What is the reason why Midea electric pressure cooker screen flickering not working

It may be that the control board is broken and you need to find a professional to repair it.

Common faults and maintenance methods of electric pressure cookers.

1.Turn on the machine and heat it for a while, and the water jumps to keep warm before it is opened. There are several reasons for this failure:

a. The contact of the rotary switch (i.e. the timer) is not good, although it has been twisted to the cooking part, it is not connected, so that the circuit is only controlled by the insulation switch at 60 degrees.

b. Pressure switch.

Failure, not working, so that even if the timer contact is good, but in the case of pressure is not reached, the pressure switch has been misoperated (jumped away), and the circuit is in a state of insulation, and the water cannot be boiled.

2.As soon as the machine is turned on and heated for a while, the whole machine will automatically disconnect the power supply, and the light will not be on. This fault is mainly due to the thermostat at 145 degrees at the bottom of the pot.

Malfunction, malfunction. Disconnect the power supply before the temperature is heated, and when the temperature drops, it can be powered on, and the temperature control can be replaced.

Maybe the insurance inside is burned, and the two lines are different.

Replace the linkage switch on the side of the pot.

Mine is the same as yours, and it's the same thing.

I thought I had this problem.,It's also this pressure cooker.。。 The light keeps flashing, and then it just doesn't work. Sometimes it's good to turn it back on when the power is off. In the end, it's broken??? Kneel down and ask the great god for a solution!!

Fault content:

1. There are stains on the contact of the pressure switch. Wipe the dirt off with a clean cloth and clean the pants.

2. There is obvious rust at the conductive part of the pressure switch. Use sandpaper to remove the rust. But it can only last for a while, because the rusty place is very easy to rust again, and the best way is to replace the pressure switch.

3. After maintenance, the pressure is adjusted too low (less than 10kpa). It needs to be adjusted to 50 60kpa according to the standard.

4. The connection between the pressure switch line and the power board is not in good contact. It needs to be re-soldered or replaced.

The working principle of the electric pressure cooker is that the boiling point of the water rises when the pressure increases, that is to say, the temperature of the water boiling is higher than 100 at atmospheric pressure, so that when the water in the pot boils when the temperature is higher than 100, the cooking time will be shortened.

Select the inner liner of the electric pressure cooker, the stainless steel inner tank above 304 standard is the best, durable and safe, and meets the requirements of health and hygiene. If you stew the bones with a stainless steel liner for a long time, you won't be able to see the small scratches that come out of the rubbing.

But there is a problem, stainless steel heating has blind spots, cooking porridge is easy to paste! Therefore, there are very few rice cookers with stainless steel bottoms, and the bottom of the pot is best with an alloy composite bottom, with uniform heat transfer, cooking rice without sticking to the bottom, don't put it for a long time, it's not a big problem. Stainless steel is required for the production of aseptic products in pharmaceutical production.

Fault content: The pressure switch is out of order.

Fault phenomenon: There is a stain on the contact of the pressure switch.

Cause of failure and troubleshooting:

1. There are stains on the contact of the pressure switch. Wipe the dirt off with a clean cloth.

2. There is obvious rust at the conductive part of the pressure switch. Use sandpaper to remove the rust. But it can only last a little longer, because the rusty place is easy to rust again, and the best way is to replace the pressure switch.

3. After maintenance, the pressure is adjusted too low (less than 10kpa). It needs to be adjusted to 50 60kpa according to the standard.

4. The connection between the pressure switch line and the power board is not in good contact. It needs to be re-soldered or replaced.

In order to avoid the electric pressure cooker being energized, the electric knife bottle review will be held, and what will be the reaction when it is sent to settle down? Let's meet such a king, it's not so good to forgive and forgive, but his one doesn't, because she can't accept it, and she will always think of such a problem.

Midea's electric pressure cooker is powered on, and the indicator light starts to light up and flashes. All other key presses do not respond.

If all of them are flashed together, the top cover sensor connection cable is disconnected, and the top cover is disassembled and connected. The indicator flashes at intervals to indicate that the CPU has been detecting, and the temperature sensing resistance of the upper and lower covers should be measured separately in tens of K. This situation is generally caused by broken lines and poor contact.

