The wires in the wall are leaking, how to solve it?

If such a situation occurs, they should find a professional electrician to repair it, and they must not touch the wires casually, which will cause the situation of CLP.

After discovering the leakage, the main gate should be turned off as soon as possible to avoid damage to yourself due to the leakage, and then find the leakage place for maintenance.

First of all, turn off the electric switch, go to a professional master to help deal with it, don't do this kind of thing yourself.

If such a situation occurs, be sure to let a professional person help you solve it, and don't act on your own.

Introduction: When living at home, I feel that the wires in the wall are leaking, at this time we must not be in a hurry, because only by finding a solution can we quickly solve these problems, when determining the wire leakage in the wall, we must find out where the wire in the wall is leaking, this step is very important, in determining the location of the leakage, and then you can change the leakage wire.

In fact, for those who have lived in the house for a long time, leakage is a common situation, if their house leakage is the best way, is to determine the location of the leakage wire, and then change the leakage wire. In daily life, you must know these truths, the main switch at home is a leakage protector, except for this one main switch, the other switches are air switches.

If the wires leak at home, then be sure to make good use of the master switch, and if the wires at home leak, use the shake meter.

Check each circuit well, so that you can accurately determine where the leakage is.

Although this method is a bit troublesome, it is also the best way to eliminate it. After finding the leakage circuit, you can change the wire according to the leakage circuit, so you can solve the problem of leakage of the wire on the wall. However, in some families, the main switch and the sub-switch are leakage protectors, and in such cases, it is also necessary to check each circuit with a shake meter.

However, such a device is a leakage protector compared to the main switch.

Other switches are air switches, which have many disadvantages, and such a design is also a lot of unreasonable. No matter how the circuit at home is designed, after finding that the wires in the wall are leaking, you must not be nervous, calm down to better solve the problem, and then use the shake meter to carefully detect each circuit, so that you can judge the leakage well, and then you can change the line where the leakage is.

First of all, we need to close the main power gate of the house in time. Each circuit should be checked to find the leakage. Deal with the leakage in a timely manner. It can be used normally.

The main switch can be turned off and replaced with a new one, or a leakage protector or leakage tape can be used to solve the leakage situation.

At this time, it is necessary to throw away the wall and pull out the wires to reconnect the electricity, otherwise it will have a serious impact on it, and the damage is also extremely high.

All electrical appliances are inseparable from wires, which mainly play the role of conveying circuits. Generally, the wire is a concealed project, buried in the wall, and its quality is closely related to personal safety and property safety. So will the broken wires leak in the wall?

Let's take a closer look.

1. Broken wires in the wall will leak electricity.

2. Therefore, our hands cannot be directly touched, and electric shock may occur.

3. If the indoor air is humid, the broken wires are easy to be electrified. If the skin of the wire is broken at both ends, then the two wires cannot touch and it is likely to cause a fire.

I don't know if netizens have a new understanding of whether the broken wires will leak in the wall after reading the above introduction?

What should I do if the wires in the wall are leaking?

Hello dear! 1.Because only the main switch is a leakage protector, and each leakage is a tripping switch, it is impossible to confirm which circuit is leaking, and it is necessary to check each circuit one by one with a shake meter; Because the leakage protector trips, only if the leakage current is greater than or equal to 30 mA, then there are several possibilities to trip the leakage protection, for example, the leakage of a circuit greater than or equal to 30 mA will trip, or the sum of the leakage current of several circuits greater than or equal to 30 mA will trip, so we can not use the leakage protection switch to find the leakage circuit; We can only use the shake meter to telemetry each circuit, telemetry the line-to-line resistance and line-to-ground resistance, and then find the leakage circuit and replace the wire.

Hope it helps.

Yes. 1. According to the relevant person in charge of Xi'an Safety Supervision Bureau, after the plastic insulated wire is used for a long time, the plastic will age and crack, and the insulation level will be greatly reduced. In addition, once the wall is damp, it will cause large-scale electricity leakage, endangering personal safety.

2. The relevant Xi'an Municipal Safety Supervision Bureau said that it is not necessary to buy fake and shoddy products; Household appliances should have complete and reliable power cord plugs and grounding protection; The ground wire cannot be connected to the water and gas pipelines; Wet hands should not touch live equipment; Do not privately pull the wires; Disconnect the power supply when inspecting and repairing household appliances; Replace the power cord immediately if it is damaged; In case of household appliance fire, the power should be cut off first and then the fire should be extinguished.

3. Precautions for household safety electricity:

1) All switches, switches, and fuses must have covers. Bakelite covers must be replaced if they are aged or incomplete.

2) Do not drag and drop the power cord on the ground to prevent the power cord from tripping people and to prevent damage to the insulation.

3) When the household appliance is found to be sparking, smoking or burning smell after being energized, it should be stopped immediately and the power supply should be cut off for inspection.

4) Be sure to cut off the power supply when moving household appliances to prevent electric shock.

5) The area around the heating appliance must be kept away from flammable materials. Electric stoves, heating stoves, electric irons and other heating appliances shall not be placed directly on the wooden board to avoid disasters.

6) It is forbidden to touch the live switch with wet hands; It is forbidden to pull out or plug in the power plug with wet hands; When unplugging or plugging in the power plug, the fingers should not touch the metal part of the contact; Electrical components or bulbs cannot be replaced with wet hands either.

7) For household appliances (such as hair dryers, soldering irons, etc.) that are often used by hand, do not wrap wires around your hands.

8) When the power wire needs to be cut off in an emergency, it must be used with insulated electrician's pliers or a knife with an insulated handle.

9) When rescuing the electrocuted person, first disconnect the power supply or pick up the power cord with a wooden board or insulating rod, and never drag the electrocuted person directly by hand to avoid serial electric shock.

