Imitation wood railing, imitation wood guardrail columns are fixed by what

Updated on society 2024-06-26
8 answers
  1. Anonymous users2024-02-12

    The usual practice is that when the concrete cement railing is installed, the column should first leave a pre-embedded hole (generally 15 cm square size, try 20 cm), put it upright, pour the concrete cement into it, and then it will be firm after drying.

  2. Anonymous users2024-02-11

    Clause. 1. Preparation before installation.

    In accordance with the design requirements of the technical disclosure, check whether the foundation of the imitation wood railing meets the installation requirements, if not.

    If the requirements are met, rectification will be ordered. If the foundation is handled by Party A, the construction party shall be responsible for the technical disclosure. Make.

    Install the foundation. The foundation should ensure that the flatness pass rate is in.

    Above. Foundation reserved holes are used for pre-embedded columns.

    The imitation wood railing columns, separation columns, beams and other components transported to the construction site should be inspected one by one, check whether the components are deformed in the process of transportation and stacking, and check whether there is an error in the external dimensions of the imitation wood railing.

    Explain in detail the details that should be paid attention to in the construction process to the on-site construction personnel, so that each construction person can do it.

    Employees are aware of the progress of the installation.

    Clause. Second, the installation of imitation wood railings.

    Railing installation: The railing and the column are connected by tenon joint.

    On-site pay-off installation.

    Fix the column first.

    Rear tenon. Steeplechase boards. Steeplechase can generally be buried.

    3-5cm.

    Railing adjustment: every other.

    m to adjust the installed railing, adjusted and used.

    C25 concrete pouring.

    Fill the reserved hole to fix the column.

    Grouting: Grout the joints are brushed with grout agent and the surface treatment material dispensed.

    Cleaning and cleaning: If the mortar splashes on the surface of the product during installation, it should be wiped clean with water in time to prevent it.

    Adhesion to the surface of the product, affecting the appearance of the surface of the product. After the installation is completed, clean up the installation site in time.

    Clause. 3. Spraying of imitation wood railings.

    Preparation before spraying:

    After the installation of the imitation wood railing, the imitation wood railing should be maintained, and the imitation wood railing should be sprayed after the maintenance period expires. Process;

    The painting process should not be carried out in bad weather conditions such as rain;

    Imitation wood railing painting:

    The technical points of the spraying process: in the painting process, attention should be paid to the uniformity and smoothness of the paint surface of the imitation wood railing, so that the paint surface is uniform and bright. There should be no miscoating on the surface of the component, and there should be no missing coating or coating.

    Peeling, the coating should be uniform, without obvious wrinkles, falling, bubbles and other phenomena. The thickness of the coating and the number of coating passes correspond.

    In line with the design requirements, brush (spray) primer, topcoat and protective paint, and the topcoat color is agreed with the owner (the topcoat color is the same.

    The construction contract is consistent).

    Key points of spraying process:

    Mixing of paints

    The product instructions and inspection reports provided by the paint manufacturer guide the construction.

    For painting tools, you should choose a tool that is suitable for the characteristics of the paint, and if you change to other paints, you should use a full set of tools.

    Rinse thoroughly.

  3. Anonymous users2024-02-10

    That's right, the detailed steps:

    1.The embedded hole position of the column: first, the ground foundation will be marked by the engineering construction party to make the embedded hole, and the installation hole of the separator column will be reserved.

    a.The depth of digging for the soil foundation is 30 cm, the depth of the cement foundation is 20 cm, the distance between the center is measured, and the embedded holes are made in turn.

    2.Column installation: Please put the horizontal line first, confirm whether the horizontal line is vertical, and then put the column into the hole to fix, install the separating column on the reserved installation hole, pay attention to the verticality of the separating column during installation, and use the stool round finch cement mortar grouting firm.

    b.The soil foundation is filled with concrete 10 cm thick, and the cement foundation does not need to be poured CInstall the starting post DInstall the correction column ePay-off correction of perpendicularity and parallelism fInstall the second column.

    3.Railing installation: After the columns on both sides are fixed, the early jujube railing is embedded in the reserved hole of the column to assemble and fix, and the railing can generally be embedded 3-5cmgInstall the beam, pay attention to the overall levelness when installing.

    4.After all the columns, railings and beams are assembled, the reserved openings are filled and fixed with cement mortar.

    h.Repeat steps F, 3, G, and so onFill the joints with cement and 801 glue.

    5.If the mortar splashes on the surface of the product during installation, it should be wiped clean with water in time to prevent it from sticking to the surface of the product and affecting the appearance of the surface of the product. Spray outdoor paint on site for perfect results.

