How to maintain tires and wheels for Baojun 310W?

Running over sharp objects can damage tires and wheels. If you have to run over these objects, you have to slow down.

Avoid touching the curb when parking.

It should be noted that:

Tyre pressure must be checked when driving cold. Readings after the tire temperature has risen cannot be used. The tires get hot after the vehicle travels for kilometers and do not cool down for 3 hours after stopping driving.

Using tires that are different in size than the original tires can cause damage to the tires and vehicle components by getting in the way of each other.

Be sure to dispose of end-of-life tires in accordance with local environmental regulations.

1. Check the tire pressure regularly: tire pressure is an important factor affecting the life of the tire, not too high or too low, and inflate the tire pressure according to the vehicle marking. It is important to note that the tire pressure changes with the temperature.

Affected by thermal expansion and contraction, the tire pressure will also decrease in winter, if the tire pressure is increased inappropriately, it will not only increase the fuel consumption of the car, but also accelerate the wear of the car tires.

2. Frequently remove the debris in the tread: the tire is used for a long time, and the tread is easy to be mixed with small stones, broken bricks and other debris, if these things are not removed in time, it will make you feel bumpy when driving, and the damage to the tire is great. Especially when driving at high speeds, it is dangerous to have a puncture caused by foreign objects in the tread.

Therefore, if you find small stones, you should use a key to pick them out and try to ensure that the tires are clean.

3. Check the wear and tear of tires: the traction and grip of new tires and old tires are very different, and those tires that are very worn are weak in grip and prone to skidding. Therefore, tires should be replaced in time according to wear and tear.

4. Carry out four rounds of rotation:

When the vehicle deviates or other abnormal steering, it is necessary to change the tire in time to avoid other abnormalities in the tire. The four-wheel rotation can ensure that the four tires of the vehicle are evenly stressed and avoid excessive wear.

5. Repair the tire in time: If the vehicle has nails, even if there is no air leakage, it is necessary to replace the spare tire as soon as possible, and then replace the tire with nails. Sometimes you don't need to change the spare tire before you tie the nails, let the tire repair master look at the nails first, if the nails are not big and not deep, you may not blow up the tires, so you don't need to change the spare tire.

6. Prevent kerbs and potholes: Some people like to park their cars on the shoulders, but in fact, this will squeeze the tires, which can easily cause the cord on the side of the tires to break, causing the tires to bulge. In addition, potholes on the road surface should also be avoided, because when the tire runs over the pothole, the tire will also be crushed.

The larger the potholes and the higher the speed, the more the tires will be squeezed, which can also cause the tires to bulge.

The second maintenance of the Baojun 310W is carried out when the mileage reaches 10,000 km.

The maintenance manual has a detailed list of vehicle parts involved in the three-warranty policy, including most of the parts such as engine, gearbox, suspension and body.

The warranty period for consumable parts is listed. For example, air filters, cabin air filters, gasoline filters, oil filters, tires, spark plugs, clutch friction pads, front and rear brake pads have a warranty period of 1 year or 10,000 km. The warranty period of fuses and relays is 1 year or 20,000 km.

Hello, 1, refer to the maintenance manual shall prevail, the above note 8,000 kilometers and time to maintain, to do routine maintenance.

2. Use 4S engine oil, oil filter replacement, and the other 2 filters, detection, and clearance, and another instrument to detect brake oil, plates, transmission oil, batteries, tank water, and tires.

Judging from the age of the tire, it is generally believed that the life of the new tire is 4 years from the beginning of the landing, and it is recommended to replace it after 4 years, regardless of the actual mileage. In terms of wear, when the tire has worn to the wear mark, indicating that the depth of the drain groove is less than a millimeter, the tire must be replaced immediately. Precautions for the use of tires:

Check the tire pressure regularly, and regularly check the tire for bulges, cracks, cuts, nails and abnormal wear. Check whether there are stones, nails and hard objects on the surface of the tire, and clean it in time to reduce the exposure of the tire.

