The south is so humid, what to consider when decorating wooden floors?

In general, walls in the south have a higher moisture content. This is different from air humidity, and it is a good thing if you use water-resistant putty, because water-resistant putty is not formed by one-time bonding. Water-resistant putty will undergo a 7-day hydration reaction after being put on the wall, which will be more thorough and more favorable in the presence of water.

But if the wall is so wet that it "sweats", it is necessary to avoid construction, otherwise problems will arise during the hydration process. However, if you use glue such as old powder to adjust putty, the water content of the wall will be too high, and there will be problems, because old powder is not resistant to water, it will absorb water and become powdery.

Too high a water content will accelerate pulverization and shorten the lifespan. For latex paint, the moisture content of the wall should be controlled below 10%. Latex paint is a "fast-drying" type product, and the high moisture content of the wall will make it difficult for latex paint to dry, affecting the film-forming effect (that is, the paint film is complete, uniform and firm).

2.Air humidity. Compared to the moisture content of the wall, the air humidity is easier to measure and the conditions are simpler.

Interface agent, gypsum, putty, latex.

If the home is on the first floor, you need to redo the floor, remove the original floor, and raise it to make a moisture barrier.

If it is not the first floor or basement, there is no need to do a moisture-proof layer, pay attention to the choice of materials, and do a good job of moisture-proof work at the grassroots level. Choose tiles with low water absorption and thick glaze layers that are more moisture-resistant, while wood floors are generally more damp-resistant.

If you particularly like wooden flooring, be sure to pay special attention to the moisture-proof work of the floor.

When choosing wood flooring, it is necessary to give preference to materials with strong moisture-proof performance and long-lasting moisture-proof effect, and be careful not to have volatiles, so as not to pollute the whole house.

Pay attention to the temperature of the wooden floor, generally choose a sunny day, and try to keep the room temperature between 15 -20. Before paving, the floor is left indoors for two days to allow its own temperature to acclimatize to the indoor temperature.

After laying the wooden floor, in order to prevent moisture, you should also pay attention to maintenance in daily life. When the weather is humid, the water vapor on the surface of the floor should always be blotted dry with a dry cloth, the room should be dehumidified regularly, and ventilation should be minimized on rainy days. When cleaning wooden floors every day, pay attention to controlling the amount of water used, wipe with a rag without dripping or use a semi-wet mop to clean it.

After wet cleaning, dry the wooden floor with a dry cloth or open a window for ventilation. If it rains, don't open the windows and choose to use an air conditioner to dehumidify.

Laminate flooring and laminate flooring can be, but you can't use the kind of poor solid wood flooring, otherwise it will be deformed and cracked after absorbing water, and it will be deformed and cracked if it loses water after absorbing water. If it's in Hainan, it's better not to use the floor, mold grows everywhere here in winter, and I think even the best floor will be molded.

The most important thing is moisture-proof work, if your family lives above the second floor, you don't need to worry about anything, as long as you leave more than one centimeter of shrinkage joints when installing wooden floors.

The first is the floor, the floor is low and the humidity is very large. The second is to go back to Nantian, if you go back to Nantian serious wooden flooring is not necessary, the third is the humidity in the air, if the humidity is high, there is no need to install wooden flooring.

Due to the humid climate in the south, it is necessary to apply waterproof paint when installing wooden floors, and choose wooden boards that do not absorb much water.

Then when decorating the wooden floor, you should consider isolation, so that the wood can be protected.

Generally speaking, the location is not suitable for assembling wood flooring, because the wood is very easy to return to moisture, and then cause a series of bad conditions such as mold, deformation, swelling, etc., for example, the gas in the south is more humid in winter, especially in the case of rain and rain, at this time, the solid wood board or composite wood floor at home will change the probability of moisture, so as to crack, more serious and even mildew. But those can not stand everyone's enthusiasm for wooden flooring, and wooden flooring is very advantageous in many fields, therefore, if you choose to install wooden flooring, how to waterproof the wooden floor, is particularly important.

Important 1: Pay attention to waterproof countermeasures when assemblingIn general, solid wood flooring is very easy to return moisture than composite wood flooring, so when laying, it is best to add a layer of moisture-proof film at the bottom end, although the cost of this kind of processing technology has risen, but it can be guaranteed for life. Important 2:

The maintenance method in the middle and later stages is very important: 1. Usually some items that can be affected by moisture can be placed in the room, such as charcoal, dehumidifiers, etc., which can solve the slightly wet and cold situation that sometimes occurs. After the wood floor is applied for a period of time, it must be polished and waxed again, which can not only volatilize the residual moisture of the construction project, but also increase the service life of the wood floor.

