How to set up WIFI on the Feixun router, that is, you can connect the mobile phone

Set up your wireless router again. Does the cat connect to the wireless router, do you do this:

Plug in the wireless router, don't pick up the cat first, reset the wireless router (restore to the factory), and connect the computer to any LAN port of the wireless router.

Go to the settings page and set it in PPPoE (ADSL virtual dialing). Some routers want to clone the MAC address. Then set the SSID, encryption method, and password.

After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Fixun router setup wifi method:

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the username and password.

The default is admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Turn on the router's wireless function].

1. Select Wireless Settings --- Basic Settings.

2. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

1. Connect the [WAN port] of the router of Feixun and the network cable to the network port [LAN port] of the cat;

2. Turn on the wifi function on the mobile phone, search for the default wifi signal connected to this Feixun Luzhishen device, which will generally be displayed on the logo at the bottom of the router, after successful connection. Open the browser of your mobile phone and enter [, and then click [Quick Configuration];

3. After the Internet access method is detected, the Internet access settings will appear - fill in [Broadband] - [Broadband Password], and then click [Next];

4. Finally, set the [wireless name] and [wireless password] of the Feixun router, and then click [Save and Restart];

A router is a hardware device that connects two or more networks, acts as a gateway between networks, and is a dedicated and intelligent network device that reads the address in each packet and then decides how to transmit it.

A router can also be called a gateway device. The router is the network layer relay and the third layer relay task completed in OSI RM, which stores and packets the data packets between different network cleaning and friendly networks, and its main purpose is to separate the network in different logics.

2. After logging in, the "Quick Wizard Posture" setting page will pop up, click on the "Quick Rush Book Imitation Speed Wizard" option on the left side, and the Quick Wizard page will appear.

3. Select ppppoe in "Internet mode", fill in "Username": broadband, fill in "Password": broadband password, set "Network Name (SSID)" and "Wireless Password", and click "Save".

01 Open the login address at the bottom of the Feixun K1 router in the browser to enter the settings interface, and the [Terminal Management] option in the interface can limit the network speed of the Internet terminal; The [Wireless Settings] interface can modify the display name and wireless password of the router's wireless Internet access. The [System Status] option can see the running time of the current router, software version, etc.; The Parental Control option allows you to control the online time of the target terminal.

A good router has become a must-have item for modern families,FeixunK1Router in order to cater to the preferences of young people with light-colored design,Mirror polishing process,More high-end atmosphere,Complete functions、QoS、Firewall、Wireless bridging、Bandwidth control,MAC address cloning and other functions are not bad。 Let's share with you how to set up the Feixun K1 router.

1、First of all, you need to open the settings interface of the router,At the bottom of the router, there is generally a login address of the router,For example, the address of the Feixun router is [,Open it directly in the browser。

2. The router setting interface is divided into [Network Status], [Terminal Management], [Wireless Settings], [Function Settings], etc. First, go to the network status page.

3. If you need to limit the network speed of the Internet terminal, you can enter the [Terminal Management] interface and enter the maximum uplink or downlink speed of the target to achieve the purpose of speed limiting.

4. In the [Wireless Settings] interface, you can change the display name and wireless password of the router's wireless Internet access. If the router is dual-channel with 5G, you need to set a password twice.

5. After the settings are completed, click [Save] and restart the router to update the settings.

7. For example, in [System Status], you can see the running time of the current router, software version, etc.

8. In [Qi Do Parental Control], you can control the Internet time of the target terminal.

Can't you find FR605R? Don't have it in your phone's wifi?

Mobile phones are fine! Configure the same as a computer, and enter the gateway with the same browser.

The gateway address is not necessarily this, look at the instructions at the bottom of the route), and then set it accordingly, the account password and so on are exactly the same as the method set by the computer.

The downside is that the font size is too small, which is difficult to read clearly and accurate at one time.

Here's how to set the password for your wireless router with your phone:

1. First of all, the phone needs to turn on wifi and connect to the wireless router you want to set up.

2. The next two steps are the same as in the computer, open the browser, enter the IP address of the wireless router in the address, such as, and then click "Enter".

3. Open the user login page immediately, enter the correct account and password, and touch "User Login".

4. After the account and password are verified, you will enter the background management page of the wireless router, and the first thing to display is the "Status" page and navigation link.

5. Select "Device Information", and then scroll to the bottom of the page to see the detailed "Basic Device Information".

