What should I pay attention to when renovating the water circuit at home?

Home water and electricity renovation.

It is not an easy task, and the following three aspects should be paid attention to when carrying out home hydropower transformation: 1. Design the renovation plan in advance 2. Do a good job of supervision during construction 3. Pay attention to the quality of hydropower materials.

When carrying out the renovation of water and electricity at home, the renovation plan must be designed in advance, and the renovation must not be started blindly, otherwise the renovation work has begun, and I don't know what to do next, and the result is that until the final completion, there are still many things that I want to do, and if I don't design the plan in advance, I always need to add things in the middle of the construction, and the cost of hydropower renovation will often exceed the budget, and the construction period of the renovation will be extended. Before the transformation, the design of the renovation plan also includes the owner has a clear idea of the layout of water and electricity in his home, to determine where the electrical appliances at home are placed, the need to install a few more sockets and a series of problems, in the transformation do not have an idea today and a change of idea tomorrow, which will cause great inconvenience to the construction personnel.

In the home hydropower transformation, do not hand over everything to the construction personnel, in the whole transformation process, must do a good job of supervision, it is best to have someone to the construction site every day to check the construction situation, because the hydropower transformation involves safety issues, must be very careful, and the hydropower transformation is done best not to make changes, once there are any omissions and mistakes due to negligence in supervision, there is no chance of secondary modification.

When carrying out home hydropower transformation, we should pay attention to the purchase of first-class hydropower materials, and choose regular manufacturers when buying materials, there are many hydropower brands now, and it is best to shop around when buying materials.

The project of hydropower renovation at home is very complex, and there are many problems involved, so we should pay attention to the above three aspects when carrying out hydropower transformation.

Water circuit renovation is the most vigilant thing in the decoration process, I think it should be handed over to a professional master to rest assured! The most convenient thing I have ever experienced is that the 365 room is worry-free ordering, the fee is transparent, and the work is clean and neat.

Home hydropower renovation is not an easy task, in the home hydropower renovation should pay attention to the following three aspects: 1, design the transformation plan in advance 2, do a good job of supervision during construction 3, pay attention to the quality of hydropower materials.

When carrying out the renovation of water and electricity at home, the transformation plan must be designed in advance, and the construction must not be started blindly, otherwise the transformation work has begun, and I don't know what to do next, and the result is that until the final completion, there are still many things that I want to do, and if I don't design the plan in advance, I always need to add things in the middle of the construction, and the cost of hydropower transformation will often exceed the budget, and the construction period of the transformation will be extended. Before the transformation, the design of the renovation plan also includes the owner has a clear idea of the layout of water and electricity in his home, to determine where the electrical appliances at home are placed, the need to install a few more sockets and a series of problems, in the transformation do not have an idea today and a change of idea tomorrow, which will cause great inconvenience to the construction personnel.

In the home hydropower transformation, do not hand over everything to the construction personnel, in the whole transformation process, must do a good job of supervision, it is best to have someone to the construction site every day to check the construction situation, because the hydropower transformation involves safety issues, must be very careful, and the hydropower transformation is done best not to make changes, once there are any omissions and mistakes due to negligence in supervision, there is no chance of secondary modification.

When carrying out home hydropower transformation, we should pay attention to the purchase of first-class hydropower materials, and choose regular manufacturers when buying materials, there are many hydropower brands now, and it is best to shop around when buying materials.

The project of home hydropower Yinchang renovation is very complex, involving many problems, and we should pay attention to the above three aspects when carrying out hydropower transformation.

You can get it for free

Hydropower renovation design is even more important! First of all, hydropower projects are hidden projects. Pipes should be buried in the wall or ceiling.

The early planning is not in place, and it is difficult to adjust and change in the later stage! Therefore, in the general renovation process, after the completion of the water and electricity, there will be a concealed engineering acceptance process. At this point, the water and electrical pipes are still exposed.

If you want to change them, they are still more convenient. There are still many considerations for hydropower retrofitting or hydropower engineering. The more professional ones are not one after the other.

High-power appliances and equipment require dedicated lines. For example, air conditioners, electric water heaters, etc., their socket power cords need special lines, which are directly opened and controlled from the electrical box, and then a group of lines are sent to the socket position, and are not used in series with other equipment in the middle. The choice of wire diameter should be correct, home decoration is relatively simple, general light wire, ordinary socket, high-power socket, of course, some large spaces may also need to meet the wire.