Built-in appliances such as home dehumidifiers, such as home dehumidifiers, can solve a variety of wet and cold conditions. Compared with organic chemical damp methods such as dehumidifiers, dehumidification bags, lime powder, etc., its advantages depend on the fact that dehumidification is not limited to small indoor spaces, but is dehumidification of the whole space, and the effect is fast, and the dehumidification is effective, as long as the equipment does not have common faults, it does not need to be replaced; In addition, long-term can not only solve the sometimes mild damp and cold conditions, but also solve the long-term and perennial damp and cold conditions that cannot be handled by other dehumidifiers, such as basement dehumidification, wine kiln dehumidification, etc., and its very obvious damp and cold conditions, such as the rainy season, water vapor solidification in the room on southerly days, etc.

Wood flooring should be polished and waxed once a quarter to maintain the brightness and moisture-proof characteristics of the surface of the wood floor. Usually clean should be careful not to spill excessive water on the floor tiles, generally with a semi-wet mop to clean, after the opening of the household dehumidifier to carry out indoor drying, to ensure that the wooden floor or the objects in the room are not easy to return moisture. When the climate is relatively wet and cold, the windows and doors facing south or southeast (i.e. the direction of the induced air) should be closed as far as possible, and only the windows and doors at the lower prescription position should be opened to reduce the water vapor entering the room, or the household dehumidifier should be opened immediately to dehumidify.

When the sun is shining, all windows and doors can be opened for natural ventilation to speed up water evaporation. In the afternoon, the relative humidity of the air in the room is generally at the maximum, but the outdoor ambient humidity value is at the minimum, and indoor ventilation is appropriate. In the morning, dusk and evening, the outdoor ambient humidity value is at the maximum value, and the indoor ventilation should pay attention to the time.

1. Keep a ventilated and dry environment.

We can keep the room ventilated regularly, which can not only make the chemicals in the floor as volatile as possible and discharged to the outside, but also allow the humid air in the room to be exchanged with the outside. Then especially in the case of long-term unoccupied and maintained, indoor ventilation is more important. So what we commonly do is:

Open windows or doors frequently to allow air to circulate, or use air conditioning and ventilation systems to create a dry and clean environment.

2. Maintain the wooden floor regularly.

We can wax the wooden floor, waxing can not only make up for the scars left on the wooden floor in daily life, improve the brightness of the floor, but also the wax itself has the function of waterproof and moisture-proof. In fact, the number of waxing can vary depending on the old and new floors, the new wooden floors are beaten every half a month or a month, and after 3 or 4 waxes in a row, you can wax every six months. In addition to waxing, we can also regularly maintain the floor with essential oils to enhance the stability of the floor and avoid absorbing moisture.

3. Correct cleaning and care methods.

We pay attention to controlling water consumption in cleaning, and in the daily maintenance of the floor, in fact, cleaning is a necessary item. Because the humidity of the rainy weather is large, it is not suitable to mop the floor with water or a damp mop, so as to avoid excessive humidity on the floor, the general stains can be treated with a soft dry rag, and the stains must be cleaned with water. So we recommend using a cloth that has been soaked and wrung out until it does not drip clean.

Open the doors and windows immediately after the floor has been plastered, let the air circulate, and blow dry the floor. In humid weather, you can wipe it again with a dry cloth and then use an air conditioner to dehumidify.

If the southern region is more humid, try not to choose wooden flooring, but choose marble or tile flooring, which can better prevent moisture and not easy to corrode.

Try not to choose wooden flooring when choosing flooring in humid areas in the south, because the moisture-proof effect of wooden flooring is not as good as tiles, and the moisture-proof effect is good, so try to choose ceramic tiles.

Choose a moisture-proof floor, and when laying the floor, lay a moisture-proof film on the ground, which can effectively block the humid air, which is better for the floor and the family.

The foot feeling of the wooden floor is comfortable and has a natural fragrance, and the solution to the damp problem of the wooden floor: in humid weather, whether the window can be opened or not makes many families feel very divided. Open the windows to ventilate, in case the outdoor environment is a little more humid, it is easy to bring a lot of moisture to the home.

Don't move, people can't touch the ventilation in the room, and it's very uncomfortable. In fact, even in rainy season, it is necessary to open windows for ventilation. The difficulty lies in how to open the window for ventilation and when it is best to open the window for ventilation.

Industry insiders told reporters. At temperatures with relatively high ambient humidity, the form of window ventilation should be to close the windows and doors facing south or southeast, that is, upwind, and only open the windows and doors at low angles, so as to reduce the water vapor entering the room.

When the weather is clear, open every window door to speed up water loss. However, the relative humidity of the air outside in the afternoon is at the maximum value, which is not suitable for opening the window for ventilation, so it is necessary to open the window for ventilation in the afternoon or dusk, when the weather is relatively dry. First check whether there is a gap in the ground, the gap is an important safety outlet for groundwater to penetrate into the top, cement mortar or whole poured concrete ground, it is not difficult to see the gap above the general width.

