What should I do if the wires in the wall are leaking?

Introduction: When living at home, I feel that the wires in the wall are leaking, at this time we must not be in a hurry, because only by finding a solution can we quickly solve these problems, when determining the wire leakage in the wall, we must find out where the wire in the wall is leaking, this step is very important, in determining the location of the leakage, and then you can change the leakage wire.

In fact, for those who have lived in the house for a long time, leakage is a common situation, if their house leakage is the best way, is to determine the location of the leakage wire, and then change the leakage wire. In daily life, you must know these truths, the main switch at home is a leakage protector, except for this one main switch, the other switches are air switches.

If the wires leak at home, then be sure to make good use of the master switch, and if the wires at home leak, use the shake meter.

Check each circuit well, so that you can accurately determine where the leakage is.

Although this method is a bit troublesome, it is also the best way to eliminate it. After finding the leakage circuit, you can change the wire according to the leakage circuit, so you can solve the problem of leakage of the wire on the wall. However, in some families, the main switch and the sub-switch are leakage protectors, and in such cases, it is also necessary to check each circuit with a shake meter.

However, such a device is a leakage protector compared to the main switch.

Other switches are air switches, which have many disadvantages, and such a design is also a lot of unreasonable. No matter how the circuit at home is designed, after finding that the wires in the wall are leaking, you must not be nervous, calm down to better solve the problem, and then use the shake meter to carefully detect each circuit, so that you can judge the leakage well, and then you can change the line where the leakage is.

First of all, we need to close the main power gate of the house in time. Each circuit should be checked to find the leakage. Deal with the leakage in a timely manner. It can be used normally.

The main switch can be turned off and replaced with a new one, or a leakage protector or leakage tape can be used to solve the leakage situation.

At this time, it is necessary to throw away the wall and pull out the wires to reconnect the electricity, otherwise it will have a serious impact on it, and the damage is also extremely high.

If such a situation occurs, they should find a professional electrician to repair it, and they must not touch the wires casually, which will cause the situation of CLP.

After discovering the leakage, the main gate should be turned off as soon as possible to avoid damage to yourself due to the leakage, and then find the leakage place for maintenance.

First of all, turn off the electric switch, go to a professional master to help deal with it, don't do this kind of thing yourself.

If such a situation occurs, be sure to let a professional person help you solve it, and don't act on your own.

Summary. Hello, I am a master of home problem solving, and I make the following questions about your consultation. Leakage of dark wires, you can follow my method to check.

When you find that the wires in the wall are leaking, you can follow the following steps to investigate the cause: 1. First determine which wire is leaking, and you need to prepare a multimeter or megohmmeter. 2. Turn the multimeter to a gear of more than megaohms, and measure the resistance of the lower neutral wire and the ground wire, the live wire and the ground wire respectively.

If the resistance is less than a megaohm, the wire is leaking.

Hello, I am a master of home problem solving, and I make the following questions about your consultation. Leakage of dark wires, you can follow my method to check for it. If you find that the wires in the wall are leaking, you can follow the following steps to troubleshoot the cause:

1. To determine which wire is leaking, you need to prepare a multimeter or megohmmeter. 2. Turn the multimeter to a gear of more than megaohms, and measure the resistance of the lower neutral wire and the ground wire, the live wire and the ground wire respectively. If the resistance is less than the megaohm, the wire will leak and be transported to Kaibi.

Sun Hand. The best thing to do is to change the thread. But sometimes the wires can't be pulled out, so they can only use a compromise method. Method 1:

It will be somewhat unsightly, but it is also a good way to compromise by re-laying a bright line and letting the faulty line stay in the front wall forever. Method 2: Swap the zero live wire This is only an emergency solution and cannot be used for a long time.

If the leakage current is large, it is useless even if the wire is changed. Method 3: Replace the leakage protection with an air switchThis is the most effective method, and replace the leakage protector of the leakage circuit with an air switch.

Summary: The wires in the wall are leaking, and the electricity is not available to people, so it is okay to replace the leakage protector with an air switch. In the case of a leak, a leakage skin protector can be added behind the leakage.

The solution to the broken wires in the wall of the home is as follows:

The first method is to pull out the original wire and replace the new wire, first we need to find the joints at both ends of the wire, disassemble the wire joints and cut off the bent wire, and then wrap the wire around a large wrench at one end of the wire, and take the wire out of the way by winding the wire on the wrench little by little, instead of pulling the wire directly outward as everyone thinks, and we must also pay attention to the use of the old wire to bring the threading wire in.

The second method is to rearrange the exposed circuit, in order to choose the trunking or the wire wax code tube, remember to buy the best trunking conduit, in addition to the use of structural glue (so that there is no need to play screws on the wall when fixing the trunking), the relevant sticky clip on the line, we first use the structural adhesive to arrange the trunking in our pre-planned trunking position, after the structural glue reaches the strength, put the wire in and then deal with the wire connection beam is completed.

Wire selection criteria

Choose copper core wire: wire, first of all, to good conductivity, there are copper core wires and other wires on the market, copper core wire is the most practical one for interior decoration, but copper core wire is divided into several kinds, there are most of the wheel of which diameter copper core and multi-line copper core.

