The dark line during the decoration is broken, can you only take the bright line?

Dark line breakpoint. If not buried wires in the wall.

In the tube, you can connect it; If it is broken in the buried pipe, you can only take the bright line, and re-arrange the dark line when you decorate it. When decorating the home, the obvious advantage of concealed wires is safety, especially for families with children. In order to avoid children tripping or electric shock, it is safer to bury wires in the wall, which has the advantage of looking more beautiful and generous, and will not hinder the placement of furniture in the home, and can be placed anywhere at will.

It is most reasonable to install such sockets near sofas and cabinets at home. Dark lines are better! One is beautiful, the second is safety, and the third is that the line is broken and the maintenance does not hurt the wall.

Losses are reduced and time is saved. The circuit design requirements are strict, the cost is high, and the maintenance is not a general trouble, but a very troublesome.

<> from civil buildings.

The electrical design specifications and construction acceptance specifications require that the home decoration circuit when we decorate must be concealed. If your house is designed with pipes reserved, you can walk the dark line, and if you don't have a reservation, you can only have a bright line. The color of the wall of the home improvement wire can only be a simple white wall, because the color of the trunking is basically white, and only the large white wall and the trunking will not appear too prominent.

Advantages of open wire: low cost and easy maintenance.

In addition to wiring, there is also the installation of switches and sockets - you can integrate exposed wires into the room design, but you can never design surface-mounted switches and sockets as beautifully as concealed ones. For those who like to change, or things that increase or decrease in the room, then these fixed switches and sockets become a disadvantage that cannot be improved. Each has its own advantages and disadvantages.

It cannot be said that the line is better than the dark line, nor can it be said that the dark line is better than the bright line. But there is one thing to pay attention to: different specifications of the line (such as 2 square and 4 square), when buried, must be isolated with hose or hard pipe classification, the above for the construction of the line, must pay attention to the skills and methods, pay attention to the wiring method, wire installation has a great impact on our future life.

You can get rid of the bad line, and then replace the good line into it, without taking the open line, and you have this aspect in mind when designing.

Yes, because there is only one dark line, and if it is broken, it has to be replaced, so only the bright line can be taken.

It may be more difficult to walk the open line, but it is necessary to make each line neatly stacked without hindering the available walls, which requires good planning and construction.

Not really, because the dark line can be reused as long as it is repaired, and it is not particularly difficult to repair.

Unplug all household appliances first, try again, and if the device is asked and protected, then turn on all the original switches once, that is, it is turned off, now it is turned on, and if it is turned on, now it is turned off. Please try again to see if you are still protected. If there is no protection, turn on another switch to narrow it down and look for faults.

If the first layer is connected to a single protective layer, it is better to use a separate protective layer. If the first layer is connected to a single protective layer, it is done separately. In the decoration, the line is generally a concealed project.

For some newly renovated or aging houses, the hidden lines buried in the wall may have some defects, and it is necessary to pull out the old lines from the wall and replace them.

Unplug the old wire, insert a special nylon wire that can be turned, tape the new wire and wire at the opposite inlet, and pull the wire back so that the new cable passes through the conduit. If there is no wire, it can be replaced with a hard wire or wire. The bedroom includes lighting cables, air conditioning cables, ** cables, TV cables, etc.

The bedside table can reserve the power cord port, and the 5-hole wiring board with the switch is used to reduce the failure of the bedside lamp switch; The power connection port can remain on the dresser. It is also necessary to consider that there should be reflected light on the dresser, and another switch should be installed next to the wire box; Lighting can be single head lamp or ceiling lamp. Multiple headlights should be equipped with sub-controllers, with a focus on switches.

It is recommended to use a dual switch.

The hallway includes power and lighting lines. Lighting can be determined based on the length and area of the corridor. If it is wide, ceiling lights and wall lights can be installed; If it is narrow, only ceiling lights or clear glass can be installed, and switches can be installed outdoors.

Kitchen wiring is divided into power cords and lighting wiring. The power cord can be 4mm2. Due to the need for kitchen appliances, power interfaces can be reserved in different parts according to the needs of the owners for future use of kitchen appliances.

Now the dark line is a large bend special line without joints, to determine that the line is broken, between the switch and the electrical appliances or between the switch and the distribution box, the old has broken two ends from the switch removed, connected to a long enough new line, you can wipe a little dish soap as lubricant, from the other end with pliers to pull out the old line and bring out the new line, it is replaced. The joint must be firm and smooth. Be sure to handle it professionally.

Most of the centralized circuits are concealed, so how to replace and repair the circuit circuits if there are faults such as aging and burning?

First, find the damaged circuit.

If the wire is broken, we can check which section of the circuit is wrong with a tool such as an electric pen or a universal meter. When looking for faults, circuits. You can check the circuit construction drawings at home, which can make it easier for us to determine which circuit is faulty.

Second, replace the broken wire.

You can ask a professional electrician to replace the broken wires, and then when replacing the wires, we need to turn off the electric switch at home, and then remove the switch socket or lamp connected to the broken circuit, so that it can be at the mouth of the wire. Seeing the problem, our family's damaged wire was tied to the skewer and pulled out of the wire. In the next step, we can thread the wire of the heart into the wire pipe through the wire, and then install the switch socket or lamp connected to the circuit.

It should be noted that when carrying out circuit maintenance and transformation, we need to thread the wire into the conduit, and during construction, we need to pay attention to the wire in the conduit can not wear too much, otherwise the wire will not be able to twitch. If there is too much wire threading, in case of wire failure, it will be more troublesome to repair and replace.

