AMD 7750 is generally over

The early 7750 black box (before April) has a stronger overclocking ability, I bought it in February this year and produced it in 08 45 weeks, silent electricity (the original fan can be overloaded, run or stable, it can also be on, but it is unstable. Pressurized to the point that it can be stabilized, and it can be up after changing the fan, but it is extremely unstable. Later, I bought 7750 for a few friends, and I feel that the overclocking ability is getting worse and worse, and the black box is generally silent to the limit, and the highest of the general box can't run or, and some pressurized 3G can't go up.

When overclocking, the motherboard, memory and heat dissipation are also very critical, some motherboards secretly add voltage, relatively speaking, it is not easy to overtake, on the contrary, the lower the silent electricity of U, the higher the overspeed.

If yours is a black box, it's normal, and the general box is good. In short, the 7750 of the 65nm process don't expect to be too high, after all, there are not many things to drop the pie, I hope mine will satisfy you.

I wanted to come up with 7750, and I was originally on it, but I retired all of a sudden. I was very annoyed. There was no response at all when I pressed the switch.,As a result, I got on the antique 3200+ woo.。。。

I can only go up to 3G

As soon as it is fully loaded, it will be a blue screen.

Your poor. Mine is worse.

The temperature of 7750 is too high, and it is too much over, beware of fire.

Dual-core, 1800 front-end, 95W power consumption.

AMD X2 7750 7850 are all dual-core, but their TDP is more than 100W, the reason is that 7750 7850 is a model obtained from the quad-core X4 9650 9850 shielding 2 cores, the performance is actually quite poor, and it is not as good as Intel's E5200...

AMD's old dual-core power consumption is relatively high! Eliminate!

AMD7750 This U is good than AMD5000 5600 These are better AMD7750 I have noticed before Generally, just use the original fan to exceed it If you change a better fan, it is not good, no matter how high it is, after all, it is not 45mm process The heat is hovering between Pentium E5200 and AMD7750 when I first chose the CPU, initially it was inclined to 7750, but then I chose E5200, Until now, I still think that the E5200 is a wise choice! ^_

It is possible to open 4 cores when the CPU has shielded cores.

Your CPU doesn't have it, and you can die of this heart.

Other than that. Your CPU sets the voltage to, then sets the octave to 14, and the outer frequency goes directly to 250. The memory is set to 800. Memory latency changed to 55

515252t

Turn it on, and if it's successful, use it like that.

If the jumper is unsuccessful, the BIOS is restored.

Then press the above settings again, and the memory is set to 667.

Frankly. The speed of both CPUs is about the same, and there is basically no big difference.

The HT bus of 5000+ is 1000MHz, the main frequency is yes, and there is no L3 cache.

The 7550 is a 1800MHz HT bus, the main frequency is yes, there is 2ML3 cache, and it is a K10 core, which will theoretically be better than 5000+.

However, in terms of actual performance, in actual testing, it is almost the same, basically there is no big difference, maybe 7550 is just a good point. However, the power consumption and temperature of the 7750 are higher than that of the 5000+. Personally, 5000+ is fine.

Anyway, it's all about the same CPU.