Is the indoor temperature high, is it suitable for wooden flooring?

<> is not suitable, under normal circumstances, the wooden floor will not be affected by the temperature and humidity exceeding the standard, because the temperature and humidity exceed the standard is basically not suitable for living. It should be noted that after the new house is just renovated, the windows will be opened for ventilation. Some people open the windows for ventilation for half a year, regardless of whether they ask or not.

In the summer, the humidity in the house is too low, and the temperature rises, and the floor will be affected by sun exposure. Wood flooring is easy to fade after exposure to the sun, and the paint film is easy to blister and crack. Therefore, the ventilation of the windows should be moderate and cannot be ignored for a long time.

During the hot summer months, every week, we mop the floor with a wrung out wet mop. On the one hand, it can remove dust, and on the other hand, it can ensure that the humidity of the wooden floor is suitable.

The feel and comfort of wood flooring also determines that it is more suitable for use in the bedroom. The feeling of feet here is all that we feel when we walk barefoot on the ground. Because the essence of wood flooring is that the density of wood flooring is not so high, and there is a certain elasticity, we will feel very comfortable walking on wood floors.

Actually, you can feel this for yourself. For the tile, it doesn't feel particularly comfortable. The tiles are hard and uncomfortable to walk on on the tiles on the ground.

When the floor heating laid on the ground is constructed by dry backfill method, it is better to pave tiles as much as possible. The so-called floor heating dry paving means that after the heating pipe of the floor heating is done on our ground, the backfill layer is not poured, that is, the protective layer of concrete, but the cement mortar is directly laid on it, and then the tiles are paved.

Although the all-solid wood floor has a high environmental protection factor, it will be deformed when baked by floor heating for a long time. The later care of the all-solid wood floor is also easy to cause potential safety hazards of floor heating. Therefore, for residents with underfloor heating at home, it is not recommended to lay all solid wood floors.

The flooring material is mostly MDF, and the amount of glue used in the process is large. Although it is not easy to deform compared with solid wood, it has a low degree of environmental protection and is generally used for tooling. So, if you have underfloor heating in your home, it is not recommended to use reinforcing boards.

The most suitable are solid wood composite and solid wood multi-layer boards. Note that when choosing the flooring of these two materials, do not choose the one with a film on the back of the floor. Wood floors with foil are slower to conduct heat.

For rooms with underfloor heating, there are many factors that must be taken into account when laying wooden floors. Will the floor shrink or separate, affecting the aesthetics and use?

Unhappy. 1.Under normal circumstances, the wooden floor will not be affected by the environment of excessive temperature and humidity, because the temperature and humidity are too high and basically unsuitable for living.

2.It should be noted that after the new house is renovated, the windows will be opened for ventilation. Some people open the windows for ventilation for half a year, regardless of whether they ask.

3.In the summer, the humidity in the house is too low, the temperature rises, and the floor is also affected by sun exposure. After the wood floor is exposed to the sun, it is easy to fade, and the paint film is easy to blister and crack.

4.Therefore, the ventilation of the windows should be moderate, and it should not be left unattended for a long time. In the summer heat season, the floor should be mopped with a wrung out wet mop every week to remove dust on the one hand, and to ensure the right humidity for the wooden floor on the other.

Unhappy. Because wooden floors are very easy to deform and are not resistant to high temperatures, it is best to choose ceramic tiles.

The home is underfloor heating can be laid with wooden floors, it has good durability and long service life.

The home is floor heating can be laid wooden floor, but when laying wooden floors, it is necessary to strictly follow the process requirements to fully consider the impact of floor heating on wooden floors, so as to avoid deformation and cracking of wooden floors due to the effect of floor heating after paving wooden floors. When laying wooden floors in underfloor heating houses, you need to make keels, which will produce an air layer, which can reduce the impact of floor heating on solid wood floors, but will also make its thermal conductivity worse.

When laying wooden floors, we should also pay attention to the moisture content of wooden floors, if the moisture content of the purchased wooden floors is relatively high, it will appear thermal expansion and contraction under the action of floor heating, which is easy to cause the floor to warp and deform, so the moisture content of the wooden floor must be consistent with the moisture content of the local environment. When there is floor heating and paving wooden floors at home, we should also pay attention to safety, because most of the keels of wooden floors need to be nailed and fixed, so it is easy to cause damage to the underground floor heating pipes, and if you do not pay attention to breaking the money during the construction process.

