What are some of your gear shift tips when driving an automatic car?

You don't have to change gears when you drive an automatic car, and if you want to use a party, you can hold that shift where you want to go, and that's it.

There are no special tricks, and I usually decide how I change gears based on the actual situation. Maybe the average person doesn't understand the essence of my shift.

When changing gears, wait for the speed to drop down, automatically pick up to the second gear, the second gear torque is large, especially when climbing and turning, the general car does not need to change gears when driving normally, and the first gear is used when the continuous turning slope is too steep.

It's an automatic car, it's more convenient, and then he doesn't have to think too much about a lot of things.

Strictly follow the requirements of the coach, safety first. The coach will teach you the best way.

The first is that he is very convenient, and then we can adjust our driving status according to this.

The automatic car does not need to change gears by itself, and it is more convenient to drive overall, and there are no special skills.

I don't know if I haven't driven an automatic transmission yet, and I haven't even gotten my driver's license yet, but I'm going to take the test this year, and I'll tell you when I'm done.

When I was driving an automatic, he would have more trouble changing gears, and she wasn't that simple.

When driving an automatic car, it will be more difficult to change gears, and he will first have to ask before he can change it.

I haven't changed gears, and D gear has gone all over the world.

Nowadays, most people choose to buy an automatic transmission when buying a car.

models, but there are also many car owners who do not know how to gear when driving automatic transmission models, in fact, automatic transmission cars need to change gears, but the method of shifting gears is very simple, which can make it easier for them to drive a car on the road. Especially for novice drivers, automatic transmission models will be more suitable and safer to drive. So how do you shift gears in a car with automatic tarding gear?

1. Normal shift of the gear knob automatic transmission model:

When we encounter a handlebar-type automatic transmission model, first we need to know the meaning of each letter on the gear plateP stands for Parking, R stands for Reversing and N stands for N StopNeutral, D for Forward Gear, S for Overtaking, andHand in oneatGearboxMedium plus minus gears。Generally, driving a car will press and hold the gear knob button to push into the forward gear, so that the car can drive normally. But we must not develop a bad habit of "D gear in the world", we must learn to use plus and minus gears to better protect the gearbox and engine, but also play a good role in fuel saving.

Second, the knob automatic transmission model normal shift:

For some high-end models, the car will use the knob gear, and the knob gear will make the car more advanced and the driver will be more convenient to operateHowever, the letters of the knob block represent the same meaning as the letter of the knob。When the owner of the car correspondsWhen driving in different environments, you need to rotate the knob to the corresponding place。There are many car owners who will not pay attention to the rotation error when using the knob gear, which is a very dangerous situation, so we must pay more attention when applying the knob gear.

The widespread use of automatic transmission is of great help to both the automotive industry and car owners, making their cars smarter, making their driving easier, and making their operations simpler. ButWe must also concentrate when driving a car, and we must not take it lightly.

Gear shifts are required. The gears are mostly P gear, N gear, D gear, R gear, empty balance S gear and L gear, in addition to D gear and S gear two gears to switch at will, other gears need to step on the brake bucket to do the car first, and then change gears.

The car with automatic reading gear does not need to change gears, because during driving, it will automatically switch gears according to your speed and speed, and there is no need to manually switch between them.

I think of course you need to change gears, and you need to push P to D at the start to drive.

It is necessary to change gears, to understand the needs of automatic transmission car shifting, according to the shift situation in this regard, it is necessary to know the lack of knowledge and change it. You should understand the needs of shifting, pay attention to the requirements of shifting sharply, and you can shift gears according to the observed situation.

It is necessary to change gears, understand the way of shifting, pay attention to the requirements of shifting, and shift gears through the correct operation method.

I think of course you need to change, for example, when you start to switch to D gear, and when you stop parking, you have to press the brakes to switch to P gear.

1. Starting skills. When starting an automatic transmission car, it is necessary to pay attention to the fact that before the car starts, it is necessary to ensure that the target is in P gear or N gear, and pay attention to the brake, handbrake and accelerator should be well coordinated when starting, and after hanging the D gear, release the handbrake while slowly lifting the brake (equivalent to the slow lifting clutch of the manual transmission car) and then tap the accelerator to let the vehicle start slowly. Do not slam on the accelerator, not only does it cost fuel, but also damages the vehicle.

Be careful not to release the brake pedal when gearing.