The weak current of the wall should be divided into boxes and slots, and cannot be the same pipe and slot, which will interfere with the weak current signal and generate a magnetic field around the strong current. Laying water pipes, if you can go to the ceiling, try to walk the ceiling pipes, of course, the cost may increase, but if there is a water leak, you can find the ground leakage as soon as possible, it is not easy to find, and it will have an impact on the downstairs when found. There are also some conventional specifications, such as the left hot and right cold water pipe, the strong current on the left and the weak current on the right, the live wire on the left zero line and then the right.

Precise planning of the retrofit and installation of indoor hydropower is crucial as it relates to the rationalization of water levels and potentials, as well as the ease of future use. Generally speaking, such as a decoration company, it will allow the designer to rub the business with the landlord in advance, and then draw special water and electricity construction drawings according to the landlord's intentions and his own work experience. But sometimes, in a hurry, we can't wait for the construction drawings or the landlord to install, in this case, although the design is not in advance, we have to communicate with the landlord to understand the interior layout, as well as the specific decoration location of household appliances and furniture.

This will facilitate future construction and future landlord use; It will not change and affect the use repeatedly. In the design of the waterway, the position of the main water valve, the front filter, water purification, circulating water, booster pump, circulating pump and a series of equipment to improve the quality of life should be considered, which is also a necessity for the future market.

When designing strong current in the circuit, the configuration of the main distribution box, the configuration of the control opening, and the line size arrangement of each area should be considered. It is important to note that many high-end products need to be electrified. For example, glass in high-end bathrooms requires power.

All strong electricity layouts should be reasonable and suitable for family life, while also considering the safety of the elderly and children. The design of weak current in the circuit should consider the design of smart home elements, such as wireless amplifiers, backgrounds**, monitoring, security equipment, etc. It should be noted that hydropower, especially in the process of electrical renovation, the model made by the renovation company is actually only aesthetically pleasing and may not be able to pass through the line if it is maintained horizontally and vertically, in fact,A national standard is a straight line between two points.

First of all, it is necessary to prepare the slotting, and then it is necessary to involve the piping device, and also pay attention to the inspection of the waterway pipeline. To choose the appropriate transformation method, at the same time, you can also use the slotting method for construction, pay attention to the direction of the line pipe, pay attention to the material of the line pipe.

Hydropower renovation is the profit point of the construction party, so you have to be mentally prepared in this regard, it may cost 3-5 thousands of oceans.

Remember the key points:

1.Wire: Jincheng brand wire, the specification is 4 square meters, otherwise it is easy to fire in the future.

2.Water pipes: Sichuan Road, Jinde hot and cold water pipes are good.

3.Try not to take the pipeline that you can't go, otherwise you will know how big the amount is when you settle the account. It would be nice if the line and piping meet the needs.

4.Before construction, remember to ask the construction team to give you a water and electricity renovation drawing, so that you can check the line and pipeline after n years.

I just finished renovating and hope the above is helpful to you.

This view only represents the individual netizens of China Kitchen and Bath Network, and does not represent China-chuwei Network.

The line goes to the top and does not go to the ground, but also horizontally and vertically, in order to facilitate future maintenance. When opening the transverse groove, the distance should not be greater than 300mm, and the wall will have the following name, so the transverse groove is too long, and the line will be squeezed.

Hydropower renovation because it is a hidden project, but also a project that is easy to make mistakes, if you do not pay attention to the decoration, it is easy to bring a lot of trouble to the future life, so whether you choose the decoration company or the hydropower company for hydropower transformation, we need to strictly control ourselves. So what details should be paid attention to in the renovation of decorative water and electricity? 1. The cabinet air conditioner takes 4 square separate circuits, the kitchen and bathroom each take a separate 4 square circuit, the lighting takes a square circuit, and the ordinary socket takes 1-2 square circuits, and does not use square wires, 2. The separation distance between strong and weak electricity is more than 30cm, and the spacing between strong electric pipes and heating pipes (pieces), hot water pipes, and gas pipes should be greater than 30cm; 3. The power supply, **, TV and other sockets in the same room should be at the same level elevation (except for special circumstances), strictly follow the principle of left zero and right fire ground wire, and the grounding wire should best use the yellow and green wire specified in the national standard; 4. The incoming line pipe is protected by a lock, the wire box should be laid smoothly, no elbows should be used, the bends should be hot bent or spring bends, and the pipes should be welded with PVC glue.

