How to set up a Wi Fi relay, how to set up a wireless wifi repeater?

Setup for router trunking and bridging.

The first wireless router:

1.First, log in to the router that is connected to the Broadband Modem.

2.Set the SSID number and Channel in Wireless Settings - Basic Settings, and set the fixed channel number.

3.Set the wireless signal encryption information in the Wireless Settings - Wireless Security Settings to record the SSID, channel, and encryption settings of the wireless router after setting.

Second Wireless Router:

1.Log in to the second wireless router that needs to be bridged.

2.In the network parameters - LAN port setting, change the IP address to be different from the first router (to prevent IP address conflicts), for example, save, the router will automatically restart.

4.Select the SSID number of the first router in the list of scanned signals and click "Connect".

5.Set the channel to be the same as the first router channel. At the same time, set the encryption information to be the same as the first router, and click "Save".

6.Shut down the DHCP server. In the DHCP server, select Disable, save, and restart the router.

7.At this point, the first wireless router and the second wireless router have successfully established WDS.

1. First of all, plug the product into the socket, and the power indicator light is on to indicate normal operation.

3. After connecting the signal of the repeater, enter it in the address bar of the browser to enter the setting interface.

4. Enter the username and password, the initial username and password are admin. After logging in and wearing the hood, select Trunk Mode.

5. Select the name of the router you want to connect to, and change the name of the repeater to an easy-to-remember name.

6. Enter the password of the original router vertically, and click Confirm to confirm the setting is successful.

Plug in the wireless wifi repeater and wait for a while for the indicator to be stable and normal.

1. Turn on the WLAN on your phone, find the wifi named after this wireless wifi repeater, then select it and connect to your phone.

2. Then a wireless wifi repeater management page will pop up, if it doesn't pop up, you can open the mobile phone browser, enter the access address marked on the wireless wifi repeater, you can open it, and then set a login password, and then click to start setting up the expander.

3. At this time, the wireless wifi repeater will automatically start scanning the available wireless wifi, and it takes a little time to scan for a while.

4. If there is no available wifi scanned for a long time, then you can directly click "manual entry" below.

5. On the new page that appears, enter the name of the available wireless wifi, and then enter the corresponding password, the name of the wireless extender can also be the same as the name of the wifi, and then click the extension button.

6. After the setting is completed, the page will automatically switch to the one shown in the figure below, which means that the setting on the wireless wifi repeater has been basically completed, at this time, just check the indicator light on the repeater, if it is green, then you can start using it.

1. Open your phone and click Browser.

3. After entering the router**, click Advanced Settings on the left, and then click Wireless Extension in the new pop-up page.

5. In the window of the scan result, find the network that needs to be extended, then click Connect, enter the wireless password and click Save.

6. After saving, return to the wireless settings page, set the wifi name and password of the router, and click Save below to realize the wireless relay.

Data Expansion: Basics of Repeaters:

1. The wireless repeater can simply regenerate the signal to expand the coverage of the wireless network.

2. The wireless repeater does not need to be physically connected to the network through cables. Repeaters can receive radio RF signals from access points, wireless client devices, or other repeaters, and can be relayed without changing the frequency.

3. Wireless repeater is an effective solution to solve the problem of router signal damage and weakness. For example, if the router does not have full coverage at home or in the office, it can be achieved by relaying it through repeaters.

Configuration of the router:

1.Enter " in the address bar, and then in the pop-up window, enter the default username: admin and password: admin 2, and in the WAN port settings, set the current Internet access mode, in this case, PPPoe dialing.

2.Set the basic wireless information, change the default SSID to AP1, enable the bridge function, and enter the wireless MAC address of AP2 in the box below.

3.The router keeps DHCP enabled.

Configuration of the router:

In the LAN port settings, change the LAN port IP address to , and then click Save.

The WAN port settings remain the default and unchanged.