How to set up a TPLink wireless router with your phone

Many people don't know how to operate a mobile phone, how to set up a TPLlink wireless router, now I will explain to you how to use a mobile phone to set up a TPLink wireless router.

1.First we need to open the browser on our phone, search for the connected router, and then connect. After the connection is successful, enter the router manager address in the browser and the default admin and password in the login window.

2.Once you have successfully logged in, there is a setup wizard option on the left side of your computer, and when you are done, click Next.

3.After clicking on the setup wizard, then in the box that pops up, select Use Let the router automatically choose how to surf the Internet, and then click Next.

4.After that, use the dial-up method to go online and select PPPoE (ADSL Virtual Dialing), and then click Next.

5.Click to enter the wireless settings, and you will see that the SSID is the meaning of the wireless name, and the PSK is the meaning of the wireless password, and a password of more than eight digits is required. Once the setup is complete, restart the router.

Extended information: A wireless router is a router with wireless coverage that is used for users to surf the Internet.

A wireless router can be seen as a device that sends broadband network signals from the wall of your home to nearby wireless network devices (laptops, Wi-Fi-enabled mobile phones, tablets, and all Wi-Fi enabled devices) through the antenna.

Popular wireless routers on the market generally support four access modes: dedicated line XDSL cable, dynamic XDSL, and PPTP, and it also has some other network management functions, such as DHCP service, NAT firewall, MAC address filtering, dynamic domain name and other functions.

The steps to set up a TP-Link wireless router with a mobile phone or close the morning are as follows:

1. Turn on your phone and tap Settings.

<>3, open the mobile phone is best to come with the browser, the address bar entered.

4. Enter the username admin and the password is admin.

5. Go into the interface to zoom in and find the setup wizard.

6. Follow the prompts and click Next.

7. Choose the Internet access method, China Telecom Mobile Unicom directly selects PPPOE, and then connects the router to the dynamic IP below, while large companies generally use static IP.

8. Fill in the password provided by the operator.

9. Set up wireless, the wireless name can be changed, and the password can be punctuated, numbered, and lettered.

10, Click Restart.

1. Step 1: Open WLAN in the mobile phone settings-WLAN interface and find the name of the wireless router.

2. Step 2: Click on the wifi name to connect.

4. Step 4: After entering the wireless router management page, we will be asked to set the administrator's secret code, and click OK after setting.

1. Connect the router to the network cable, power on, turn on the wireless function of the router 3. Open the browser of the mobile phone, enter the address bar This is the IP of the TP wireless router) 4. Enter the username and password admin The password is also: admin (only for new routers, if it is used, then press and reset it for a few seconds and then restart).

5. Enter the interface, find the setup wizard, and next.

6. Select the Internet access method, and then the next step.

China Telecom Mobile Unicom directly selects PPPoE

Below the router, select the dynamic IP of the router

Large companies generally use static IPs

7. Fill in the broadband account and password.

8. Set the name of the router, select the encryption method and set the password9. Finish, restart it.

The phone is connected to the wireless router you want to set up (i.e., connected to the wireless network WIFI issued by the router).

Open a browser on your phone and enter it in the address bar.

Enter the management interface, enter the network account and password, then enter the WiFi ID and password, and click "OK" in the lower right corner.

On the left side, you can view the connection port, limit the network speed, and so on.

System Administration" screen, you can change the login password.

Finally, click "OK" and press it to use.

How to set up a TP-Link wireless router phone?

Here's how to set up a router on your phone:

1. First, connect the router and the broadband modem with a network cable, and the connection method is to connect the LAN port of the broadband modem with the WAN port of the router through the network cable.

2. After the hardware is connected, use the mobile phone to connect to the wireless signal of the router, then open the mobile phone browser, enter the login address and login password of the router, and select Quick Settings after logging in to the background.

3. Then fill in the broadband account number and password as required.

4. Then set the wireless name and password to save and then the router can be used normally.

Plug the broadband modem or home network cable into the WLAN port of the router, and then connect the mobile phone through the wireless network. You can also use your mobile phone to open the browser, enter the address of the router management page in the browser address bar, you can refer to the manual to find it, generally.

2. After entering the page, you will be prompted to enter the management account, which also needs to be found in the manual, and the general account password is admin.

3. Click the setup wizard, follow the prompts on the page to set up broadband without PPPOE dialing, and enter the broadband account password.

4. According to the prompts on the page, check to turn on the wifi network, and set the password, after completion, click Next, and the device will automatically restart.

Open the browser of your mobile phone, enter the address of the router in the address bar, and you will enter the router settings. The latter can be set up by referring to the router manual.

How to set up a TP-Link wireless router phone?

Hello, you just need to enter the **, username and password after the router to enter the router settings page - select pppoe - enter the broadband Internet account and password - set the wireless password, etc.

You can log in to the online business hall of Anhui Telecom to buy mobile phones, and you can get a high phone bill for contract machines!

The computer is set to automatically obtain the IP address, and connect the computer to the LAN port of the router with a network cable.

Enter the web management interface of the router on the computer, and generally the default management address of the router is or enter the corresponding account according to the instructions on the back of the router to enter. If you can't enter, press RST to restore factory settings and enter again.

The WAN port of the router is configured for external network access. If it is a static IP address, select a static IP address and fill in the parameters provided by the network operator, such as IP address and DNS. If it is ADSL, select PPPoE and fill in the corresponding account and password.

The LAN port of the router can be configured by default or changed to a different CIDR block from the public IP range.

Turn on wireless and DHCP functions. Set the wireless name, channel, encryption method, password, etc.

Save and restart when the setup is complete. Then, connect the public network interface to the WAN port of the router, and other clients to the LAN port of the router. Turn on Wi-Fi on a mobile phone or other terminal, search for the wireless name, and enter the password you just set to connect to the wireless network.

Connect the main line to the router first, and then go to the computer first, and enter the wireless router settings page in the computer.

Follow the setup wizard to set your internet mode, and then try your phone.

Yours is a light thousand or a ** line! If it's a **line,That's an account and password.,To be entered into the router.,If it's light,It's divided into dynamic IP and static IP,Just enter it in the corresponding one。

Can I use a computer? Is the route set to autodial?

We have a model.

Here's the correct answer. Here's the correct answer. Here's the correct answer. Here's the correct answer. Here's the correct answer. Here's the correct answer. Don't listen to the, I studied all night, it's actually super simple.

I've been studying for a long time, it's actually very simple, the socket is on the WAN, **Enter the TP-Link router to change the IP address of the LAN to no problem, the reason is that the IP address of the router and the optical modem conflict.