First of all, when decorating, the water supply and drainage pipes, weak current wires (cables) and gas pipelines, and materials should be selected with the highest quality. Secondly, it is especially necessary to ensure that the layout of the pipeline is reasonable, the joints are safe and reliable, and meet the installation specifications. Thirdly, if a fault occurs after a period of use, the non-fault line part can be eliminated first, the specific fault point can be determined in a targeted manner, and finally the repair, replacement or complete change of direction, and the new local laying or new way of work can be arranged.

If it is broken, you can first smooth out the wall, then rework, find a professional technician to repair it, buy some pipes and materials with better materials, and find your husband or a reliable person to replace it.

This type of dark groove is usually filled with wire, and it is only necessary to tie a new wire to the wire and pull it through another opening.

Start by finding out the damaged line and use a marker to find out. Then replace it with a new line and ask a professional electrician to replace it.

With the passage of time, the house we live in will slowly become the old house in other people's mouths. If we need to renovate the circuit of the old house, and the circuit can not be re-slotted and embedded under the premise that the renovation can only take the bright line, how should we design it more beautifully?

So, before that question, I'd like to talk about how the topstitch is more aesthetically pleasing. If the circuit is open-wired, then a trunking is necessary. I believe many friends have seen the kind of white pvc square trunking that I often see, and it is indeed low and earthy.

When our "old house" was renovated, it was basically based on modern style, and some of the better conditions may have Chinese decoration or European decoration, which is basically based on these three styles. Then I will now take these three styles of old houses as an example to explain how to take the bright line will not conflict, but can improve the beauty of the old house a little.

If it is an old house decorated in modern style, it is recommended to use stainless steel trunking to walk the circuit. Whether it is a lamp wire or a socket wire, stainless steel trunking can be used to route the wire. Even we can also use the stainless steel trunking as a decorative line to design, which can not only achieve the purpose of threading, but also achieve the local decorative effect of the space!

Whether it is made of rose gold, champagne gold, or even brushed silver or mirrored black titanium, as long as it does not conflict with the original space, it is believed that it can enhance the aesthetics. If in addition to the wiring, by the way, there are some lines on the wall, maybe there will be more surprises.

If it is a Chinese style or a mid-style style, it is still recommended to use stainless steel trunking to walk the open line. However, in terms of color, it is more inclined to use black titanium or champagne gold, mainly according to the color of the furniture.

If the existing Chinese furniture in the old house is mahogany, or light yellow wood furniture, then it is recommended to use champagne gold stainless steel trunking. The color palette does not clash and complements each other to achieve the icing on the cake.

If the existing furniture of the old house is dark, dark and black furniture such as ebony, red sandalwood, and walnut, then it is recommended to use black titanium stainless steel trunking. Not only does the color system maintain a high degree of uniformity, but the black lines added to the room will not feel abrupt.

If it is a European or European-style style, it is recommended to use a curved white PVC trunking or a brushed silver stainless steel trunking. Because of the European style, there will be some plaster lines, white and other elements. At this time, it is not appropriate to use black.

If you want to be able to match, try to choose a light color, preferably white. Therefore, it is recommended to use a curved white trunking or silver stainless steel.

If it is a kind of old-fashioned European-style house, then the stainless steel trunking of champagne gold or even rose gold can also be used. It's almost seamless.

When renovating the old house, it is best to make the open line line, which will be more convenient in the later service process. If there is a problem, it is easier to repair.

It should be a dark line, which is more convenient to operate and has higher safety performance.

I think it's better to do dark lines, it can be more beautiful, and it can be better hidden.

As for light and dark, in fact, there is a big misunderstanding, that is, many owners don't understand what they want, they are all the same, and they are all hidden.

As everyone knows, according to their own decoration needs and style, but also based on their actual needs, the use of open or dark decoration, can not be the same as the clouds.

After all, light and dark have their own characteristics:

In old-fashioned houses, the wiring is basically surface-mounted, some are directly nailed to the wall with sheath wire and line card, and some are wrapped with wire duct. Of course, in many modern rooms, enterprises, etc., open lines are used, mainly based on the convenience of maintenance and modification.

For example, if you don't think about your household appliances at the beginning, it is very convenient to add or remove them later, or change the location of the wiring, or increase or decrease the number of switches and sockets, because it is very intuitive.

Concealed wiring is embedded in the wall or at the top, or underneath. This is called a one-time bit. Needless to say, the advantage is that it is beautiful and you can't see the line. However, this kind of beauty is also a fatal flaw, that is, you can't see the line, and the switches and sockets are dead.

For a simple example, the socket at the head of the bed, many people want to put the bed, then they can only follow the socket at the head of the bed, otherwise there will be no socket at the head of the bed, or you have to move a place, then the socket will leak out, and even become a decoration, and it will be wasted for a long time. There is also the TV wall, some preset lines are on the TV wall, but some owners just don't like to put the TV on this wall, so the embedded pipes and wires have to be scrapped, and they have to be re-slotted.

In other words, all the electrical appliances in the home are basically very depressing and placed in a fixed place, because these places have sockets, and other places do not, for those who like a fixed life, or life is very dull, there are no big changes in people are good, it must be formed. But for those who like to change, or the room increases or decreases things, then these fixed switches and sockets have become a disadvantage that cannot be dismantled, but unfortunately, not dismantled, moved the place, can not reach, and have to be wired separately, laborious.

Secondly, when dismantling and changing the line, the dark line is the most troublesome, if the developer provides you with the layout of the dark line, if not, then imagine changing it, in most cases, it is all the dark line abolished, re-slotted.

Although the exposed wiring looks like the trunking is exposed and looks ugly, it seems practical to some people. In addition, there are now various styles of trunking, square, flat, round, very beautiful shape, at home, office, workshop, etc., if the layout is good, it is also very beautiful, and it can be seen and touched, and it is very convenient to dismantle and change.

Therefore, as for what is good, it must be based on one's own needs and future development, and one cannot simply draw conclusions.