As long as the moisture content of the floor is controlled, and the indoor air humidity and temperature can be mastered, the wooden floor can maintain good performance, and it will be used for a long time, but in the process of using the wooden floor, we should also pay attention to its maintenance and maintenance, try not to let him contact with moisture, and not let the indoor air humidity be too large, so as not to cause it to be damp and mildew, affecting its durability.

After laying the wooden floor, it is necessary to pay attention to the protection of the surface of the wooden floor, and do not rub the surface of the wooden floor with sharp objects or hard objects, otherwise it will cause damage to its surface and affect its service life. If you want to prolong the durability of the wooden floor, you should also maintain its surface regularly, and try to wax it after cleaning, so as to form a protective layer on the surface of the wooden floor, which can reduce the corrosion and damage of harmful substances to it. There are many benefits to laying wooden floors on floor heating, which can improve the feeling of feet and make the indoor environment more warm, but there will also be some shortcomings, it has poor thermal conductivity, which will affect the heating effect of floor heating.

Wooden floors can be laid on the floor for heating, and there are special requirements for wooden floors used for floor heating. The selected wooden floor is not easy to deform and tilt angle, which does not affect the effect of using floor heating; Laminate flooring is more suitable than parquet flooring on floors with underfloor heating. Laminate flooring is less likely to deform under the same environmental conditions.

The main reason why wood floors cannot be used in the home is that they contain formaldehyde. Harmful substances can volatilize due to heat, which is not good for the health of family members.

Try to buy some big brand products with reliable and reputable brands, which are more guaranteed to use, and you should try to choose laminate flooring that meets the environmental protection standards of E1 or above, which can protect the health of your family to a large extent. Whether wooden flooring can be used for underfloor heating can be seen from the heat transfer speed. Most laminate floors are about 6mm 10mm thick, so the heat transfer to the ground will be much faster than other products, with good heat transfer performance.

Wood flooring has poor heat dissipation and much stronger thermal insulation than other products, making it ideal for use in underfloor heating rooms. The visual effect of the wood floor is also a very important key. The material used for wood floor heating can give a warm feeling, which is perfect for use in cold winters.

Can you lay wooden floors for underfloor heating? The answer is yes, but when buying underfloor heating, we should make sure that the underfloor heating products meet the standard requirements in order to make underfloor heating better warm our home. In daily care and hygiene, try to avoid contact between the floor and water.

When cleaning the floor, you can choose to wring it out with a waste bath towel, and the cleaned tool must not have obvious water droplets flowing out, and wipe it on the floor. At the same time, don't clean the floor every day, just clean it twice a week, it will be durable over time. When it rains, pay attention to close the windows in time to prevent rainwater from seeping into the room.

Take care to turn off the faucet in your home at all times.

Can you use wooden floors for underfloor heating.

Yes, but only floor heating can be used, and solid wood flooring must not be used. This is due to the high moisture content of the pure solid wood floor, if it is directly laid on the floor heating, the floor will appear deformed, cracked, warped and other problems after a long time, which will directly shorten the service life of the solid wood floor, and will also affect the heating effect of floor heating.

How to choose floor heating materials.

1. Look at the stability.

Because the floor heating will produce high heat during operation, the stability of the floor material must be good. If the stability is not good, the ground material will be prone to cracking and deformation after a long time.

2. Look at thermal conductivity.

For example, floors and floor tiles are slower to conduct heat, and the temperature rises more slowly, and it generally takes 1-3 hours for the indoor temperature to rise if the floor is used. Floor tiles, on the other hand, conduct heat quickly and can heat up quickly in a shorter period of time.

3. Look at environmental protection.

Generally speaking, if the environmental protection of the floor is poor, then in the environment of floor heating, the harmful substances in the floor will increase, which is easy to cause excessive formaldehyde. The floor tiles do not contain formaldehyde, and even in a high temperature environment, they will not produce harmful substances.

