The humidity of the house on the first floor is relatively high, how to do a good job of moisture pr

When living in many owners on the ground floor, they have to pay attention to one factor they want to renovate, which is dampness. The first floor of every building is more likely to be wet, especially when the spring is more severe, how the first floor is damp how to decorate the house, the following small series get you down one layer to the decorative moisture tip.

How to decorate the house on the ground floor, moisture-resistant skills, so comfortable.

When decorating the first floor, the thickness of the walls should not be so thin, it is better to make empty walls. Then the wall area widens. If you have a lot of space, you can add some dimensions. If the space is limited, then widen appropriately, the larger the wide area, the greater the moisture resistance.

High-quality warm material.

If you use empty walls, you need to choose high-quality materials among the materials, and you can't use ordinary floors. The construction of walls requires strong, warm, high-quality materials that can have excellent moisture resistance in rainy days.

Ground floor high. On the ground floor of the house, you need a floor-to-floor. The house is taller, so the floor is also opened correctly, and the higher the distance between the floor, the higher the humidity resistance.

Do not use wooden floors, high-quality floor tiles.

When decorating on the first floor, it is better not to use wooden and laminate floors. While many bedrooms are made of wooden floors, the first floor is more damp. If there is moisture, the wooden floor is prone to corrosion and can rot easily.

It is better to use high-quality floor tiles, because ordinary floor tiles are easier to meet water erosion, if there is a return, the walk will be very slippery, high-quality floors are better, plus the floor is relatively high, put it for a few days It plays a good moisture-proof effect.

The roof is the ceiling.

The current house is basically commercial housing. It usually has other floors on top and is relatively unsafe with a relatively small chance of dampness on the roof. It is better to make a ceiling, not only beautiful.

The windows are made ajar.

It is better to make a semi-open window, which not only makes the outside cold dew, but also plays a moisture-proof effect.

The above is an introduction to how to decorate the house on the ground floor, I hope to provide some help when I renovate the house, I will provide some help, although it is more likely to appear, but as long as the decoration is good, the environment is still a very comfortable environment.

When people are not at home, they should open the windows for ventilation as long as it is sunny outside. If someone is indoors, the windows should also be opened for ventilation and try not to spill water on the floor.

The humidity of the house on the first floor is relatively large, you can buy a few bags of quicklime by yourself, pack it in plastic bags, and put it in all corners of the house on the first floor, and the humidity will be reduced in less than two days.

Clean the bathroom after each bath, and then open the windows to ventilate, which will help the room to dry, and the second is to try not to get some water into the house.

1. Water-based paint is made of water as a solvent, its aqueous solution has a film-forming substance after brushing, and its coating can be well attached to the surface of the wall to form a protective film, which is insoluble in water, and has strong water resistance, and has a very good moisture-proof effect. We use it to paint the interior wall, which will make the surface of the wall have a protective layer, so as to achieve the effect of moisture-proof.

2. We can choose some tiles with moisture-proof effect, which have a very low water absorption, thick glaze layer, and high density of tile holes. Use it to pave the wall, it also has a good moisture-proof effect.

3. The natural environmental protection wallpaper and textile wallpaper in the wallpaper have very good air permeability and mildew resistance. We can choose one of the wallpapers to post on the wall, which not only plays the role of moisture-proof and mildew-proof tablets, but also beautifies the environment. Because it is an environmentally friendly wallpaper, it will not harm the human body.

4. Moisture-proof board is a good moisture-proof material, because it has a moisture-proof layer on the surface, which can isolate moisture in the air, and the effect is very significant. Therefore, using moisture-proof boards to make moisture-proof treatment on the wall can protect the wall from moisture.

When the self-built house is damp, the ground is always wet, and there is water coming out of the concrete floor. The floor tiles are slippery. There are a few ways to improve it.

