How to shave cleanly, what razor cleans?

Shaving well in the morning.

At this time, the face and epidermis are in a relaxed state, it is advisable to wash the face before shaving, and apply a hot towel to the face to make the pores and beard swell and soften, and make it easier to scrape. After applying to the face for about 3 to 4 minutes, gently apply soap or cleanser to the cheeks and around the lips, and wait a few moments to make the beard softer.

Wetting Start by washing your shaver and hands, washing your face, especially the beard. Moisture is the key to shaving, it will make the beard 70% softer than before. You can wet it in two ways:

Take a shower or apply a hot and humid towel for three minutes. Shower baths allow for plenty of moisture absorption, but a good thing becomes a bad thing when it's too much, and sweat in the bath will dilute the foam and reduce protection, so the ideal time to shave is a few minutes after bathing, while your pores are still dilated and your face is no longer dripping.

Shaving The facial beard grows in different directions, first understand the texture of your beard, and then shave along the wrinkles, which can shave off 80% of the beard, and then the opposite direction; Finally, check the areas that can't be scraped, such as the palate, Adam's apple, etc. It is worth noting that sensitive people are best to use a multi-bladed razor, which can reduce the number of shaves and reduce the possibility of allergies.

Two one-dollar coins··· One by one... Improve your hand skills again... Kill the boredom again...

In a situation like yours, you can't use the rotary one, because this type of hair will hurt your hair follicles. It is recommended that you choose Braun, which is a reciprocating design, this kind of razor only needs to be scraped once, and the three-in-one design does not need to be used to scrape back and forth. A thick, thick beard like yours is the most suitable.

And remind you that when you use this razor, you should shave in the opposite direction of beard growth, the effect is better!

In this case, it is recommended that you use a manual razor, such as Gillette's. Use shaving gel to soften your beard before shaving, and use aftershave water to soothe and shrink pores after shaving, so that it doesn't hurt you.

There are so many razors on the market, but I still like to use the German Braun, do not use to scrape back and forth, one-time scraping, will not hurt **, I personally recommend this.

I think it's still important to pay attention to the timing and method of shaving, and generally speaking, I recommend shaving after taking a shower at night to shave better. Then it is necessary to scrape in reverse, which is more suitable for ** and cleaner.

Philips's three-head rotary, shaving is super fast, generally a charge can be used for a month, I shave once every three days is basically good to charge less, there is no brand of cutter head better than Philips, you go to buy a knife head alone is about the price of a machine,

It's all the same. Pull it out with tweezers for the cleanest. Death is not worth life.

The razor is electric, it's almost as much as I told you.

Generally speaking, electric shavers will not shave the beard at all, and you can shave cleaner by mastering the following techniques

1: It is best to shave in completely dry conditions

2: When one hand is shaving, the other hand can not be idle, and the ** should be pulled tighter by hand 3: The suspended knife holder is best to shave in a circle, as for how to try it clockwise or counterclockwise 4:

After shaving your beard short, you may feel smooth by touching it from the bottom to the top with your hands, and then you may feel a whisker when you touch it from the bottom up, so you should shave it from the bottom up, and so on in other cases

5: Long beards are usually soft, cut short with scissors before shaving

Pure hand fighting!

You use this Gillette blade, which works very well for shaving a hard beard, but you really can't buy a better Philips razor to try.

Or it's just two arguments, hehe

My sister bought me a Braun razor, which is the type the landlord wants, I looked at the model is 390cc, and it also comes with an automatic cleaning center, you see if it's the kind you want. The shave can be said to be absolutely clean.

If you want to say**yes, you can use Gillette's kind of blade, which is cheap and easy to use!

Go up and buy a Feike razor in **, the kind of 3-headed, about 50 yuan, which is very cool to use.

Philips shavers are the best to use!

Many men will use razors in their daily lives, and many times they will inevitably have dirt and bacteria in them, and cleaning has become a big problem, so how to clean the razor? Let me take you to find out.

1. If you are a blade-type manual shaver, be sure to pay attention to changing the blade regularly. After using the razor, remove the blade and use a cotton swab or brush to clean off the residue such as stubble attached to the blade, and wipe it with water or alcohol to ensure that the blade is clean.

2. If the shaver is used more than 3 times, be sure to soak the blade for sterilization. Soak the blade in alcohol, remove it after about 3 minutes, and wipe it clean with a cotton swab to prevent rust on the blade.

3. The cleaning of the electric shaver is even more important, because the knife mesh of the electric shaver is precisely designed, and the cleaning requires patience and care. If you use it more than twice, you should clean it thoroughly, dip a cotton swab in a little alcohol, wipe the surface of the knife mesh, and then wipe the inner knife mesh to ensure the cleanliness of the knife mesh. After cleaning the knife mesh, open the knife mesh, remove the stubble inside, and then use the same method to clean the inside of the knife head, but you must remember that you should not scrape it with a hard object to avoid damaging the body.

The above is the razor cleaning method I share with you, you can learn about it if you need it, I hope it can help you.

1. Electric washable shaver cleaning. At present, there are two types of washable electric shavers on the market, one is partially washable, and the other is fully washable. For electric shavers that support partial washing, remove the lower knife mesh and other washable parts and rinse them directly under the faucet after use, rinse them and dry them off before installing them back one by one.

Remember, in particular, the place where the battery is installed and charged should not get wet, otherwise it may damage the shaver.

The shaver that can be washed with full body water is relatively more convenient to clean, and most of the current ** shavers, such as Braun's razor, almost all support full body washing. When cleaning this kind of shaver, you can directly pop out the cutter head, rinse the cutter head and grille, of course, the blade part does not have to worry about water, but it is recommended to dry the entire shaver after rinsing, and at the same time, in order to ensure the service life of the shaver, it is also recommended to regularly put some maintenance liquid on the shaver.

2. Automatic cleaning center. In addition to washing, in recent years, there has been another type of shaver cleaning mode, that is, the intelligent automatic cleaning center carried by the electric shaver itself, such as Braun shavers with CC series are equipped with automatic cleaning centers, which are more convenient to clean and do not need to be cleaned manually.

After using the shaver, directly into Braun's automatic cleaning center, you can quickly clean, disinfect, lubricate, and recharge the shaver with a single click, and the sterilization rate can be achieved with cleaning liquid, which is equivalent to using a new shaver every day.

3. Manual shaver cleaning. As the most traditional razor, manual shavers are small and easy to carry and flexible for shaving, so many people still use them. Manual shavers do not have electrical components such as batteries or circuit boards, so they can be washed with confidence.

After daily use, you need to take a small brush to brush off the beard and dander in the blade surface and crevices to avoid the growth of bacteria, in addition to washing the shaver frequently and sterilizing and disinfecting, you can wash the whole body or put it under the water pipe when washing, but try not to soak it in water for a long time. In addition to replacing the blade in time, the blade in use should also be sterilized with alcohol regularly.