Is there a difference between the engines of the MU One X Isuzu 2 5 and 3 0?

The appearance, cylinders, common rail accessories, everything is exactly the same, and the difference is that the length of the piston and connecting rod, and the thickness of the piston are exactly the same, all of which are 94 mm, and the difference is that the piston length is 104 mm, and the piston length is 87 mm.

Jiangxi Isuzu MU-X engine is the 4J series diesel engine of Isuzu brand's top technology. If you change it to an 87mm piston and connecting rod, then it will become a displacement engine.

An engine is a machine that can convert other forms of energy into mechanical energy, such as internal combustion engines (gasoline engines, etc.), external combustion engines (Stirling engines, steam engines, etc.), electric motors, etc. For example, the internal combustion engine usually converts chemical energy into mechanical energy. An engine applies to both a power generation unit and an entire machine including a power unit (e.g

gasoline engines, aero engines). The engine was first born in the United Kingdom, so the concept of engine also comes from English, and its original meaning refers to that"A mechanism that generates power"。

There is a difference between the engine of Jiangxi Isuzu and the 4JK1 DDI overpressure common rail diesel engine, while the 4JK1 DDI overpressure common rail diesel engine.

The difference between these two engines is 1The maximum power is not the same, it is 100 3600, it is 130 3600

2.The maximum torque is different, it is 320 1800-2800, it is 380 1800-2800

Everything else is the same.

Which is better Isuzu or not?

Hello friend, a little better. If you are mainly a daily commuter, occasionally travel by car during the New Year's holidays (or even go to Tibet to go to the high-altitude Minqing or district), do not often go to heavy off-road, but are more concerned about the comfort of the car and the engine is silent, it is recommended to choose the Jinxiang version, and install a built-in rear anti-collision steel beam chassis armor. If you work freely and have free, often take wild roads and mountain roads to go off-road to dig pits, require the engine horsepower is strong enough, do not care about the engine noise Some bridges, and their own car budget is relatively loose, it is recommended to choose the drive power enjoyment version, both horsepower is enough, but also poor do not worry about the possible power attenuation problem, comprehensive fuel consumption is only an increase in the like.

I hope mine is helpful to you and I wish you a happy car! Thank you!

The design of the 4JJ1 engine and the RZ4E engine is relatively similar, and in the range of 1800 rpm to 2600 rpm, you can get a large torque output, the only difference is the maximum torque of the displacement limit.

If you are a senior off-road player, a group of big men come and go in the sand every day, then choose, Isuzu MU-X is equipped with a 4JJ1 engine, with a maximum horsepower of 177 horsepower and a maximum torque of 430N·m, which is a lot higher. And Isuzu's 4J series engines are notoriously durable, and there is no doubt about reliability and durability, but the drawback is also obvious - too noisy.

If you just like to travel by car, occasionally running on the sand and snow, then choose, the Isuzu MU-X is equipped with an RZ4E engine with a maximum horsepower of 163 hp and a maximum torque of 360 Nm.

In fact, the RZ4E engine appeared in the overseas market a few years ago, and there is no need to question the durability, after all, the diesel engine of Isuzu is still relatively reliable, and the noise control of the RZ4E engine is very good, and it is not even inferior to the gasoline engine.

From the point of view of practicality, I think it is enough, from the data point of view, the maximum torque is 360 Nm, and the early stage is 380 Nm, the later data is 420 Nm, from the torque point of view the displacement is already very close to the displacement, and from the vehicle and vessel tax, the displacement is definitely cheap.

Judging from the driving test report, the engine speed of the vehicle speed of 100km hour is 1800 rpm, and the corresponding 120km hour engine speed is about 2000 rpm, from the above data, the engine running speed is still very low, which correspondingly reduces fuel consumption, you know, the displacement of the Accord 100km per hour engine speed is also 2000 rpm, so it is recommended MUX.

This question depends on your actual needs, let's talk about motivation first, it must be fierce, if you are a player, it must be. Moreover, the machine has been out for a longer time, and the technology is relatively mature and stable.

Of course, the displacement is large, and the annual vehicle and vessel tax is relatively high, more than 400 yuan a year, and about 3,000 yuan a year.

If it's just an ordinary daily drive, if you don't play heavy off-road, it's enough. Fuel consumption is definitely more economical.

Isuzu's diesel engines are very good, look at those who use diesel engines in China, you know, Isuzu's machines use a lot.

So which displacement to get on depends on your specific car needs.

It's better to buy, because this car has very good performance, fuel consumption is also very low, and most importantly, it is very cost-effective.

Yes, of course, I only have 5 yuan in my pocket, so of course I chose it. Therefore, this issue is a question for people with disabilities to consider!!

I bought it, I advise everyone to look at other brands, I can't afford to hurt it.

Isuzu and, I think this one is better, obviously this one is more cost-effective, equipped with a powerful engine, and the appearance is atmospheric and classy, very good-looking.

Of course it's good, but it's 30,000 more expensive than the same configuration, I just bought it for three years and ran 90,000 kilometers, I compared it with my buddies and the fuel consumption of air conditioning in the city is 10 liters per 100 kilometers, less noise than the other. It's no problem to climb the slope off-road, and it's even better, personal opinion.

The value retention rate of the ratio is higher, and the value retention rate of Dimes pickup is not the same, and the ratio is high.

I bought enough, the fuel consumption is about 8.

Summary. Hello dear and happy to answer your <>

The Isuzu engine model is 4KH1N6MD. The engine model is the identification of the engine manufacturer for a batch of the same product in accordance with the relevant regulations, enterprise industry practices and the attributes of the engine, which is used to indicate the manufacturer, specifications, performance, characteristics, process, use and product batch information of the engine. Such as fuel type, number of cylinders, displacement and static braking power.

The above is the Isuzu engine model.

Isuzu engine model.

Hello dear and happy to answer your <>

The Isuzu engine model is 4KH1N6MD. The engine model is the identification of the engine manufacturer in accordance with the relevant regulations, the industry practices of the enterprise and the attributes of the engine, for a batch of the same product of a key limb, which is used to indicate the manufacturer, specifications, performance, characteristics, process, use and product batch information of the engine. Such as fuel type, number of cylinders, displacement and static braking power.

The above is the Isuzu engine model.

What is the reason why the new flame-out electronic valve of the diesel pump of the Isuzu Qingling engine has to be removed to ignite? How do I troubleshoot the problem?

In some cases, the fuel line and oil pressure are insufficient, and the electronic flame-out valve will remain closed, resulting in the diesel pump not working and the vehicle unable to start. At this point, the flame-out electronic valve needs to be dismantled to resolve the problem. To solve this problem, you first need to check whether the pressure of the fuel system and oil circuit is normal.

It is found that there is a leak due to insufficient pressure, and the corresponding parts need to be repaired and replaced. The pressure is normal but the problem persists, and Shuga needs to replace the flame-out electronic valve.

Jiangxi Isuzu MU-X engine is the 4J series diesel engine of Isuzu brand's top technology.