    After the installation is completed, clean up the installation site in time.

  4. Anonymous users2024-02-09

    1.Long life span It can resist various long-term harsh environments such as wind and sun, long period of dampness and water immersion.

    2.The cost is slightly lower, and the material is easy to obtain.

    3.The longer the indestructible, the higher the resistance to pressure. It can reach about 95%-99% in 28 days, and 105% in 50 years, if there is no gravity several times.

    Suppression, or the destructive power of natural and man-made disasters. It retains its form intact after decades.

    4.Corrosion Resistance It is highly resistant to the atmosphere, water, and general concentrations of acids, alkalis, salts, and a variety of oils and solvents.

    5.Strong insulating Cement, as a building material, is an excellent insulating material, and it can still protect good dielectric properties at high frequencies.

    6.Strong water resistance: The cement with better maintenance can maintain the original hardness and firmness for a long time when soaked in water for a long time.

  5. Anonymous users2024-02-08

    Imitation wood railings, imitation bark railings are made of raw materials such as reinforced cement, sand and other advanced mold equipment. The advantages of cement imitation bark railings, cement imitation wood grain railings, imitation stone guardrails, and imitation bamboo railings are that they are not easy to deform, not easy to corrode, can withstand long-term sun and rain, save limited resources, reduce wood felling, and protect the environment.

    Imitation wood generation, imitation wood railing has a realistic imitation wood texture effect, beautiful and durable. It is the best choice for outdoor occasions such as new rural construction, park scenic spots, outdoor river guardrails, etc.

  6. Anonymous users2024-02-07

    Imitation wood railings are divided into two kinds, one is cement imitation wood railings (handmade), the other is made by the machine, called imitation wood railings, due to different production methods, their construction methods are also completely different, the following are the simple construction process of these two kinds of imitation wood railings:

    First, the concrete imitation wood railing construction process:

    1. The internal structure of the imitation wood railing.

    2. Imitation wood railing surface modeling.

    3. Dyeing of imitation wood railings.

    4. Maintenance of imitation wood railings.

    Second, the installation method of imitation wood railing:

    1. Railing installation:

    2. Railing adjustment:

    3. Hook seam treatment:

    4. Cleaning and cleaning:

    Detailed construction introduction, the landlord can log in".

    Tree building garden net.

    Check out the "Cement Imitation Wood Railing Production Process" and "Imitation Wood Railing Construction Process". There is a very detailed introduction.

  7. Anonymous users2024-02-06

    The advantages of imitation wood railings are that they have a longer service life than railings made of other materials, are more durable, not easy to deform, and are corrosion-resistant. Realistic effect with imitation solid wood texture. There are also a variety of styles of imitation wood railings, including imitation wood texture railings, imitation bark railings, imitation stone railings, imitation bamboo railings and so on.

    The production method of imitation wood railing is made of raw materials such as steel bars and cement mortar through advanced equipment, which has strong compressive strength, beautiful and environmentally friendly, strong and durable.

  8. Anonymous users2024-02-05

    1. The material of imitation wood railing is generally concrete reinforced concrete cement sand and gravel, and the weight of the imitation wood railing per unit meter is 100 catties, which is not easy for a person to handle, and the cement products are durable and durable, enough to protect personal safety, and have no theft value.

    2. Beautify the environment, decorate the appearance of the new countryside in cities and towns, make man and nature more harmonious and unified, and protect the environmental protection environment is to protect our common home.

    3. Once installed, no need to maintain or replace it in the later stage.

    4. The imitation wood grain railing is rich in color, and there are many wood grain effects to choose from (such as: medium yellow wood, cypress color, orange yellow wood, red pine color, burnt shirt color, bark color, woody color, walnut, coffee color, light wood brown, tea wood yellow, Mu Hong, etc.) Each of them can achieve a natural effect.

    5. Green energy saving, low-carbon and environmental protection, advocated by the state.

    6. Strong weather resistance, no rot or rot, and long service life.

Related questions
3 answers2024-06-26

The sentence is as follows:

1. There is a strong wind in the sky, and the wind blows the leaves and brushes the sound. >>>More

8 answers2024-06-26

The moon is missing, and there is a time when it will be full again. >>>More

19 answers2024-06-26

1. From a distance, my father's vegetable garden is like a piece of green jade, embedded in the desolate hillside. >>>More

8 answers2024-06-26

The imitation of the woolen material also belongs to a kind of woolen material, but the quality and feel are much worse.

6 answers2024-06-26

Which way are you going to copy it?!

I can't help you ......Hey...... >>>More