-
Answer: In the self-built houses in the countryside, I think it is better to take the dark line by taking the electric wire, and the practice of taking the bright line is outdated, and the specific benefits are as follows:
Nowadays, self-built houses in rural areas have gradually had higher requirements for aesthetics and practicality.
In the past, when houses were built, they were all mud and adobe houses or wooden tile houses, and the use of electricity at that time was relatively simple, just lighting, so the wires at that time were installed on the walls, and the wires would turn black or have cobwebs over time.
It is clear that this situation is outdated.
Nowadays, when building a house, drawings and functional design will be considered in the early stage, and because the electricity consumption at home is now more abundant, the use of more electricity is much higher than before. Therefore, it is completely possible to take the circuit and waterway into account in the wall. In this way, in the later stage, even if some function points are not well considered, slotting and rerouting can be carried out, and the aesthetics of the later stage are very high.
1. The wire is dark, which is more beautiful.
In the self-built house, the later decoration is gradually similar to the urban interior decoration style, the main point is to hide the wires, so that the wall and top surface appear cleaner, especially in the later stage, there will be no cobwebs and other dust, and the interior is more refreshing and beautiful.
If you use the surface-mounted method, there will be buckles on the wall and on the top, and it is very difficult to plan the path of these buckles, and it will look messy if you don't pay attention to it.
2. The wire is dark, which is safer.
Regardless of **, safety is always our primary consideration, after the wire is buried, there is naturally no worries, as long as the concealed wire can twitch freely, it is even more foolproof.
In addition, it is an indisputable fact that the exposed pipeline is also prone to fire, while the concealed pipeline is not easy to produce greater harm in the cement wall.
Therefore, I think that the circuit in the current self-built house should be considered in advance, and then it should be buried in the dark, as long as you pay attention to the planning and construction of the installation circuit, and save the image of the construction in the later stage for later inspection, which is more practical than the surface-mounted circuit.
-
Dark lines are better to look more aesthetically pleasing, and they don't look messy and look very clean and tidy.
-
It is better to press the open line, because in this case, the decoration will be more tidy, and at the same time, there will not be too many wires exposed in the home, otherwise it will be very messy.
-
It would be better to take the dark line, because the dark line is very beautiful, and it is also very popular to take the dark line, and the dark line is also particularly safe.
-
You should use dark lines, because it will look like the inside of the home will be very beautiful, and the walls will look very clean.
-
I think it would be better to take the open line when building a house in the countryside, because there are a lot of equipment measures in the countryside, and the work is not perfect enough, and if you take the open line, it will be more conducive to future construction and repair.
-
The dark line should be taken. Because the dark line does not take up a lot of space, it is also more convenient, and the dark line is also more beautiful.
-
It should take the dark line. In this way, it is very beautiful at home, and it is also safer when using it.
-
Nowadays, every household in society cannot avoid using electricity, and the invention of electricity has brought great convenience to our lives, so almost no one can live without electricity. When decorating a house, some people like to use bright lines, some people like to use dark lines, and for me personally, I think it's better to use dark lines, for the following reasons. <>
1. Use dark lines to make it more beautiful.
The dark line is inside the wall, and you can't see one after another Unicom wires, only the jack we have reserved. And if you take the bright line, we can see every line, for me, there are one line after another in the house is very beautiful. And now we use dark lines in our own house, which looks very beautiful after decoration.
Second, the dark line is safer.
Because the lines in the dark wire are buried in the wall, it is not easy for people to come into direct contact, and if the wire fails, the open wire is more likely to cause danger to people, but after the dark wire is blocked by the wall, the safety factor is much higher. Especially there are some naughty children in the family, who always like to touch this and that, if the pipe of the open line is broken, the child is more likely to be in danger, and the dark line does not have this worry. <>
Third, the dark line is less likely to be destroyed.
Generally speaking, as long as the quality of the wire used is relatively good, the dark wire will not break if it can be used for decades. And it is also difficult to cause damage to the dark line by man, unless the wall is demolished later. But the open line is different, it only has a layer of pipe protection, maybe there are mice in the house can bite through the line, and it is easy to operate if someone wants to damage it maliciously.
