What does it mean that there is no more memory available to update the security information

Optimizer is very easy to destroy the operating system, I have used it to destroy my operating system several times.

Right-click on my computer, click Properties, click Advanced, click on the first setting, then click Advanced, click Change, click C:, click No paging file, (paging file is virtual memory, the above operation cancels the virtual memory of C disk) Click on a partition that rarely puts things and is large, such as E, F, G disk, click Custom size, the initial size is set to multiple of the physical memory, and the maximum value is set to 3 times the physical memory ("Popular Software" says that it is the best to be so big), click "Settings" to save the settings, all the way to OK, Restart, all right. This is the operation method of XP, other operating systems are similar to it, but there is a difference, you don't say what operating system you have to do so, this setting is the setting of the whole system, and all running programs have a certain optimization effect.

It seems that the virus was poisoned, refused access to the e-disk and forcibly shut down Jinshan.

Change it to kill the soft foreign potato slippery noodles are much better than Jinshan's hand macro is Zhaola.

Memory is like buffering, when you use the computer, the programs it runs have a certain size, and before the CPU processes it, it is put into the memory, so the memory is generally larger.

It can only be said that it may be a memory problem, or it may be a system or software problem.

It's hard to say that it's a hardware or software problem, because both software and hardware can cause a blue screen, you can start with the software to solve it first, think about whether you have installed or what software you have installed recently, and delete it. Use anti-virus software to completely disinfect the virus. In terms of hardware, you need to plug and unplug the following memory modules from the new one, and there is an important point that poor heat dissipation will also cause this situation, open the back cover, clean up the dust of the following fans, and see if the fan is not in good contact or simply does not rotate.

There is a system memory error, a driver problem, reinstall the system and install the driver once Don't gostHardware is generally not damaged (it is difficult in strong viruses), except for man-made damage Memory errors can lead to a blue screen, and graphics cards can also cause a blue screen.

It is recommended that you reinstall the system, and you want the system of rainforest wood wind, it seems that there is a problem with your drive. My notebook used to be filled with a deep XP SP3 like this, and then it would be nice to change to the rainforest wood wind, you can try it. I have installed systems for many brands of my colleagues' books, and later found that the rainforest has the most complete drive.

Give it a try!

It's all sixteen-digit address codes, and it's useless to research. That could be hardware or software.

It is recommended to use software to test the stability, everst is fine, memory, CPU one by one.

Memory error.

for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1

for %1 in (%windir%\system32\*.dll) do regsvr32 /s %1

This will take a long time, be patient, but it may take a reboot before the whole effect comes out.

On the desktop, right-click My Computer, and then click Manage. In"Services and Applications", click Services, and then close and stop the Windows Management Instrumentation service. Delete all files in the Winnt System32 WBEM Repository folder.

Create backup copies of these files before deleting them. ) to open"Services and Applications", click Services, and then open and start the Windows Management Instrumentation service. When the service restarts, these files are recreated based on the information provided in the following registry keys:

hkey_local_machine/software/microsoft/wbem/cimom/autorecover mofsn_ayt/blog/#pn4

This happens occasionally, it doesn't matter, leave him alone. Click 'Cancel' and you're done.

It's dangerous to appear often, and if you don't get it right, you have to reinstall the system.

When running some programs, sometimes a memory error message appears, and then the program is closed.

0x???The "0x??? referenced by the directiveMemory. The memory cannot be "read".

0x???The "0x??? referenced by the directiveMemory, which cannot be "written".

If there is an error in the system, just reinstall QQ.

If you reload, if you can't do it, you will step on it with your feet,,, ,,, step on it like jumping in a daup

Memory instructions cannot be read, which is a common problem in the use of computers, memory is a storage component on the motherboard, which is an important part of the CPU to communicate directly with and store the data and commands currently in use. When you type a command with your keyboard or mouse, the CPU interprets the command and loads the instruction or program into memory so that the program can be executed. Once there is a problem with the memory, the program cannot be executed, hence the warning of the "This memory cannot be read" error that we mentioned earlier.

Of course, the failure of "this memory cannot be read" is not necessarily a memory problem, but also a bug in the computer with a virus or Trojan horse and the running program itself. It's hard to tell what caused it, and it's hard to rule it out for a while, but it doesn't matter, press OK, cancel, restart, and you can do it. Interested netizens can try to solve the problem with the following methods:

1. The physical memory is too small, and the physical memory is increased; The memory and motherboard are not plugged in properly or other hardware is not compatible, reinsert the memory or change the socket; Dual memory is not compatible, you need to use the same brand of memory or only one memory; Inferior memory module or memory module is broken Replace the memory module; Set up virtual memory appropriately.

2. There are too many open programs, if there are too many documents or too many programs running at the same time, and there is not enough memory to run other programs, you should close the programs and windows that you don't use at any time.

3. There are too many programs that run automatically, close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods, general programs can be turned off.

4. Excessive fluctuation of mains voltage, or the use of inferior power supply on the PC, will bring damage to the memory, and replace the power supply with high power and high quality.

5. The PC chassis is full of dust, or the PC working environment is relatively humid, which will also cause abnormal operation. Dust removal in time.

6. CPU and graphics card heat dissipation problems, improve heat dissipation.

7. If there is a problem with the hard disk, scan to repair or replace the hard disk.

8. Driver problem: Reinstall and update the driver.

9. Illegal operation, the system cannot be executed.

10. Software damage and reinstallation of software; The software has bugs, patch or update to the latest version; The software is incompatible with the system: patch the software or try the compatibility mode of the system; There is a conflict between the software and the software If you have recently installed something new, try uninstalling it.

11. There is a problem with the system itself Sometimes the operating system itself will have bugs, so it is best to install the official update program in time and reinstall the system if necessary.

12. Virus problem anti-virus; Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

Memory error instructions are usually caused by a program running error, or a memory quality problem, or an XP vulnerability.

There is an 80% chance of general memory problems, and 20% of the system hardware is incompatible.

Let's take a look at what hardware you've recently replaced.

The system is redone, and if it doesn't work, it's a memory problem.