In the current information age, I believe everyone is familiar with the phrase "dry rice people, dry rice souls, dry rice people have to use pots to eat", right? It is true that eating three meals a day will greatly improve our happiness in life, but the truth is that to hone your cooking skills, you must first start with choosing kitchen utensils. What I want to bring to you today is the most everyday beauty of the electric pressure cooker, it can be said to combine practicality and aesthetics, to meet the needs of life cooking is no problem, let's take a look at it!

Extra-large capacity. Don't underestimate the "power" of this electric pressure cooker, it has a lot of measurability! The large capacity of a full 5L can cook 2 bowls of rice at a time, and the use of 4-10 people is not a problem at all; If you move and invite friends to warm the pot, or get together with relatives to chat and eat at home, this electric pressure cooker can fully withstand everyone's appetite;

It is worth mentioning that Midea's electric pressure cooker is also equipped with a large-capacity steamer, which steams pastries and meat on top and cooks rice below, which can be completed up and down in just 2 minutes, which greatly improves the cooking efficiency. With this electric pressure cooker, we have the freedom to "steam and cook" with good food.

Multi-function valve.

In order to make it more convenient for users to use and enjoy more delicious food, Midea electric pressure cooker is equipped with a three-speed multi-function air valve, and the soup and rice with strong aroma adjustment and fast food adjustment are enough to make the delicacy dazzle our eyes. If you're a meat lover, use an electric pressure cooker to make yourself a melt-in-your-mouth crispy pot or juicy stewed pig's trotters: choose the "fragrant meat" function, and the gravy can continue to boil, so the stewed food is softer and more rotten, and it truly melts in your mouth.

The "fragrant rice" mode can be cooked out of wood-fired rice that both young and old love to eat, the rice grains are fragrant, and the finely cooked rice is chewy, ensuring that you want to come again after eating a bowl; Comparatively, the fast menu is more suitable for the elderly and children. 70kpa high-pressure fast cooking, 115 degrees high temperature provides abundant heat, and the food made is soft and nutritious.

One pot with two guts. In order to ensure that the ingredients of every user who uses Midea's electric pressure cooker are clean and guaranteed, Midea specially uses a pot of double gall on this product - dedicated to gall, and the meat and vegetables are separated to ensure that there is no flavor. The black crystal liner can be used for stewed soup and stewed meat, which not only conducts heat quickly but also heats evenly; The citrine liner is a special bile for cooking porridge and rice, which greatly ensures that the taste of our porridge and rice is sweet, and it will not stick at all.

In addition, the storage method of these two liners can also be said to be very space-saving, as long as they are stacked and put into the pressure cooker, they will not occupy any space, and it is not easy to lose!

SummaryNo matter how you look at it, Midea electric pressure cooker is a very suitable cooking helper for home kitchens. If you want to have delicious food, you can't go wrong.

If the technical conditions of the spinning process remain the same, and the value of the means of production remains the same, the spinning worker will still consume the same amount of raw materials and machinery of the same value in the same working time. In this case, the value that the spinning worker keeps in the product is directly proportional to the value he adds to it. He added twice as much labor in two weeks as in a week, and was therefore worth twice as much; At the same time, he used twice as much material and its value, and he lost twice as much machinery and its value, so that he kept twice as much in two weeks of production as he did in one week.

Under the established and constant conditions of production, the more value the worker adds, the more value he preserves. But he is able to preserve more value, not because he adds more, but because he adds it under conditions that are not transferable by his own labour.

Of course, in a relative sense, it can be said that the old value preserved by the worker is always in the same proportion as the new value he adds. No matter how much cotton rises from 1 shilling to 2 shillings or falls to 6 pence, no matter how its value changes, the value of cotton kept by the worker in one hour's product is always only half that of what it is kept in two hours. In the second place, if the productivity of his own labour is changed, increased or decreased, then he spins more or less cotton in an hour of labour, for example, than in the past, and correspondingly, the value of the cotton which he has kept in the product of an hour of labour.

