordinary engine, the body is iron, but King Kong's engine technology is very mature, but the engine of Vision is more fuel-efficient than King Kong; The configuration is almost the same; In terms of space, the vista is one size larger than King Kong; In terms of safety, the Envision should be better than the King Kong, after all, the Envision is the first batch of domestic cars to pass the 4-star collision. I'm using Vision now, which is great and great value for money.
Hello, Geely Vision X6, the workmanship and materials of this car are still good, the quality performance is relatively stable, and there are not many fault complaints since the launch.
First of all, you get what you pay for, after all, this is a low-end model, and the displacement is not very large, so the climb is relatively difficult, which is very normal, you can't be very good when running.
The economic mode is more efficient than the ordinary mode, upshifting, shifting in advance (coming early), relatively more fuel-efficient, more suitable for running high-speed or long-distance, ordinary mode is suitable for congested traffic occasions, upshifting is slow, but the acceleration is fast, the general use of AMT gearbox models shift smoothness is not good, the impact is larger, but it is said that the smoothness in the economic mode is better, so many people also use the economic mode in the urban environment, you buy A1 AMT must remember to hand in the homework, I am also paying attention, remember to hand in the homework!!