Summary. Hello, I am a master of home problem solving, and I make the following questions about your consultation. Leakage of dark wires, you can follow my method to check.

When you find that the wires in the wall are leaking, you can follow the following steps to investigate the cause: 1. First determine which wire is leaking, and you need to prepare a multimeter or megohmmeter. 2. Turn the multimeter to a gear of more than megaohms, and measure the resistance of the lower neutral wire and the ground wire, the live wire and the ground wire respectively.

If the resistance is less than a megaohm, the wire is leaking.

Hello, I am a master of home problem solving, and I make the following questions about your consultation. Leakage of dark wires, you can follow my method to check for it. If you find that the wires in the wall are leaking, you can follow the following steps to troubleshoot the cause:

1. To determine which wire is leaking, you need to prepare a multimeter or megohmmeter. 2. Turn the multimeter to a gear of more than megaohms, and measure the resistance of the lower neutral wire and the ground wire, the live wire and the ground wire respectively. If the resistance is less than the megaohm, the wire will leak and be transported to Kaibi.

Sun Hand. The best thing to do is to change the thread. But sometimes the wires can't be pulled out, so they can only use a compromise method. Method 1:

It will be somewhat unsightly, but it is also a good way to compromise by re-laying a bright line and letting the faulty line stay in the front wall forever. Method 2: Swap the zero live wire This is only an emergency solution and cannot be used for a long time.

If the leakage current is large, it is useless even if the wire is changed. Method 3: Replace the leakage protection with an air switchThis is the most effective method, and replace the leakage protector of the leakage circuit with an air switch.

Summary: The wires in the wall are leaking, and the electricity is not available to people, so it is okay to replace the leakage protector with an air switch. In the case of a leak, a leakage skin protector can be added behind the leakage.

It should be inductive electricity, and the electric pen can be lit, but because the current is extremely small, it is not harmful to the human body.

If the single-pole circuit breaker with leakage protection is the power control master switch, the circuit breaker only has one pole as the control live wire, and the neutral line is actually straight through the end of the line. Described may be not according to the sign wiring caused by zero, live wire misconnection, become control zero line, live wire directly through the load circuit to form the whole line live, the zero fire of the switch can be solved.

It could be that the switch just turned off the neutral line. The electrician's work is not standardized. Get an electrician to recheck and replace.

In this case, the electric switch knife in your home is that the circuit breaker only controls the zero line, and the connected live wire is not turned off, and the switch of your electrical equipment is still on, so when you use the electric tester to measure the line of the electrical appliance, there is electricity. You can measure whether the incoming wire of your electric switch is the live wire or the neutral line, and then change it, but pay attention to safety.

There is still electricity after the gate is closed, which may be the leakage of your electricity source, or it may be the leakage of other users. You check your power cord to see if there is any wear on the wire, if it is a dark wire, or if there is a leakage from other users, you can't do anything.

Wire leakage is mostly caused by wire aging, poor contact, and even moisture. If the wires leak at home, you should find an electrician for rectification in time. Home is a happy harbor, and to ensure that the whole family lives safely in a special environment, it is necessary to use electricity safely and foolproofly.

The leakage of wires at home should first find out what the cause is, and then rectify and solve it in a targeted manner: if it is caused by the aging of the wire, it is necessary to replace the new wire; If it is caused by poor electrical contact, the wire box should be reinserted or replaced; If it is caused by the wrong connection between the neutral wire and the live wire, you need to find an electrician to replace the live wire connector again. The leakage of electrical wires at home should be investigated in time to eliminate the potential safety hazards of household electricity in time.

Wire circuit, ask the electrician to check whether the wires and sockets at home are aging, I am an electrician may not be able to help you, I don't know where you are.

Have an electrician fix it. Water, fire, and electricity are ruthless, pay attention.

There will be no electricity on the zero line, if there is, it must be a problem, please ask an electrician to take a look.

Ask a professional to solve it, and it's better not to fool around if you don't understand it's dangerous.

It must be a string line, find the line from the beginning.

If the wire is damaged and leaking at home, it is necessary to find out which wire is damaged first, and then rectify and solve it in a targeted manner

1) Disconnect all switches or plugs, including lights, distribution boxes, and household switches;

2) Then turn on the entrance switch, turn on a room switch in the distribution box, and then turn on the electrical appliances and lights in the corresponding room;

3) Check the switches in the distribution box in turn, and if the leakage protector trips when the switch is opened, that is, the line is damaged or the electrical leakage is leaked.

If you open the electrical leakage protector and trip, you can use other electrical appliances instead of trying, if you also trip is the line leakage, if you do not trip is the electrical leakage, you need to send the electrical appliances for repair.

If the wire is damaged and leaking, the wire will be withdrawn and replaced with a new one.

If the buried wall wire can not be extracted, it can only be re-taken to the open line, and the open line can be laid with a wire slot.

You can use a shake meter, that is, a megohmmeter, if you don't use a multimeter multiplied by 10k gears, you can also use it.

Leakage trips are not timely, and they do not jump immediately.

* This article is adapted to the room in Ann.

BAI is equipped with a shunt leakage switch.

du's line, zhi can be quickly handled in the following ways:

1.Disconnect all special electrical appliances from the wiring.

genus open; 2.Adjust the switches of all lamps to the open position; (The state of the lamp is not energized) 3Adjust the shunt switch to the open position; (The circuit is not energized)4Close the main circuit switch; (The state of the line being energized).

5.Then close the shunt switches one by one;

If one of the shunt switches is closed, if it trips or cannot be closed, it means that the route is leaking.

Buy a leakage detector, extend the wires on the wall, and there will be an alarm in the leakage place.