In addition, if the pipe is exposed to the outside, it will slowly age, and the service time is relatively short.
Of course, the dark line is not only advantageous, it also has some inevitable disadvantages, such as the difficulty of construction, and if you want to carry out hydropower transformation, it also needs more complex operations, so whether to install the bright line or the dark line, you must make the most suitable decision through a number of comparisons.
-
It is best to use open wires, because some household appliances need to be moved back and forth, and dark wires are more inconvenient.
-
As for light and dark, in fact, there is a big misunderstanding, that is, many owners don't understand what they want, they are all the same, and they are all hidden. As everyone knows, according to their own decoration needs and style, but also based on their actual needs, the use of open or dark decoration, can not be the same as the clouds. After all, light and dark have their own characteristics:
In old-fashioned houses, the wiring is basically surface-mounted, some are directly nailed to the wall with sheath wire and line card, and some are wrapped with wire duct. Of course, in many modern rooms, enterprises, etc., open lines are used, mainly based on the convenience of maintenance and modification. For example, if you don't think about your household appliances at the beginning, it is very convenient to add or remove them later, or change the location of the wiring, or increase or decrease the number of switches and sockets, because it is very intuitive.
Concealed wiring is embedded in the wall or at the top, or underneath. This is called a one-time bit. Needless to say, the advantage is that it is beautiful and you can't see the line.
However, this kind of beauty is also a fatal flaw, that is, you can't see the line, and the switches and sockets are dead. For a simple example, the socket at the head of the bed, many people want to put the bed, then they can only follow the socket at the head of the bed, otherwise there will be no socket at the head of the bed, or you have to move a place, then the socket will leak out, and even become a decoration, and it will be wasted for a long time. There is also the TV wall, some preset lines are on the TV wall, but some owners just don't like to put the TV on this wall, so the embedded pipes and wires have to be scrapped, and they have to be re-slotted.
In other words, all the electrical appliances in the home are basically very depressing and placed in a fixed place, because these places have sockets, and other places do not, for those who like a fixed life, or life is very dull, there are no big changes in people are good, it must be formed. But for those who like to change, or the room increases or decreases things, then these fixed switches and sockets have become a disadvantage that cannot be dismantled, but unfortunately, not dismantled, moved the place, can not reach, and have to be wired separately, laborious. Secondly, when dismantling and changing the line, the dark line is the most troublesome, if the developer provides you with the layout of the dark line, if not, then imagine changing it, in most cases, it is all the dark line abolished, re-slotted.
Although the exposed wiring looks like the trunking is exposed and looks ugly, it seems practical to some people. In addition, there are now various styles of trunking, square, flat, round, very beautiful shape, at home, office, workshop, etc., if the layout is good, it is also very beautiful, and it can be seen and touched, and it is very convenient to dismantle and change. Therefore, as for what is good, it must be based on one's own needs and future development, and one cannot simply draw conclusions.
Questions. Ok thanks. It's okay dear.
-
It is better to use dark wires for home installation wires, because dark wires are hidden, they are not easy to be touched, they are not easy to cause electric shock problems, and they look beautiful and the home is clean.
-
Home installation wires, open wires and dark wires have their own benefits, the use of open wires is easy to maintain. But dark lines can make the whole room look aesthetically pleasing.
-
I think it's a dark line. Because the shoreline is more beautiful. Although it is easy to find when there is a problem in Minxian, it is really unsightly in the decoration process.
-
Dark wire wiring method:
1. Selection of rigid plastic pipes. The wiring pipe should be made of thermoplastic rigid pipe, such as polyethylene or polyvinyl chloride. It has the characteristics of easy bending, good elasticity, high mechanical strength, flame retardant and so on. The thickness of the pipe wall is not less than 3mm.
The thickness of the tube is determined by the number of lines to be drawn. As a general rule, the total cross-section of all wires (including insulating sheaths) in a concealed wire installation does not exceed 40% of the pipe cross-section, so the diameter of the wiring pipe can be determined accordingly.