If you are building, it is better to deal with it, that is, the foundation is dug down twenty or thirty centimeters to make an overhead, but the ground beam is above the ground, so it is easy to make a vent. Or directly raise the ground on the first floor, forty or fifty centimeters higher than the outside. When the foundation is built, remember to set up a small opening every one or two meters around, 50*50 or 100**100, or irregular, mainly ventilation under the ground, and the vent is covered with steel wire mesh.

lest it become a den of snakes and rats. After the foundation is laid, the waterproof membrane will be laid after the ground beam is laid, which can interrupt the passage of water vapor through the wall to the wall. After the coil is finished, a layer of cement mortar is smeared, and a layer of floor slab is covered, which is a prefabricated slab, and a layer of fine stone concrete should be played on top of the prefabricated slab.

So that the first floor of the house will not be damp.

If it has been built, the ground can also be waterproofed, if the ground is tiled, either the tile and the lime sand layer are frustrated, or directly on the tile waterproofing, but you have to change the door, because the ground is high. To do waterproofing on the tile, first apply the interface agent on the tile to increase the grip and roughness. Then the lime sand layer on the wall is also frustrated down to the meter.

Then cement mortar plastered the walls. Then the floor is covered with membrane, and the walls are brushed with waterproof paste. If you think it is so troublesome, make polypropylene cloth waterproof on the ground and wall.

After the polypropylene cloth is finished, if the wall is pasted with porcelain tiles. Spread cement mortar on the polypropylene cloth before tiling. If you just scrape the melamine paint, you can scrape the putty directly.

The floor can also be paved directly with floor tiles. Or make cement mortar for the ground. After this treatment, it generally does not get wet.

Underground moisture, generally on the first floor of the house, or in the basement, if this is the case, need to solve the problem of ground moisture and wall moisture, now the most effective way is to use a special ground moisture liquid spray two, you can completely solve the problem. What needs to be noted here is the difference between waterproof and moisture-proof, waterproof is liquid water, moisture-proof is moisture-proof, and the waterproof layer cannot isolate moisture from entering.

The moisture content of the outdoor air is high, so it is necessary to pay attention to the ventilation of the windows during the rainy season. Windows on the windward side should not be left open for a long time. Only a short period of ventilation can be done.

Put some desiccant products in the appropriate place in the room. The dehumidification function of the air conditioner can be turned on intermittently. If possible, you can also turn on the dehumidifier.

The first floor of the self-built house is damp, this situation is still a lot, in different seasons, the moisture of the ground will go up, after a long time, there will be dampness indoors, although the foundation of the first floor of the self-built house is very high, it still can't prevent the return of moisture, the first floor of the self-built house is decorated, and the moisture-proof treatment can be done, the questioner asked: the first floor of the self-built house is very humid, what are the good moisture-proof measures? The following is a detailed analysis and answer.

Waterproof powder oneOn the first floor of the self-built house, when building the house, in the cement mortar, the two materials should be added in proportion to the common sense, which is the waterproof powder used for moisture-proof treatment, we may not know much about the waterproof powder, the waterproof powder is packaged, each bag weighs 20 kg, and is a dry powder material, mainly used for moisture-proof treatment on the wall and the ground, and it is essential to add waterproof materials in the construction of rural self-built houses.

Moisture-proof powder twoSelf-built first floor, the main structure can not add waterproof powder, the main structure is covered, the wall, the ground has a smoothing process, outdoor wall and indoor wall, in the trowel process, cement mortar, add an appropriate amount of waterproof powder, stir evenly to smooth the wall, the ground, so that there will be no moisture indoors, waterproof powder is mainly moisture-proof, waterproof, used in humid environments, such as not doing moisture-proof treatment, fine decoration before doing it.

Do waterproof threeThe decoration of the first floor of the self-built house, like the construction of other floors is not good, all the space to do moisture-proof, waterproof treatment, is to make waterproof coatings for different spaces, such as cement mortar wall, the ground is not very flat, with the ground leveling mortar to re-smooth, a thin layer can be smeared, so that not only save waterproof coating, but also can achieve the ideal moisture-proof effect, different spaces to install wooden floors, will not be moldy because of moisture.