Wires with strong load capacity: the electricity consumption in the family is sometimes large and sometimes small, and when the maximum we will turn on the TV, turn on the air conditioner, turn on the computer, turn on the lights, turn on the water dispenser, refrigerator, blow dryer, etc., if the load capacity of the wire is not strong, coupled with the hot summer, it is easy to make the wire burn because of the high temperature, resulting in a fire.

Good waterproof performance: Some wires are easy to deform and crack, in case there is a water leak somewhere, then it will lead to electrical appliances burning out, short circuits and even fire and personnel, so it must be hard outer skin and good waterproof wires.

All electrical appliances are inseparable from wires, which mainly play the role of conveying circuits. Generally, the wire is a concealed project, buried in the wall, and its quality is closely related to personal safety and property safety. So will the broken wires leak in the wall?

Let's take a closer look.

1. Broken wires in the wall will leak electricity.

2. Therefore, our hands cannot be directly touched, and electric shock may occur.

3. If the indoor air is humid, the broken wires are easy to be electrified. If the skin of the wire is broken at both ends, then the two wires cannot touch and it is likely to cause a fire.

I don't know if netizens have a new understanding of whether the broken wires will leak in the wall after reading the above introduction?

What should I do if the wires in the wall are leaking?

Hello dear! 1.Because only the main switch is a leakage protector, and each leakage is a tripping switch, it is impossible to confirm which circuit is leaking, and it is necessary to check each circuit one by one with a shake meter; Because the leakage protector trips, only if the leakage current is greater than or equal to 30 mA, then there are several possibilities to trip the leakage protection, for example, the leakage of a circuit greater than or equal to 30 mA will trip, or the sum of the leakage current of several circuits greater than or equal to 30 mA will trip, so we can not use the leakage protection switch to find the leakage circuit; We can only use the shake meter to telemetry each circuit, telemetry the line-to-line resistance and line-to-ground resistance, and then find the leakage circuit and replace the wire.

Hope it helps.

Leakage of wall wires is a very dangerous situation, which can lead to electric shock, fire and other safety hazards. If you find that the wall wire is leaking, you should take measures to deal with it as soon as possible, and the following are several treatment methods:

1.Power failure and emergency treatment: First of all, the power supply of the leakage circuit should be cut off to prevent accidents. The leaking wire can then be cut off with a plastic tool with an insulated handle to prevent the leakage from continuing.

2.If the leakage is caused by moisture, you can use insulating materials to raise the wires to avoid contact between the wires and the damp wall. In addition, it is also possible to wrap the wires with a covering to reduce external influences.

3.Replace the wire: If the wire is aging or damaged and causing leakage, it is recommended to replace the wire. However, before the change can be carried out, the power needs to be cut off, and the wires need to be removed and installed using insulating tools.

4.Seek professional help: Electrical equipment safety is sensitive, so if you can't handle it yourself, it's a good idea to seek professional electrician help. Electricians know how to determine whether there is leakage and take the right way to deal with it to ensure safety.

In short, the leakage of wall wires must be dealt with carefully and should not be taken lightly. In daily life, electrical equipment should be checked frequently to ensure safety. If you find any problems, you should deal with them promptly to ensure the safety of yourself and your family.

If there is a leak of power from the wall wires, turn off the power immediately and make sure all appliances have been disconnected. Then, wrap the wires with insulated rubber gloves or insulated cloth to prevent the current from passing through the body and causing injury. If you can't find the right insulation, you can also consider using professional electrical safety equipment for repair.

At the same time, check the degree of damage to the wire, if the wire has been damaged or charred, then the lack of Kai Kai needs to replace the wire with a new one to ensure safety.

Check it with an electric pen, and after finding the accident point for leakage. Have a professional electrician replace the leaking wires, if they are in the wall. To roll the skin, you need to peel off the wall and re-lay the wires. Hunger for Chang.

When decorating the house, special attention needs to be paid to the arrangement of wires and the quality of wires, because the wires belong to the hidden project, and they need to be embedded in the wall in the later stage, even if they are not embedded in the wall, they will be fixed on the surface of the wall through the pipe, if the operation is not proper or the quality of the wires is relatively poor, then there will be leakage, how to deal with the leakage of wires, and how to prevent wire leakage, these problems must be understood clearly for the people.

What to do after the wire leaks.

After pushing the switch on the leakage protector one by one from left to right, after all the switches are pushed up, the maintenance personnel need to stand on the insulator, and then connect the three wires to the line below the switch, so that they can find out which line has leakage.

Which electrical appliances in the home will cause leakage in the line.

1. Refrigerator.

Because when the refrigerator is working, its power is very large, and after the refrigerator thermostat is used for a long time, it will be damaged, and once the controller is damaged, it is easy to leak.

2. Washing machine.

Because the washing machine needs to be cleaned by water when washing clothes, there may be some water dripping into the motor of the washing machine, which is prone to leakage, so after washing the clothes, you must pay attention to ventilating the washing machine.

3. Electric blanket.

The leakage of the electric blanket is generally caused by the capacitor, because when the contact area between the human body and the electric blanket is relatively large, the capacitor will automatically leak, so the electric blanket should be turned off before going to bed.

How to do a good job of wire leakage measures.

First of all, it is necessary to be able to make the current in all the wires in the home not exceed the safe current that the total power supply can carry.

Secondly, do not let the wires at home be damp, heated or corroded, and when the wires encounter places that are easy to touch, you must take protective measures.

In addition, you must remember to check all the wiring at home regularly, and find that the line is aging or the core is leaking.