2. Bending of hard plastic pipes. Thermoplastic tubing can be locally heated bending method close to the curved part of the thermoplastic tubing, rotating and moving back and forth after baking slightly softer, the tube wood, hand pressure down on the bent ends of the tube, no wood can be bent by bending the tube in thick wood, too hand bending. The bending radius should not be too small, otherwise the thread will be difficult to machine.
3. Then it is necessary to understand the connection of the hard plastic pipe installed in the dark line, the thermoplastic hard pipe can be directly inserted after local heating, the first two pipes are treated with chamfering, and then the plug is evenly heated and baked, and the plug is inserted into the outer tube part of the adhesive after softening the insertion force, and the insertion length is about the diameter of the tube, which can ensure a certain firmness.
-
Rural areas are generally walking the ceiling and wall, the wall PVC pipe is not easy to repair once there is a problem, and now the ceiling is not as straight as before, there is a long line reserved.
-
It is best to do the ceiling to go to the ceiling, the trunking is beautiful and easy to overhaul, the wall or the ground can only open the trunking to do the burial, the casing (that is, the PVC pipe) is placed at the turn of the wire box (junction box), as long as the casing is straight, no matter how long the threading is no problem.
-
Many people in the decoration of the house, will be entangled in the wire is better to install the bright line or the dark line, in fact, I think of course it is better to install the concealed, otherwise why is the home decoration mainly with the dark line paving method, do you think the current owners and decoration companies are stupid?
1. Advantages of concealed vs surface-mounted.
1. Beautiful. There is no doubt about the aesthetics of concealed wires, burying the wires so that they cannot be seen from the outside, and do not affect the rest of the room design in the slightest.
2. Safety. Do you say it's the safety of wires hidden underground or the wires that are exposed? Surface-mounted wires, not only after the wire fails, the chance of direct contact with the human body increases the chance of electric shock, but also the probability of being damaged.
Sometimes when the table is pushed, the wires are crushed; As soon as the water in the quilt was spilled, the wires were soaked.
3. Lifespan. Excluding the possibility of man-made damage, the speed of natural aging of wires, and the faster surface-mounted wires. The reason for this is that the air circulation speed on the surface of the surface-mounted wire is fast and the temperature changes significantly, which accelerates the aging rate of the line.
Generally speaking, if the life of the concealed wire is 10 years, the exposed wire will not exceed 7 years.
But surface-mounted wires are the cost of building materials. Exposed wires require the use of BVVB or RVV wires, which cost much more than BV wires and BVR wires.
Second, the disadvantage of concealed vs exposed installation.
1. It is difficult to construct.
Concealed wires need to be slotted, so the construction difficulty must be greater than that of surface-mounted wires. Here are these three problems: first, the increase in construction costs, as I have just said; the second is the extension of the construction period, which is easy to understand; The third is the technical requirements, such as the depth of slotting, the direction of wiring, etc., which is not a job that ordinary people can do.
Some people say that concealed slotting will damage the building, which I disagree with. As long as the construction is carried out in accordance with the rules, the slotting depth is controlled, the slotted wall is found, and the holes are not opened at will, there will be no problem. As for the destruction of the building structure during the construction process, it is purely technical.
2. It is difficult to maintain.
Once there is a problem with the wire, the exposed wire is better to operate, whether it is to find the fault point or replace the wire. But then again, as long as the quality of the wires you buy during the renovation is good enough, and the construction personnel operate in accordance with the rules during the laying process and do not damage the wires, it is basically not a problem to use them for decades.
-
Is it better to decorate with a bright line or a dark line? Different lives have different views on this issue. The subjective bright line is good, which is due to good maintenance in the later stage; The subjective dark line is good because the line cannot be seen, and the aesthetics are stronger.
But which one is better, there is no result. Today, I will introduce to you whether it is better to take the bright line or the dark line for decoration, and which is more affordable for the decoration to take the bright line or the dark line.
Is it better to decorate with a bright line or a dark line?
