-
Anonymous users2024-02-07If you are using a system administrator account, go directly to the Control Panel - Users - first remove the password - then check "Use Welcome Screen" under "Change User Login and Logout Methods" - "Use Welcome Screen".
-
Anonymous users2024-02-06Press F8 immediately after booting to the advanced options and then let go, select [Latest Correct Configuration] Enter; It is not possible to press F8 to enter the safe mode to restore the system or reinstall the system; If the reinstallation is also a crash, it is recommended to overhaul it.
-
Anonymous users2024-02-05Enter safe mode to fix it.
1. Enter safe mode.
1. On the system login interface, click the power button in the lower right corner, press and hold the shift key, then click Restart and keep pressing the shift key.
2. The repair interface appears on the screen, click Advanced Repair Options, Troubleshooting, Advanced Options, Startup Settings, and Restart in order. After rebooting, press F4 to enter safe mode.
2. Fix it in safe mode.
Right-click on the Start menu to open the Command Prompt (Administrator).
Enter the netsh winsock reset catalog prompt and restart the operating system.
Third, the problem remains. Press Win R to enter msconfig on the desktop in safe mode, open the system configuration, click Diagnostic Startup, and then restart the computer, which will automatically fix the problem. Fix the problem and start normally.
-
Anonymous users2024-02-04There are several possible reasons for this problem:
1.To see if the relevant hardware is loose, please carefully check the wiring of the hardware such as the graphics card, memory, and hard disk.
2.The hard disk wiring is faulty, please disassemble the case, look at the wiring of the hard disk, and plug in the hard disk wiring again.
3.If the hard disk has bad sectors, please take off the hard disk and mount it on other machines, and use the disk detection tool to check the hard disk to see if there are any bad sectors, if the bad sectors are in the partition where the operating system is located, then it will not boot normally.
-
Anonymous users2024-02-03System boot error, BIOS boot sequence network card boot instead of HDD0 boot, then check that the hard drive cable has been firmly inserted, insert the full installation version of the XP system system installation, Xiao Yandan please do not use the GHOST PE system under the check, did not enter the hard disk and partition table!
-
Anonymous users2024-02-021) Immediately press F8 to do not move to the advanced option to appear in the mega which let go, select "the latest correct configuration" Enter repair, not yet press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also dead, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall).
First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.
If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.
2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, driver family delay code, etc., to see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).
Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.
3) In terms of hardware, such as hard disks, memory, graphics cards, motherboards, etc., if there is a problem, if it is caused by hardware problems, it is recommended to overhaul it.
Have you installed anything lately?
Press F8 to enter safe mode and uninstall the recently installed software. >>>More
Tools Raw materials.
Computer. Method steps. >>>More
Maybe the reason why the system boots up and starts the planting program can try whether the security mode is the same and can't get in, if it's the same, it is a software or driver of Xin'an that can uninstall the problematic software in the safe mode caused by the automatic planting of the boot. >>>More
Prompt did not find the startup item, that is, did not find the hard disk or optical drive, at this time it should be not found hard disk, boot into the motherboard interface is not found hard disk so can not enter the system, the possibility is that the hard disk is damaged or not plugged in, you can try to re-plug the hard disk power cord or replace the data cable to solve, after excluding the data and power cord is intact or can not find the hard disk, it may be that the hard disk is damaged, listen carefully to whether the hard disk has the sound of hardware turning and stuck. In addition, the smell of power paste may be that the power supply is burned, and some power supplies can operate normally after burning some integrated circuit boards or capacitors. Finally, the possible correlation is that the power supply burns out and burns the hard drive, hopefully not.