Why does the Nubia Z7mini motion answer sometimes fail

hi！Hello, are you talking about somatosensory answering? In order to prevent misanswering when a call comes in, there are two indicators for somatosensory answering, one is the hand-shaking action judged by the acceleration sensor, and the other is the action close to the ear judged by the distance sensor.

When the somatosensory answer of the mobile phone, the mobile phone should be in a more obvious acceleration environment, that is, it needs to be faster, otherwise, you can consider backing up the data to the mobile phone, and then re-clear the current system, and then re-set it to see, if it can't be solved, it is recommended to go to the after-sales service or return to the factory for testing and processing.

Somatosensory answering is not yet mature.

Dear, if you are sure that normal use is always out of order, it is recommended to go to the after-sales maintenance.

It turned out that it wasn't just me who came across.

Occasionally. Quiet, so elegant. Elegance is a kind of indifferent beauty, the exposure of a person's inner beauty.

Elegant people's hearts are like stopping water, not shocked, not happy with things, not sad with themselves. Life longs for an elegant life, but often loses itself in reality and goes with the flow. If you want to find yourself and be an elegant and calm person, you can only stabilize yourself, calm down, and learn to be tolerant, benevolent, gentle, and humble.

Life is calm because of quietness, and excellent because of calmness.

Nubia Z7 is the flagship model of Nubia mobile phone, each parameter is the mainstream of the current models on the market or higher than other models, the mobile phone supports 4x digital zoom and optical image stabilization, the pixel reaches 13 million, and is equipped with Qualcomm 801 quad-core CPU. The phone was unveiled in Beijing on July 8.

Recalibrate the proximity sensor with * and * (the use of * calibration must be unobstructed, not filmed, and the surface must be clean); Note: The calibration sequence must be entered * calibration first and then * calibration), when using * calibration, you need to use your hand to block the sensor interface (your hand is about 3-7cm away from the sensor interface), and click "Start Calibration" after the "Infrared Signal Percentage" turns green until the calibration is completed. If it doesn't work, go to after-sales.

You'd better get a new one, and it's not expensive.

The "flying time" method calculates the distance to the object by measuring the time interval by emitting a particularly short pulse of light, measuring the time from the time the light pulse is emitted to the time it is reflected back by the object.

If the flashlight cannot be used, it may be a hardware failure, or it may simply disable the permission to use the camera flash when the flashlight is set up locally.

1. Turn on the nubia camera, turn on the forced flash at the top left of the screen, take a picture to see if the flash can work properly. If it can, it means that the hardware is fault-free, and at this time, you can turn on Nubia - Application Management - Camera - Flashlight, set to "Allow"; Or it may also be that some third-party mobile phone management software is installed on the phone, and the application permission of the flashlight: turn on the camera flash is disabled, which can be checked locally.

2. If the camera's forced flash is not working, it means that there may be a hardware failure. At this time, you can consult nubia for professional after-sales technical support.

hi！Hello, is the forced flash of the auto mode available in photo mode? If available, troubleshoot hardware issues.

Are you using a third-party phone management software that disables the permission to turn on the camera flash? Please check for yourself.

If not, you can turn on Bullshield - App Management - Camera - Flashlight: Allow. If the self-test still fails, please go to a Nubia after-sales outlet for testing.

After-sales service center inquiry.

The mobile phone can't be turned on, you can check the cause of the problem locally first, 1. The battery is drained.

You can first try to connect the nubia phone to the original charger and data cable, charge it for half an hour, and press and hold the power button for 12 seconds to force it to boot up.

2. System upgrade and factory reset.

After the phone is upgraded or factory reset, the first reboot needs to reload the system program, at this time, the waiting time is relatively long, users can keep the phone has enough power on the premise, wait patiently for the system to load. After the system program is loaded, the phone will boot up normally and enter the desktop.

3. Problems such as mobile phone flashing failure to become bricks, mobile phone water, and violent impact.

If the mobile phone is flooded, violently impacted, dropped, etc., resulting in the inability to turn on normally, you can choose the nearest mobile phone manufacturer Nubia after-sales outlet for after-sales service support.

The solution is as follows:

You can press the power button for 12 seconds to see if it can be turned on.

If it doesn't work, it may be that the battery can't be turned on due to overdischarge, you can connect the original charging number to charge for half an hour, and then press and hold the power button for 12 seconds.

If it still can't be turned on, it is recommended to take the mobile phone to the after-sales service of the mobile phone and find a professional to help test it.

hi！Whether your phone film blocks the sensor, in the phone's electrician, application management, self-start management, close the self-start software, and usually clean up the background software. Look inside your phone's electrician, settings, turn off lock screen cleanup, wake up alignment and quickly hibernate look.

You can also calibrate the sensor by using * and * to recalibrate the proximity sensor (using * calibration must be unobstructed, not filmed, and requires a smooth surface);

Note: The calibration sequence must be entered * calibration first and then * calibration), when using * calibration, you need to use your hand to block the sensor interface (your hand is about 3-7cm away from the sensor interface), and click "Start Calibration" after the "Infrared Signal Percentage" turns green until the calibration is completed.

If none of the above methods can solve the problem, you can choose to contact the nearest Nubia official after-sales customer service center (click on the query address).

Inspect and repair your phone.