The treatment method of gaps and wall cracks should be chiseled into "V" shaped joints for standard voids, and after the joints are cleaned, asphalt plaster should be used for airtightness. If it can be baked with a flame, the crack will be abundant and the drying effect will be better. Generally, the show has a few gaps, and it is a large-scale closed type.

For areas with hollow drums, the block surface layer should be knocked out first, the foundation cushion should be slurred, a mixed mortar should be brushed on the foundation cushion, and then the same raw materials as the block surface layer should be repaired and leveled.

And after the original ground is treated with moisture, the new block surface layer is made, and the selection of raw materials for the new block surface layer should pay attention to the selection of high strength, anti-wear, a certain moisture-proof level, conducive to clearing, practical and beautiful ground materials, and the cement mortar surface layer can also be selected. In view of the relative humidity, in addition to the special equipment to control the relative humidity of the air, it is not suitable to open the windows with the wind fluttering in the general construction project, and the door of the room with the wind frequency should be opened less to reduce the influx of humid vapor into the house.

The home must be made very clean, and do not quietly let the wooden floor meet water, do not let the room be damp, and often open the window for ventilation, so that the wooden floor will not be damp.

Closing the windows is a good solution, and there will be no more problems with very humidity in the future, and the temperature in the home will also have a significant increase.

Close the windows appropriately. Don't open the windows often, and secondly, you can choose some moisture-proof treatment in your life to find professional workers.

Summary. The main tiles that can alleviate the return to the south are polished tiles and mosaics, which are generally used in humid places, so their waterproof ability is also relatively good. In addition, when purchasing ceramic tiles, try to choose some tiles with low water absorption, high density and high hardness, so that the ceramic tile structure is stable, it is not easy to absorb moisture in the air, and it will naturally be relatively dry.

The main tiles that can alleviate the return to Nantian are polished tiles and mosaics, which are generally used in relatively humid places, so the waterproof ability of his Hanzheng is also easier to guess. In addition, when purchasing ceramic tiles, try to choose some tiles with low water absorption, high density and high hardness, so that the ceramic tile structure is stable, it is not easy to absorb moisture in the air, and it will naturally be relatively dry.

The floor is less humid with these two tiles back to the south.

Marble back to the south of the day damp.

When the air humidity is high, marble is more prone to moisture.

The polished tiles are too slippery, and I am afraid of falling down when I walk, or is it something else?

Anything else.

Hello, you can paste wood grain bricks.

The wood grain brick will not be deformed or corroded by soaking in water, and it will dry as soon as it is wiped, which can be said to be a necessary artifact for returning to Nantian. In addition, the north needs to be equipped with a clever section of warmth, which is also very suitable for installing wood grain filial piety bricks, because it has good thermal conductivity and a better experience.

Of course, there are drawbacks.

Barefoot will be cooler than stepping on the wooden floor, the beautiful seam will be more expensive, the paving will be more expensive, and the high-quality wood grain brick itself will be more expensive.

Floor moisture-proof mat: It is the partition between the floor and the ground, which is generally spread between the ridge and the floor, and mainly plays the role of moisture-proof, protecting the floor, and increasing elasticity. From the building materials market, it is understood that some flooring manufacturers will be free with the floor.

Moisture-proof mats are given as a fee, and some consumers need to buy them themselves. Compared with other building materials, the moisture-proof mat is cheap, and the lowest is only 1 yuan per square meter. However, the designer said that the quality of the moisture-proof mat is directly related.

The service life and effect of the floor, consumers are advised not to save money on moisture-proof mats.

Waterproof repair agent: It can be used to repair small cracks in leaking walls and floors and gaps between tiles. There are a number of convenient restoratives on the market for home use, some of which can be sprayed into the leak like an insecticide.

It's very easy to operate. If there are small gaps in the walls or floors of your house (especially in the bathroom), you may wish to buy this waterproofing repair agent and try it yourself. Moisture-resistant slurry has a similar effect.

Moisture-proof gypsum board: It has one more silicone oil component than ordinary gypsum board, which is mainly used for bathroom ceilings with high air humidity. From some decorative squares, it is almost enough to buy more than 20 yuan per square meter of moisture-proof gypsum board.

Waterproofing agent: It can be mixed in mortar and coated on the surface and wall base, and is mainly used for waterproof and seepage prevention of bathroom, kitchen floor and wall during interior decoration. There are many categories of waterproof agent products in the building materials market, from more than 40 yuan per barrel to more than 300 yuan (about 10 square meters can be used), the quality is naturally uneven, and the designer recommends choosing a better brand product.

Tile mildew and moisture barrier grout: used to fill the gaps between the tiles, mildew and anti-seepage performance is much better than the white cement used to fill the tile gaps before. This caulk** is not much more expensive than ordinary caulk, and you can buy a large pack for twenty or thirty yuan.