2. Acceleration skills. Some drivers think that as long as they start in D gear and increase the throttle all the way, they can drive at high speeds, but they don't know that this approach is very one-sided, and automatic transmission cars are not fully automatic. In the process of driving an automatic transmission car, especially when going up a hill and climbing a hill, the driver should give up the habit of "D" to the end.

Especially when climbing steep slopes, only using D gear, the driver will obviously feel that the car is relatively powerless to increase speed, at this time you might as well step back a gear, using the climbing gear (low gear) to climb, the car not only runs very powerful, but also drives more briskly. If you want to continue to accelerate, you can shift gears in the order of , d, and when you see that the tachometer reaches a certain value, you can immediately put it into a higher gear, so that you can make full use of the power of the engine and achieve the fastest acceleration effect.

3. Use low-speed gear in a timely manner. When driving an automatic car in D gear on the ramp, sometimes the resistance is greater and the throttle can not keep up with the easy cause the speed to drop, when the speed of the car model drops to a certain extent, the transmission will automatically reduce a gear, and then if the throttle driving force is greater than the resistance and the car accelerates, and then rises to a certain speed and rises to a higher gear. If the slope is very long, such repeated gear jumps will exacerbate the wear of the friction plates in the automatic transmission.

Therefore, the driver needs to choose a suitable gear according to the size of the slope and the road conditions, so that the transmission is always stable in this gear. The positive locking gear can effectively protect the friction plate and prolong its life.

4. Pay attention to timely oil collection. Automatic transmissions have to keep up with gas when driving on highways, but this is not the case in urban areas. No matter how fast or slow, most of the time the oil needs to be collected in time.

Especially in the traffic jam and traffic lights, if you close to the car in front of you before you put on the brakes, then the brake pad loss of the automatic transmission car will be very serious, and it will also cost fuel, and the occupants will feel unstable and feel that your driving skills are really average. Therefore, in order to save fuel, save maintenance costs and increase driving comfort, automatic transmission vehicles should collect fuel in time when they see a red light from a distance or when there is congestion in front of them.

5. Upshift in advance. In order to save fuel, reduce noise, and reduce engine wear, the method of "upshifting in advance" can be adopted. After the car starts smoothly, first quickly increase the car to a certain speed with a large throttle, then release the throttle, and hold for two or three seconds, then the automatic transmission can be upgraded from first gear to second gear, and when it feels like it has been upgraded, then press the accelerator to continue accelerating.

1. Under normal circumstances, the gears of the automatic transmission of the automatic transmission are divided into PRNDS or M, etc.

2. The essentials of automatic gear shifting, step on the brake, dial to D gear and release the brake, and the gear shift will be completed.

3. During driving, D and S gears can be switched freely, no need to step on the brakes, in addition to switching between the various gears, be sure to step on the brakes, dial the gear lever to the correct gear, and then release the brakes, loosen the brakes in advance, and will change the wrong gear.

4. During the process of automatic transmission, the computer will automatically adjust the clutch without manual intervention.

It is reasonable to say that a person can judge their driving skills by observing their shifting actions. Skilled shifting skills are out of reach for beginners. Let's take a look at seven tips for shifting gears.

Tip 1: Avoid shifting gears and look down at the gear lever.

Especially when driving on city streets or at high speeds, the coach said that changing gears and lowering the head can easily lead to deviation from the direction and accidents.

Tip 2: Avoid downshifting and don't blow up the air.

When downshifting, in gears with synchronizers, the one-foot clutch can be downshifted without adding empty oil, but it is easy to cause parts wear and early damage. Therefore, it is recommended to use both a two-foot clutch and a one-foot oil downshift, regardless of whether the vehicle has a synchronizer or not.

Tip 3: Avoid driving at low speeds for long periods of time.

Long-term low-speed driving, low speed but high speed, and less mileage per unit time, will relatively increase fuel consumption. Therefore, it is recommended that after the vehicle is started, as long as the low temperature is not cold, the gear should be raised to the appropriate level as soon as possible. In general, high grade is more fuel-efficient than low grade.

Tip 4: Avoid the deviation of the direction of the roller when changing gears.

Many people shift gears with their right hand and pull down the steering wheel with their left hand to steer the direction to the center of the road, causing the vehicle to cross the line or occupy the road. This is very dangerous. For your safety, don't do it.