1. Is it good to take the bright line for decoration? If you take the bright line, the cost of various decorations will be relatively small, and there is a good heat dissipation function, if there is a problem in the later stage, it is better to repair, and it will not produce too much rectification cost. As long as the open lines are neatly arranged, it is also very beautiful.
In addition, the installation of open lines is also a way to save time and effort and money, in the later wiring, you can cleverly use the interior decorations, the open lines along the corners, the door frame side walk, so as not to make the indoor line messy, bring a certain aesthetic effect. And there is no need to dig grooves, bury pipes and other processes, which can save a lot of money.
2. Is it good to decorate the dark line? Everyone should know that if you want to decorate the dark line, it will not only consume more budget, but also be very troublesome when there is a problem in the later stage. However, after installing dark lines, you can hide the messy lines, play a good decorative effect, and improve the sense of space in the room.
Nowadays, when most people are decorating a new house, they choose to go dark in order to make the interior more beautiful.
Which is more affordable, the decoration is the bright line or the dark line.
1. Because the aesthetic effect brought by the dark line is very strong, it has become the first choice for most people, and the dark line also has a particularly large use, that is, to ensure the safety of family members, especially if there are children at home, the risk of electric shock can be avoided. The maintenance of the open line is not as troublesome as the dark line, and the maintenance is very fast if there is a problem with the line.
2. As far as the current wire brand is concerned, the life span is usually about 50 years, so it will be better to take the dark line than the bright line, but it will be more expensive.
3. If it is a bright line, then a family needs to use a wire of about 150m, which is about 4 6,000 yuan, and the key to the specific wire depends on the brand and quality of the wire. If you take the dark line, in addition to spending money to buy wires, it also includes about 200 yuan for slotting and dozens of yuan for leveling the ground. The ** that goes dark is much higher than the ** that goes bright *.
After reading the decoration is better to take the bright line or the dark line, and which is more affordable to take the bright line or the dark line for decoration, you should understand it now. Although it is said that taking the dark line will be much more expensive than taking the bright line, most people still choose to take the dark line, because the dark line is safe and the aesthetics are strong.
Generally speaking, only those who have deposited the housing provident fund can apply for a housing provident fund loan, even if it is a rural household registration, as long as their unit pays the housing provident fund, then they can apply for a housing provident fund loan. The conditions for applying for a housing provident fund loan are: 1. The borrower must have a permanent urban residence or valid residence status in the city; 2. Push forward from the date of application, and pay the housing provident fund in full for more than 12 consecutive months (only one person is allowed to take out a loan if both husband and wife have paid the provident fund); 3. There are contracts (agreements) and related materials for purchasing, building and overhauling self-occupied houses in accordance with the law; 4. Have a certain proportion of self-raised funds. >>>More
If the rural house does not have a property ownership certificate, it should be handled in a timely manner. According to the provisions of the "Housing Registration Measures", the following materials shall be submitted when applying for the initial registration of house ownership due to the legal construction of a house: >>>More
The five elements of self-built house design mainly include kitchen design, living room design, bathroom design, bedroom design and sloping roof design. >>>More
All localities have a set of standards for the homesteads used in rural homesteads that are in line with the actual local people's conditions, and in accordance with the standards, the homesteads for rural housing applications are examined and approved. The standard area of each household base is 80-120 square meters, and each village committee shall determine the standard of homestead area of the village according to the village plan and the actual land use of the village. Generally speaking, the total land area of a 1-2 person farmer household shall not exceed 95 square meters; The total land area of a rural household with 3 or more persons shall not exceed 125 square meters; The total land area of the original site shall not exceed 140 square meters, of which the building area shall be determined according to the planning of the specific plot and related technologies, and the specific standards announced by the local ** department shall prevail. >>>More
It is decided on a case-by-case basis. If the rural house is built in the middle of a house and the height is not prominent, there is no need to set up a separate direct lightning strike facility, and only need to install a lightning arrester or surge protector at the power inlet of the house to avoid lightning and high voltage along the power line into the house equipment. >>>More