Do waterproof four,First do the wall waterproof coating, and to do one meter high, the underground moisture back to the interior, the wall will not appear damp, after the wall waterproofing, all the space ground waterproof, do waterproof coating is more complicated, especially the wall, ground joints, waterproof coating must be done carefully, the key parts of the waterproof do, after the first floor of the self-built house is finely decorated, there will be no dampness, which is the reason why the first floor of the self-built house needs to be waterproof.

At the same time, we should close our doors and windows to prevent the invasion of moisture, and we can buy a dehumidifier or heater for dehumidification, and we can also turn on the dehumidification mode of the air conditioner.

Make waterproof paint on the ground, set up some overhead layers, buy a dehumidifier at home, put some activated carbon, and put some desiccant can effectively prevent moisture.

When we buy a house, it is very important to choose the floor of the house, some people don't like the ground floor and the top floor, in fact, the biggest reason is that the bottom floor is easy to get wet, and the top floor is easy to leak! These defects are determined by the location of the house, and there is no way for the developer to make changes. Therefore, in order to compensate the owners, many developers choose to reduce the price of the house on the ground floor**!

And when it comes to the owners, some of them have to choose a one-story house in order to save these money, or some to make it more convenient to travel. What should I do if the house on the first floor is often damp? Teach you 4 moisture-proof tricks, and you won't be afraid of getting wet at home in the future!

If you are a resident living on the first floor, then you should consider the issue of moisture protection when you are decorating. Generally, when the owner of the first floor is decorating the ground, the decoration master will suggest that it add a moisture-proof layer to the ground, so that it will be helpful for the moisture-proof of the house in the future. As for how to do it, you can add a layer of moisture-proof material to the ground, or directly raise the ground by 5-10 cm, of course, the premise of the height is that your house space is relatively large, and the floor height is enough to fill in.

Otherwise, when the ground is raised, the space will become smaller, which will make people more depressed, then it will be unnecessary!

For the residents on the first floor, the choice of flooring is very important, because to a certain extent, the floor can also play a role in preventing moisture. First of all, the residents on the first floor must not use the wooden floor, the wooden floor in the supermarket environment, easy to rot, when the time is pasted on a few years, we have to replace, it is a waste of time and money! Secondly, when we choose a tile floor, we should choose a good quality, and ensure that its water absorption rate is low and the glaze layer is lower, so that it will have a greater effect on moisture-proof!

The impact of moisture-proof on the first floor is mainly to affect the decoration of the wall, so when we decorate, we must try to use waterproof materials, in case we do not do a good job of moisture-proof, moisture will affect our decoration. At that time, the economic loss caused by the negligence of moisture prevention will be too great! In addition, in order to prevent the wall from being affected by moisture, it is recommended that you also install waterproof materials on the wall so that moisture does not affect the wall.

Basically, after doing the above 3 steps, we can resist moisture even if we live on the first floor. But in some cities in the south, when there is a spring and summer, the home is like a water curtain hole, and the humidity is very strong! At this time, it is not enough for us to simply think of moisture-proof when decorating, we also need to install a dehumidification system at home to help prevent moisture and dehumidification in later life!

In order to improve your quality of life, installing a dehumidification system at home is actually quite a worthwhile!

The first floor is a natural law, since we enjoy the convenience of the first floor, there are other disadvantages of accepting it! But fortunately, the matter of resurgence, as long as we have a little care, we can still solve it, we learn the above 4 moisture-proof methods, and start to work on the decoration, I believe that even if your home is on the first floor, you can live as dry as the middle floor!

You can choose moisture-proof materials when decorating, but also take necessary measures to minimize the impact of moisture-proof, but also pay attention to open windows for ventilation, the first floor can be set up with relevant ventilation systems, as well as some natural ventilation pipes, or you can also install some electric fans, ventilation fans, so as to effectively remove moisture; This is because it ensures the practicality of the house and makes it durable.

You can buy some moisture-proof equipment, or do a good job in waterproof management, pay attention to the problem of lighting, and pay attention to the overall room structure, so that you can prevent moisture. Because the lighting problem can solve the situation that the indoor moisture is too heavy, it is conducive to ensuring the indoor moisture-proof situation, which can avoid the problem of poor indoor environment.