Hello, how big tires can Baojun 310W change for I'm glad to answer for you that Baojun 310 can be changed for tires up to 205 wide. Tire replacement: Judging from the age of the tire, experience generally believes that the new tire starts to calculate the stupid before the landing, and the life of the belt is 4 years, and it is recommended to replace it regardless of the actual mileage in 4 years.

Judging from the wear situation, when the tires have worn to the wear mark, and the depth of the drainage groove is less than a millimeter, the tires must be replaced immediately. Precautions for tire use: Regularly check the tire pressure, and regularly check whether the tire has bulging, cracks, cuts, nails and abnormal wear.

Check whether there are stones, nails and hard objects on the surface of the tire, and clean it in time to reduce the exposure of the tire.

Is it okay to change the Baojun 310w to 16 inches?

Is it okay to change the Baojun 310w to 16 inches?

Hello, you can change to 16-inch wheels that are the same as the 730.

There is no effect on the power machinery.

This one doesn't have much of an impact.

Will fuel consumption increase?

Fuel consumption will increase.

What will happen to the speed?

This and normal driving is not a big gap is how fuel consumption will increase, if it is not necessary, I recommend that you do not change.

Baojun 310 maintenance method: the first maintenance is carried out in half a year or 5,000 kilometers, the second maintenance is carried out after 10,000 kilometers, and the third maintenance is carried out when each trip reaches 15,000 kilometers. For general inspection and cleaning, oil, air filters, gasoline filters, and air conditioning filters need to be replaced, among other things.

Car maintenance is very important for the car to eliminate hidden dangers, prevent breakdowns, slow down the deterioration process, and extend the service life. Preventive work that inspects, cleans, refills, lubricates, adjusts, or replaces certain parts of the main parts is also known as car maintenance. In addition to changing the oil and oil filter, the air air filter and gasoline filter should also be replaced during car maintenance

Replacing the air filter mainly means that the engine will suck in a large amount of empty air during the working process, and if the air is not filtered, the dust in it will accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can also cause severe cylinder pulling. The function of the air filter element is to filter out the dust and particles in the air body, and ensure that enough clean air can enter the cylinder.

The main purpose of replacing a gasoline filter is to provide clean fuel to the engine and filter out moisture and impurities in the gasoline. This optimizes the performance of the engine and provides optimal protection for the engine. Usually when carrying out car maintenance, the operator will do other inspections according to the specific situation of the car, and will also add other maintenance items, such as the inspection, cleaning and maintenance of engine-related systems, the positioning inspection of tires, the inspection of fastening parts, etc.

Millions of car purchase subsidies.

How to maintain Baojun 310 Baojun 310 maintenance method: the first maintenance is carried out for half a year or a trip of 5,000 kilometers, the second maintenance is carried out after 10,000 kilometers, and the third maintenance is carried out when each trip reaches 10,000 kilometers. General inspection and cleaning requires the replacement of oil, air filters, gasoline filters, and air conditioning filters.

Car maintenance is very important for automobiles, which can eliminate hidden dangers, prevent breakdowns, slow down the deterioration process, and prolong the life of use. Preventive work that inspects, cleans, replenishes, lubricates, adjusts, or replaces certain parts of a major part is also known as car repair. In addition to changing the oil and oil filter, you should also replace the air filter and gasoline filter during car maintenance

Replacing the air filter mainly means that the engine will suck in a large amount of empty air during the burial process, and if the air is not filtered, the dust in it will accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and the cylinder can also cause severe cylinder pulling. The function of the air filter element is to filter out the dust and particles in the air body, and ensure that enough clean air can enter the cylinder.

The main purpose of replacing the gasoline filter is to provide clean fuel for the engine and filter out the moisture and impurities in the gasoline. This optimizes the performance of the engine and provides the best possible protection for the engine. Usually when carrying out car maintenance, the operator will carry out other inspections according to the specific situation of the car, and other maintenance items will be added, such as the inspection, cleaning and maintenance of engine-related systems, the positioning inspection of tires, the inspection of fasteners, etc.

Millions of car purchase subsidies.