Strictly follow the principle of burying the pipe first and then threading, the place where the pipe cannot be buried at the top should be protected by a square wax pipe, it is strictly forbidden to bury the wires naked, and the ceiling wires must be fixed; 5. There should be no connector for weak current (the TV line should use a crossover), and the network cable is strictly forbidden to connect; 6. The open pipe must be protected by electric pipes, and when the three groups of wires enter the same wire box, another wire box should be set up. Where there is a lamp position in the ceiling, a wire box should be reserved; 7. After the completion of the circuit project, all sockets and light wires should be tested with electric bulbs to see if they are energized, and the strong and weak currents should be carefully tested, and whether it is a live wire. 8. After acceptance, an accurate circuit diagram should be drawn and handed over to the owner for preservation (it is best to be able to shoot ** to save). These 8 points you must pay attention to when hydropower transformation, here is the last point to remind you that after the completion of the waterway transformation, you must do a good job of suppression experiments, pyrotechnics remind to use a pressure machine to hit 6 to 8 atmospheres, keep for 30 minutes, no leakage.

It is best to have the property present to supervise the suppression test; Because some renovation teams will deceive the owner in this link.

1. Slotting of wires and lines.

After discussing the electrical functions and requirements with the owner, the person in charge of the construction will explain to the electrician and make the parallel and vertical lines slotted. Put away the switch socket bottom box.

The socket class is slotted 40 cm from the ground; The hanging air conditioning socket is slotted from the ground meter; The switch is slotted in meters from the ground.

The bottom of the switch and socket should be slotted with the horizontal line. The kitchen and bathroom must be slotted according to the designed use function.

2. Wiring of wires and circuits.

Material requirements: copper core wire above square meters, wire pipe above 16mm.

Wiring requirements: (1) Most electricians do not consider the strong and weak currents, switches, air conditioning sockets, and electrical sockets separately in the circuit wiring. Therefore, grooving saves a large number of processes.

2) The required wiring of strong and weak current is separated by 30 cm at a minimum; Air conditioning sockets are dedicated to wire groups of more than 6 square meters; 4 square meters of special group for electrical sockets; Switch more than square meters of special grouping.

3) The air conditioning line group is more than 2 meters from the ground. Electrical wiring group ground wiring, switch and lighting wiring group wall top wiring. The switch socket must be installed horizontally and vertically when the bottom is closed, so that the rear panel installation will be more flat.

4) The switch and socket of the kitchen must be arranged and installed according to the function of the kitchen cabinet design. After all the electrical lines are arranged, the person in charge of the construction should remember the layout and discharge size of the lines, so as to facilitate the installation of various home accessories in the later stage.

5) Now there are generally two kinds of PVC pipes: 6 points and 4 points. If possible, use 6 points and indicate it in the budget.

6) A 4-point pipe can only wear lighting wires, and a maximum of 3 wires can be worn in a pipe. 6. Wires that can be threaded through pipes, and a maximum of 3 wires can be threaded in one tube.

1. Positioning.

First of all, it is necessary to locate the circuit according to your use of electricity, such as where to switch, where to connect, where to light, etc., so that professional electricians will locate according to your actual requirements.

2. Slotting. After the positioning is completed, the professional electrician will open the wiring slot according to the positioning and circuit direction. The wiring groove is very particular, and the emphasis is on horizontal and vertical, but the standard practice is not allowed to open the horizontal groove, because it will affect the bearing capacity of the wall.

3. Wiring. The wiring is generally buried in the wire pipe. There are two types of line pipes: cold-formed pipes and PVC pipes. Among them, the cold-bent pipe can be bent without breaking, which is a good choice for wiring, because its corner is curved, the wire can be replaced at any time, and there is no need to open the wall.

4. Elbowing. The cold bent pipe mentioned above should be operated with a pipe bending tool, and the arc of the corner should be 10 times the diameter of the line pipe, so that it can be smoother when threading or removing the wire.