6. Select "Ethernet Interface Information" and scroll to the bottom of the page to see the detailed network and client information.

7. Select "WLAN Interface Information" and scroll to the bottom of the page to see the detailed wireless network configuration information.

Here's how to set up your router:

1. The broadband bus (the network cable from the cat) connects to the WAN port of the router.

2. Start the router device;

3. After starting the device, connect the wifi of the router with your mobile phone, open the browser, and enter it in the address bar to enter the wireless router settings interface.

4. An account and password to log in to the router appear in the settings interface, enter the default account and password admin

5. According to the setting wizard step by step setting, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

6. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

7. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed off the network.

8. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

There's an IP on the router that you use your phone to log in.

It's not easy to update the content, thank you very much, I hope you can understand and support] Now the function of mobile phones is becoming more and more powerful, many electronic products have been replaced by mobile phones, and the use of computers is not as good as before. Many people don't have a computer at all, in this case, how do we use our mobile phones to set up routers?

Steps to set up your router with your phone:

1.Before setting up the phone, plug in the power supply of the router and plug the network cable into the WAN socket of the router, if the WAN light on the router is flashing, it proves that there is a signal source.

2.Next, enter the mobile phone [Settings] - [Wireless Network], you can see that the router has automatically created an initialized wireless network, some Android phones need to check [Network Notification] to see, directly connect to this wireless network, no password is required, but you can't access the Internet for the time being.

3.Open the browser of the mobile phone, enter and open it in the address bar (the login address of different brands of routers is different, you can see the label or manual at the bottom of the router body).

Then you will enter a login interface, you need to enter the default initial username and password of the router, generally the initial username and password are admin, there are also some routers that do not have a password for the first time, and you need to create a password yourself. (If it's neither, then look at the labeling or instruction manual on the bottom of the router body).

4.After logging in to the router, you can enter the Internet access settings, select the Internet access method, generally PPPOE or broadband dial-up Internet access (you can also choose to let the router choose automatically), and then enter the broadband account and password given to you by the network provider, and click Next.

5.The next thing is to set up the wifi account and password, remember to turn on the wireless broadcast, otherwise you will not be able to find this wifi on the mobile phone, after the setting is completed, the mobile phone can be connected to the wifi Internet access.

Use your phone to change the wifi password.

If you find that your wifi network has become very slow and stuck, it is possible that your wifi has been rubbed by others, quickly pick up your mobile phone and log in to the router with the same methods and steps, enter [Wireless Settings] - [Wireless Security Settings] to change the password, and then restart the router.

1.Connect to the wifi with your mobile phone first, if the wifi of this router, as shown in the figure below.

2.After connecting, the address bar in the mobile web version is right.

to log in to the home page of the Phicomm router.

3.On the login page, enter your account and password as prompted, and then click Login, as shown in the following figure.

4.Choose the right way to access the Internet, here we generally choose PPPoE dynamic IP, set the wifi username and password, and click OK.

5.After clicking OK,This is the setting is complete,You can exit the Feixun router page,Connect your mobile phone or computer to the wifi to connect to the network。

The phone must be connected to the wifi of the road detector to set up the router. Phone Setup Router Steps:

The first step is to connect the mobile phone to the WiFi of the router;

Step 2: Log in to the IP address of the router (, generally default;

Step 3: Enter the login page, enter the account and password, and click OK.

Step 4: After the settings are completed, click OK;

Step 5: The setting is complete.

The router can be set up by hand-copying, and the method of setting up the router on the mobile phone is as follows: du

1. First of all, route zhi

and broadband cats use DAOs

The network cable is connected by connecting the LAN port of the broadband modem and the WAN port of the router through the network cable.

2. After the hardware is connected, use the mobile phone to connect to the wireless signal of the router, then open the mobile phone browser, enter the login address and login password of the router, and select Quick Settings after logging in to the background.

3. Then fill in the broadband account number and password as required.

4. Then set the wireless name and password to save and then the router can be used normally.

I don't know much about how to set up a Feixun router with a mobile phone.

First of all, you have to turn on your mobile phone wifi, which can be set up with wifi in the same area as him.

K2 settings page, Android, UC browser can't be opened, stop at password entry,

If the mobile phone is connected to a wireless network, there should be an IP address at the bottom of the router and enter the IP address in the mobile phone browser, and you can enter the settings page.