But in any case, the value of his two hours of labor was always twice as much as that of an hour of labor.

It may be a bad contact, or a short circuit.

Behind the Mpemba phenomenon, a cup of cold water and a cup of hot water are placed in the freezer compartment of the refrigerator at the same time, which glass of water freezes first? "Of course the cold water froze first! I believe that many people will not hesitate to make such an answer.

Unfortunately, this answer is wrong. The mistake was discovered by Mpemba, a junior high school student at Magamba Middle School in Tanzania, Africa. One day in 1963, Mpemba found that the hot milk he kept in the freezer of his refrigerator froze before the cold milk of his classmates.

This puzzled him, so he immediately ran to the teacher and asked for advice. The teacher said easily, "You must be mistaken, Mpamba."

Unconvinced, Mpemba tried again, but the hot milk froze before the cold milk. One day, Dr. Osborn, Head of the Department of Physics at the University of Dar es Salaam, visited Mpemba's school. Mpemba mustered up the courage to ask the doctor his question.

Dr. Osborne replied, "I can't answer your question right away, but I promise to do it myself as soon as I get back to Dar es Salaam." As a result, the doctor's experiment was exactly what Mpemba said.

As a result, this phenomenon is known as the "Mpemba phenomenon". For more than 40 years, the "Mpemba phenomenon" has been recognized as truth to this day. It doesn't end there.

In 2004, Yu Shunxi, a girl from Xiangming Middle School in Shanghai, questioned this phenomenon. Under the guidance of Huang Zengxin, a famous science and technology teacher, Yu Shunxi and two other female students began to study the Mpemba phenomenon. They use sugar, water, milk, starch, ice cream and other ingredients to collect.

Summary. Pro-fault**: C6 Fault content: Pressure switch failure Fault phenomenon: Stains on the contact of the pressure switch.

Pro-fault**: C6 Fault content: Pressure switch failure Fault phenomenon: Stains on the contact of the pressure switch.

Cause of failure and elimination method: 1. The pressure switch touches the slag or has stains. Wipe the dirt off with a clean cloth.

2. There is obvious rust at the conductive part of the pressure switch. Use sandpaper to remove the rust and grind it out. But it can only last a little longer, because the rusty area can easily rust again, and the best way is to replace the pressure switch.

3. After maintenance, the pressure is adjusted too low (less than 10kpa). It needs to be adjusted to 50 60kpa according to the standard. 4. The connection between the pressure switch line and the power board is not in good contact.

It needs to be re-soldered or replaced.

All lights flashing in Midea's electric pressure cooker are loose in line contact. Beauty.

All lights flashing in Midea's electric pressure cooker are loose in line contact.

Midea electric pressure cooker line contact loose maintenance method: 1. The contact points are exposed, 2. Turn off the lights, 3. Repair it when the power is turned on.

See if the plug is loose. If this is not the case, send it to the maintenance department.

Summary. Midea's electric pressure on me. When using the power supply, its electric pressure gives me the lights are all flashing, which is normal starting work.

Then you press the Zeng formation, and at this time the lights will stop, and only the Zeng formation lights will flicker. Prove that the pressure cooker is the normal starting order, thank you for your question, I hope mine can help you.

Midea's electric pressure on me. When using the power supply, its electric pressure gives me the lights are all flashing, which is normal starting work. Then you press the Zeng formation, and at this time the lights will stop, and only the Zeng formation lights will flicker.

Prove that the pressure cooker is the normal starting order, thank you for your question, I hope mine can help you.

If all the lights are flashing at the same time, it means that the cable of the top cover sensor is open, just remove the top cover and connect. 2.The interval flashing of the indicator light indicates that the CPU has been detected, and at the same time, the temperature resistance of the upper and lower covers should be measured separately, which should be tens of K, which is generally caused by open circuit and poor contact.

After the Midea electric pressure cooker is powered on, the indicator lights are all flashing and dripping, what is the reason?

1. The power cord is dropped, the power button is turned on 20 times, and then half of the water is added to the pot, the lid is buckled, and the power is on. 2. The lid is not in place. 3. A small component in the base of the pot is broken.