Tip 5: When the car doesn't stop, avoid changing gears.

When the car is not stopping, the gear is still turning forward, and if you shift to reverse, it will be out of gear.

Tip 6: Avoid overstepping and blocking.

In practice, the owner should shift gears gradually, but not jump gears. Shifting is easy to cause the power of the car to be discontinuous, and downshifting will jump. Driving shift skills require frequent gear jumps.

Tip 7: After moving to neutral, avoid swinging the gear lever back and forth.

After the neutral gear is engaged, the gear lever is often unstable, shaking back and forth, and it is easy to call the section and cause wear and tear of the parts.

Of course, the gear shift action should be smooth and consistent, and the clutch should not be released too quickly. Although it is more troublesome to use your hands and feet, as long as you work hard to practice Datong Xi, I believe that you are not far from the skills of veterans.

The gears of automatic transmission cars are generally divided into prnds or m, we need to step on the brakes when shifting, and then dial to the gear they want to change, but release the brakes on it, we must pay attention to what kind of road surface to change what kind of gear when shifting, to avoid changing the wrong gear to cause wear and tear of the car or increase fuel consumption, D and S gears can not need to step on the brakes, free switching, in addition to these two gears, other gear switching need to step on the brakes.

A gear adjustment will be made according to the speed of the car, and an adjustment will be made according to your braking. Pay attention to the way of braking, also pay attention to the frequency of braking, pay attention to the way you step on the brakes, pay attention to your own way of operation, pay attention to the protection of the car, and also pay attention to the speed of stepping on the brakes.

First of all, you must step on the brake, shift the gear to D, and then release the brake to complete the shift, what you should pay attention to is that you must step on the brake during the gear swap, shift to the correct gear and then release the brake.

As we all know, it is very convenient for automatic transmission cars to shift gears, but some car owners use the wrong shift method, which has certain damage to the car, so how to change the automatic transmission car? Let's take a look at the correct way to shift gears in an automatic transmission.

1. N gear can avoid hanging the wrong D and R gears.

Some people drive carelessly, and it's not surprising that they get in the wrong gear. At this point, the n-gear is designed to be safer between forward and reverse gears. Because if there is no gear between the forward and reverse gears, then it is easy to put the wrong gear in close proximity.

It's okay to hang up other mistakes, but it's not a small matter to get the forward and backward gears wrong. If your car is only a few centimeters away from the wall behind you, and you want to move forward, but because the two gears are too close, you accidentally hang into the reverse gear, so the accident happens. And if there is an N gear between the two gears, the probability of an accident after hanging the wrong gear is greatly reduced.

2. The P block must be at the front.

P gear is the parking gear, as the name suggests is to dial the gear to the P gear when parking, and if your car does not stop completely must not be put into the P gear, because the P gear is mechanically locked, and the output shaft of the transmission is connected together, the car does not stop, the output shaft of the transmission will rotate. If you force the P gear to be engaged, the transmission will be damaged, and the P gear can be placed at the front to prevent the operation error when driving to change gears, and prevent the driver from shifting the gear to the P gear while driving.

3. The N block plays a buffering role between the D and R gears.

Anyone who knows how to drive knows that R gear is a reverse gear, D gear is a forward gear, and N gear is neutral. The N gear must be between R and D gears, and the reason why it is placed between these two gears is because the transmission of the AT model is hydraulic shifting, and the forward and reverse gears are reversed. In order to protect the planetary gears of the gearbox, the N gear acts as a buffer between the D and R gears, that is, when the D gears are converted to N gear, the oil pressure will return to zero.

1. The big button protruding from the head of the automatic gear lever is the gear lock, and the gear shift, especially when switching to the R gear P gear and the 1st gear, must be held down to switch, mainly to prevent misoperation. 2. On the side of the automatic gear lever, a small button with a slight convex button under the big button, with the word od written on it, which is the limit gear button, and the word o d off appears on the screen after pressing, which means that the gear has been limited to the maximum 3rd gear, and this gear can be used within 80 kilometers per hour, in order to prevent the car from frequently switching into high-speed gear and making the engine overloaded. 3. If it is the small button recessed in the upper left corner of the panel at the bottom of the gear lever, the word HOLD is written on it, and the meaning of hold is locked.

For example, if your car needs to move 1 meter back, and you don't want to start the car again, you can press the button, switch to N gear, put down the handbrake, and push the car manually.