4. Look at the convenience of installation.

As far as flooring and floor tiles are concerned, the installation of flooring is relatively simple, and the purchase of flooring generally includes installation, so the owner does not need to worry about the installation. If the floor tiles are purchased by themselves, they must find workers to pave them by themselves, and the laying of floor tiles is more complicated and the process requirements are higher.

1.Many people choose wooden flooring in the bedroom because the floor feels comfortable on the feet. Wood flooring is indeed better than tile insulation, when the same temperature is reached, after turning off the floor heating, the wood floor can keep the house warm for a relatively long time.

However, the excellent thermal insulation of wood flooring also means that it has poor heat dissipation, so when the underfloor heating is turned on, the indoor temperature of the wood floor will rise more slowly. Wood flooring is divided into solid wood flooring and composite flooring, solid wood flooring is more environmentally friendly, but it is not suitable for use as floor heating flooring, because even if solid wood flooring is in an ordinary environment, after a long period of use, there will be deformation, glue, cracks and other phenomena, and if the floor heating is laid, the probability of solid wood board deformation by heating will be greater, and it is even possible to warp the whole piece. This is not the case with more stable laminate flooring and laminate flooring, which are widely used as flooring for underfloor heating.

However, it is worth noting that some composite flooring and laminate flooring contain chemical additives such as formaldehyde, which are emitted into the room after heating, which will inevitably pose a health threat to the human body.

2.Because of its good heat dissipation, ceramic tiles can increase the indoor temperature in a short time after the floor heating is turned on, and the temperature is generally 3-5 higher than that of the wooden floor, but it is also faster to make the indoor temperature dissipate, and it can not be kept warm for a long time. Because it needs to be heated for a long time, the hardness of ceramic tiles due to the moisture content of the bottom, can also be stable after heating, do not worry about mildew, moth-eaten, corrosion, deformation after long-term use, do not have to worry about water ingress, deformation after heating, warping, not to worry about harmful gases or radioactive substances emitted after heating, which is not only easy to take care of but also more healthy and environmentally friendly.

It is recommended that if there are many people in the family, or there are often guests to visit the door, you can choose the antique bricks and vitrified bricks on the market, which are not only beautiful to the public, but also easy to clean.

Pure solid wood flooring is not suitable for floor heating because pure solid wood flooring has not been processed, it contains moisture, and if it is heated for a long time, the floor will be deformed and cracked. Nowadays, there are many floors suitable for floor heating on the market, such as laminate flooring, laminate flooring, multi-layer solid wood flooring, and microcrystalline stone wood flooring. If you are worried that the wooden floor on top of the floor heating will crack and deform, but you like the wooden floor, then the wood grain brick is your best choice.

Wood grain bricks are realistic wood floors, and they are also very good-looking, which is also a reason why many people use wood grain bricks after laying floor heating. However, after all, wood grain brick is not a solid wood floor, and it is not as good as wood floor in foot sentimentality, and the color of the grout is also difficult to choose. It is recommended to choose laminate flooring because the thickness of laminate flooring is mostly 7 8mm, which is easy to conduct the heat generated by the geothermal system to the surface, and the surface of the composite floor is a wear-resistant layer of metal oxide, and the heat spreads very quickly and evenly on the surface.

The solid wood floor is relatively thick, generally about 2cm thick, and the keel should be played during installation, so the heat of the geothermal system is not easy to be conducted to the surface, and the thermal conductivity of the wood is very low, which will lead to the waste of heat, and will also make the surface temperature uneven, and the temperature difference is very obvious. Why can't geothermal floors be laid with wooden floors? Answer:

In general, solid wood flooring and laminate flooring are not suitable for geothermal heating, they are not only easy to deform and crack, but also release formaldehyde when the floor is heated. Reason: At present, many commercial houses use geothermal heating, which is more and more favored by people for its advantages of cleanliness, high thermal efficiency, space saving, and in line with human temperature habits.

But then the question arises as to whether underfloor heating and wooden flooring are suitable.

The home is underfloor heating, and wooden floors can also be laid; As long as you buy a very good quality and very durable one, then he will have no problem for a long time.

Wooden floors can be laid; However, if it is not durable for a long time, the wooden floor will be yellow, cracked, peeling, and the temperature is too high, and the wooden floor will also be deformed.

Wooden flooring can be laid, but it is better not to choose. Over time, the floor may become warped and may also cause deformation.